Basis Informatie.
load Direction
radiaal lager
The Number of Rows
Single
Spherical
Non-Aligning Bearings
Outer Dimension
12mm-58mm
Transportpakket
Single Box Packing
Beschrijving
Zij zijn rollagers met cilindrische rollen die in diameter klein zijn. Ondanks hun lage dwarsdoorsnede, heeft het naaldlager een hoge lastcapaciteit en is daarom uiterst geschikt om regelingen te dragen waar de radiale ruimte beperkt is
levert de lagers van de naaldrol in verschillende ontwerpen en een brede waaier van grootte, die voor verschillende toepassingen aangewezen is. Naast aangepaste ontwerpen, bestaan zij uit de volgende types en de componenten:
Onze catalogus van het de rollager van de bedrijfnaald:
1. Het getrokken Lager van de Naald van de Kop: HK, BK seires
2. Het Dragen van de naald met BinnenRing: NA49, NA69, REEKS NKI
3. Het Dragen van de naald zonder BinnenRing: NK, de reeks van RNA
4. Het volledige Lager van de Naald van de Aanvulling: Reeks NAV
5. De radiale Rol en Kooi Assemblie van de Naald: K, reeks KK
6. De Assemblage van de Rol en van de Kooi van de Naald van de duw: AXK, ALS reeks
Inspectie
De dimensionale nauwkeurigheid van getrokken de rollagers van de kopnaald kan niet vóór het passen worden gemeten, als dun - de ommuurde buitenring zal uit rond tijdens productieproces zijn
De lagers verkrijgen de nauwkeurigheid wanneer slechts gedrukt in een huisvesting droegen met de geadviseerde tolerantiegrenzen
De ingeschreven diameter van de cirkel (FW) kan als volgt worden gecontroleerd;
Druk het lager in een normale ring en inspecteer de minimumafwijking van binnendiameter met cilindrische het beperken maat
Manufatures van GD ook andere soorten de lagers van de naaldrol en duimreeksen,
zoals gecombineerde radiale duwlagers,
Inleiding van het Lager van de Rol van de Naald
Een lager van de naaldrol is een lager dat kleine cilindrische rollen gebruikt.
Zij worden gebruikt om wrijving van een roterende oppervlakte te verminderen
De lagers van de naald hebben een grote oppervlakte die in contact met de lager buitenoppervlakten in vergelijking met kogellagers is. Bovendien er is minder toegevoegde ontruiming (verschil tussen de diameter van de schacht en de diameter van het lager) zodat zijn zij compacter.
De typische structuur bestaat uit een naaldkooi die oriënteert en de naaldrollen, de naaldrollen zelf, en een buitenrace (soms de huisvesting zelf) bevat.
De radiale naaldlagers zijn cilindrische en gebruiksrollen parallel met de as van de schacht. De de naaldlagers van de duw zijn vlak en gebruiken een radiaal patroon van naalden
De volledige aanvullingslagers hebben stevige binnen en buitenringen en rib-geleide cilindrische rollen. Aangezien deze lagers het grootste mogelijke aantal rollende elementen hebben, hebben zij uiterst hoge radiale lastcapaciteit en zijn in het bijzonder geschikt voor compacte ontwerpen.
Getrokken de rollagers van de kopnaald (de reeks van HK, BK reeks, MF MFY F FY SCE BCE reeks |
HK | Het doordringende Type van de lagers Getrokken Kop van de naaldrol |
HK… RS | Het doordringende Type van de lagers Getrokken Kop van de naaldrol, het Enige opgeruimde verzegelen |
HK… 2RS | De getrokken doordringende het type van Naald van de Kop lagers, verdubbelen verzegeld |
BK | Het type van verbinding de lagers Getrokken kop van de naaldrol |
BK… RS | Het type van verbinding de lagers Getrokken die kop van de naaldrol, aan één kant wordt verzegeld |
MF | Het type van verbinding de lagers Getrokken kop van de naaldrol, de GERICHTE LEEFTIJD van de NAALD |
MFY | Getrokken roltype van de kopnaald verbindingslagers, vlak over naald |
F | Het doordringende type van de lagers Getrokken kop van de naaldrol, gerichte naaldleeftijd |
FY | Het doordringende type van de lagers Getrokken kop van de naaldrol, Vlak hoofd over het naaldtype |
SCE | Het type van perforatie de lagers van de naaldrol, Getrokken kop, Engelse reeks |
BCE | Het type van verbinding de lagers Getrokken kop van de naaldrol, de reeks van de Duim |
Type | | | | | | |
BCH57 | 5/16 | 7.938 | 0.563 | 14.288 | 0.437 | 11.112 |
BCH68 | 3/8 | 9.525 | 0.625 | 15.875 | 0.5 | 12.7 |
BCH78 | 3/8 | 11.112 | 0.688 | 17.462 | 0.5 | 12.7 |
BCH87 | 1/2 | 12.7 | 0.75 | 19.05 | 0.438 | 11.112 |
BCH88 | 1/2 | 12.7 | 0.75 | 19.05 | 0.5 | 12.7 |
BCH810 | 1/2 | 12.7 | 0.75 | 19.05 | 0.625 | 15.875 |
BCH812 | 1/2 | 12.7 | 0.75 | 19.05 | 0.75 | 19.05 |
BCH98 | 9/16 | 14.288 | 0.813 | 20.638 | 0.5 | 12.7 |
BCH910 | 9/16 | 14.288 | 0.813 | 20.638 | 0.625 | 15.875 |
BCH912 | 9/16 | 14.288 | 0.813 | 20.638 | 0.75 | 19.05 |
BCH108 | 5/8 | 15.875 | 0.875 | 22.225 | 0.5 | 12.7 |
BCH1010 | 5/8 | 15.875 | 0.875 | 22.225 | 0.625 | 15.875 |
BCH1012 | 5/8 | 15.875 | 0.875 | 22.225 | 0.75 | 19.05 |
BCH1016 | 5/8 | 15.875 | 0.875 | 22.225 | 1 | 25.4 |
BCH117 | 11/16 | 17.462 | 0.938 | 23.812 | 0.437 | 11.112 |
BCH1110 | 11/16 | 17.462 | 0.938 | 23.812 | 0.625 | 15.875 |
BCH1112 | 11/16 | 17.462 | 0.938 | 23.812 | 0.75 | 19.05 |
BCH1212 | 3/4 | 19.05 | 1.063 | 26.988 | 0.75 | 19.05 |
BCH1310 | 13/16 | 20.638 | 1.125 | 28.575 | 0.625 | 15.875 |
BCH1312 | 13/16 | 20.638 | 1.125 | 28.575 | 0.75 | 19.05 |
Type | | | | | | |
BCH1412 | 7/8 | 22.225 | 1.188 | 30.162 | 0.75 | 19.05 |
BCH1416 | 7/8 | 22.225 | 1.188 | 30.162 | 1 | 25.4 |
BCH1610 | 1 | 25.4 | 1.313 | 33.338 | 0.625 | 15.875 |
BCH1612 | 1 | 25.4 | 1.313 | 33.338 | 0.75 | 19.05 |
BCH1616 | 1 | 25.4 | 1.313 | 33.338 | 1 | 25.4 |
BCH1810 | 1 1/8 | 28.575 | 1.5 | 38.1 | 0.625 | 15.875 |
BCH1812 | 1 1/8 | 28.575 | 1.5 | 38.1 | 0.75 | 19.05 |
BCH1816 | 1 1/8 | 28.575 | 1.5 | 38.1 | 1 | 25.4 |
BCH1818 | 1 1/8 | 28.575 | 1.5 | 38.1 | 1.125 | 28.575 |
BCH1820 | 1 1/8 | 28.575 | 1.5 | 38.1 | 1.25 | 31.75 |
BCH208 | 1 1/4 | 31.75 | 1.625 | 41.275 | 0.5 | 12.7 |
BCH2012 | 1 1/4 | 31.75 | 1.625 | 41.275 | 0.75 | 19.05 |
BCH2016 | 1 1/4 | 31.75 | 1.625 | 41.275 | 1 | 25.4 |
BCH2020 | 1 1/4 | 31.75 | 1.625 | 41.275 | 1.25 | 31.75 |
BCH2216 | 1 3/8 | 34.925 | 1.75 | 44.45 | 1 | 25.4 |
Schacht Diameter | Dragende Benoeming | Massa Ong. | BoundaryDimensions | BasicLoadRating | Het beperken van Snelheid |
CurrentCode | OriginalCode | Fw | D | C | Dynamisch | Statisch | Olie |
mm | g | mm | N | t/min |
12.7 | BHA 88ZOH | | 0.0104 | 12.7 | 19.05 | 12.7 | 620 | 680 | 30000 |
BHA 810ZOH | | 0.0125 | 12.7 | 19.05 | 15.88 | 900 | 1110 | 30000 |
17.462 | BHA 1112ZOH | | 0.0193 | 17.462 | 23.812 | 19.05 | 1350 | 2020 | 25000 |
25.4 | BHA 1612 | | 0.0335 | 25.4 | 33.338 | 19.05 | 1970 | 3030 | 15000 |
28.575 | BHA 1816ZOH | | 0.06 | 28.575 | 38.1 | 25.4 | 3050 | 4950 | 13000 |
31.75 | BHA 2020ZOH | | 0.0815 | 31.75 | 41.275 | 31.75 | 4080 | 7100 | 12000 |
Open eind | Gesloten eind | Fw mm | D mm | C mm |
SCE57 | BCE57 | 7.938 | 12.700 | 11.112 |
SCE59 | BCE59 | 7.938 | 12.700 | 14.288 |
SCH57 | BCH57 | 7.938 | 14.288 | 11.112 |
SCE65 | BCE65 | 9.525 | 14.288 | 7.938 |
SCE66 | BCE66 | 9.525 | 14.288 | 9.525 |
SCE67 | BCE67 | 9.525 | 14.288 | 11.112 |
SCE68 | BCE68 | 9.525 | 14.288 | 12.700 |
SCE610 | BCE610 | 9.525 | 15.875 | 15.875 |
SCH68 | BCH68 | 9.525 | 15.875 | 12.700 |
SCE88 | BCE88 | 12.700 | 17.462 | 12.700 |
SCE810 | BCE810 | 12.700 | 17.462 | 15.875 |
SCE812 | BCE812 | 12.700 | 17.462 | 19.050 |
15.875 | SCE108 | BCE108 | 15.875 | 20.638 | 12.7 | 8743 | 12015 | 16000 | |
SCE1010 | BCE1010 | 15.875 | 20.638 | 15.88 | 10368 | 16242 | 16000 | |
SCE1012 | BCE1012 | 15.875 | 20.638 | 19.05 | 12015 | 19802 | 16000 | |
17.462 | SCE116 | BCE116 | 17.462 | 22.225 | 9.52 | 5740 | 7876 | 15000 | |
19.05 | SCE1210 | BCE1210 | 19.05 | 25.4 | 15.88 | 12682 | 17577 | 13000 | |
SCE1212 | BCE1212 | 19.05 | 25.4 | 19.05 | 15352 | 22250 | 13000 | |
20.638 | SCE1312 | BCE1312 | 20.638 | 26.988 | 19.05 | 16020 | 23585 | 12000 | |
22.225 | SCE148 | BCE148 | 22.225 | 28.575 | 12.7 | 11125 | 15797 | 11000 | |
SCE1412 | BCE1412 | 22.225 | 28.575 | 19.05 | 16910 | 27145 | 11000 | |
23.812 | SCE1516 | BCE1516 | 23.812 | 30.162 | 25.4 | 24030 | 43165 | 11000 | |
25.4 | SCE168 | BCE168 | 25.4 | 31.75 | 12.7 | 12682 | 19135 | 10000 | |
SCE1612 | BCE1612 | 25.4 | 31.75 | 19.05 | 18022 | 30260 | 10000 | |
SCE1616 | BCE1616 | 25.4 | 31.75 | 25.4 | 24920 | 45390 | 10000 | |
28.575 | SCE188 | BCE188 | 28.575 | 34.925 | 12.7 | 12905 | 20247 | 9000 | |
SCE1812 | BCE1812 | 28.575 | 34.925 | 19.05 | 18912 | 33375 | 9000 | |
SCE1816 | BCE1816 | 28.575 | 34.925 | 25.4 | 25810 | 49395 | 9000 | |
31.75 | SCE2012 | BCE2012 | 31.75 | 38.1 | 19.05 | 21137 | 39605 | 8000 | |
SCE2016 | BCE2016 | 31.75 | 38.1 | 25.4 | 27145 | 54735 | 8000 | |
34.925 | SCE2212 | BCE2212 | 34.925 | 41.275 | 19.05 | 21360 | 42720 | 7500 | |
SCE2216 | BCE2216 | 34.925 | 41.275 | 25.4 | 27590 | 59185 | 7500 | |
38.1 | SCE2416 | BCE2416 | 38.1 | 47.625 | 25.4 | 38715 | 66305 | 6500 | |
40.45 | SCE2816 | BCE2816 | 44.45 | 53.975 | 25.4 | 41385 | 75650 | 6000 | |
50.8 | SCE3220 | BCE3220 | 50.8 | 60.325 | 31.75 | 55180 | 115700 | 5000 | |
Schacht Diameter | Het dragen van Benoeming | Massa Ong. | BoundaryDimensions | BasicLoadRating | Het beperken van Snelheid | CurrentCode | OriginalCode | Fw | D | C | Dynamisch | Statisch | Olie | mm | g | mm | N | t/min | | | | | | | | | | |
12.7 | SCH 87 | | 0.009 | 12.7 | 19.05 | 11.13 | | | | 14.29 | SCH 910 | | 0.013 | 14.29 | 20.64 | 15.88 | | | | SCH 912 | | 0.017 | 14.29 | 20.64 | 19.05 | | | | 15.875 | SCH 108 | | 0.013 | 15.875 | 22.225 | 12.7 | | | | SCH 1012 | | 0.019 | 15.875 | 22.225 | 19.05 | | | | 22.225 | SCH 1412 | | 0.032 | 22.225 | 30.162 | 19.05 | | | | SCH 1413 | | | 22.225 | 30.162 | 20.64 | | | | SCH 1413P | | | 22.225 | 30.162 | 20.64 | | | | SCH 1416PP | | | 22.225 | 30.162 | 25.4 | | | | SCH 1416 | | 0.043 | 22.225 | 30.162 | 25.4 | | | | 25.4 | SCH 1612 | | 0.036 | 25.4 | 33.338 | 19.05 | | | | SCH 1614P | | | 25.4 | 33.338 | 22.22 | | | | SCH 1616 | | 0.047 | 25.4 | 33.338 | 25.4 | | | | 28.575 | SCH 1812 | | 0.048 | 28.575 | 38.1 | 19.05 | | | | SCH 1816 | | 0.063 | 28.575 | 38.1 | 15.4 | | | | 31.75 | SCH 2016 | | 0.071 | 31.75 | 41.28 | 25.4 | | | | 34.925 | SCH 2213P | | | 34.925 | 44.45 | 20.62 | | | | 9.525 | BCH 68 | | 0.0082 | 9.525 | 15.875 | 12.7 | 500 | 480 | 40000 | 17.02 | BCH 06604 | | | 17.02 | 23.83 | 17.53 | | | | 31.75 | BCH 2020 | | 0.0815 | 31.75 | 41.275 | 31.75 | 4080 | 7100 | 12000 |
|
| | |
Type | | | | | | |
BCH57 | 5/16 | 7.938 | 0.563 | 14.288 | 0.437 | 11.112 |
BCH68 | 3/8 | 9.525 | 0.625 | 15.875 | 0.5 | 12.7 |
BCH78 | 3/8 | 11.112 | 0.688 | 17.462 | 0.5 | 12.7 |
BCH87 | 1/2 | 12.7 | 0.75 | 19.05 | 0.438 | 11.112 |
BCH88 | 1/2 | 12.7 | 0.75 | 19.05 | 0.5 | 12.7 |
BCH810 | 1/2 | 12.7 | 0.75 | 19.05 | 0.625 | 15.875 |
BCH812 | 1/2 | 12.7 | 0.75 | 19.05 | 0.75 | 19.05 |
BCH98 | 9/16 | 14.288 | 0.813 | 20.638 | 0.5 | 12.7 |
BCH910 | 9/16 | 14.288 | 0.813 | 20.638 | 0.625 | 15.875 |
BCH912 | 9/16 | 14.288 | 0.813 | 20.638 | 0.75 | 19.05 |
BCH108 | 5/8 | 15.875 | 0.875 | 22.225 | 0.5 | 12.7 |
BCH1010 | 5/8 | 15.875 | 0.875 | 22.225 | 0.625 | 15.875 |
BCH1012 | 5/8 | 15.875 | 0.875 | 22.225 | 0.75 | 19.05 |
BCH1016 | 5/8 | 15.875 | 0.875 | 22.225 | 1 | 25.4 |
BCH117 | 11/16 | 17.462 | 0.938 | 23.812 | 0.437 | 11.112 |
BCH1110 | 11/16 | 17.462 | 0.938 | 23.812 | 0.625 | 15.875 |
BCH1112 | 11/16 | 17.462 | 0.938 | 23.812 | 0.75 | 19.05 |
BCH1212 | 3/4 | 19.05 | 1.063 | 26.988 | 0.75 | 19.05 |
BCH1310 | 13/16 | 20.638 | 1.125 | 28.575 | 0.625 | 15.875 |
BCH1312 | 13/16 | 20.638 | 1.125 | 28.575 | 0.75 | 19.05 |
Type | | | | | | |
BCH1412 | 7/8 | 22.225 | 1.188 | 30.162 | 0.75 | 19.05 |
BCH1416 | 7/8 | 22.225 | 1.188 | 30.162 | 1 | 25.4 |
BCH1610 | 1 | 25.4 | 1.313 | 33.338 | 0.625 | 15.875 |
BCH1612 | 1 | 25.4 | 1.313 | 33.338 | 0.75 | 19.05 |
BCH1616 | 1 | 25.4 | 1.313 | 33.338 | 1 | 25.4 |
BCH1810 | 1 1/8 | 28.575 | 1.5 | 38.1 | 0.625 | 15.875 |
BCH1812 | 1 1/8 | 28.575 | 1.5 | 38.1 | 0.75 | 19.05 |
BCH1816 | 1 1/8 | 28.575 | 1.5 | 38.1 | 1 | 25.4 |
BCH1818 | 1 1/8 | 28.575 | 1.5 | 38.1 | 1.125 | 28.575 |
BCH1820 | 1 1/8 | 28.575 | 1.5 | 38.1 | 1.25 | 31.75 |
BCH208 | 1 1/4 | 31.75 | 1.625 | 41.275 | 0.5 | 12.7 |
BCH2012 | 1 1/4 | 31.75 | 1.625 | 41.275 | 0.75 | 19.05 |
BCH2016 | 1 1/4 | 31.75 | 1.625 | 41.275 | 1 | 25.4 |
BCH2020 | 1 1/4 | 31.75 | 1.625 | 41.275 | 1.25 | 31.75 |
BCH2216 | 1 3/8 | 34.925 | 1.75 | 44.45 | 1 | 25.4 |
Schacht Diameter | Het dragen van Benoeming | Massa Ong. | De Dimensies van de grens | De Classificatie van Basi cLoad | Het beperken van Snelheid |
Huidige Code | Originele Code | Fw | D | C | Dynamisch | Statisch | Olie |
mm | g | mm | N | t/min |
4 | TLA 48 | | 1.6 | 4 | 8 | 4 | 140 | 100 | 75000 |
5 | TLA 59 | | 1.8 | 5 | 9 | 9 | 190 | 160 | 65000 |
6 | TLA 69 | | | 6 | 10 | 9 | 210 | 190 | 55000 |
7 | TLA 79 | | 2 | 7 | 11 | 9 | 250 | 250 | 50000 |
8 | TLA 810 | | 2.1 | 8 | 12 | 10 | 340 | 370 | 45000 |
Ta 810 | | | 8 | 15 | 10 | 350 | 290 | 45000 |
Ta 815 | | | 8 | 15 | 15 | 590 | 570 | 45000 |
9 | Ta 912 | | 1.8 | 9 | 16 | 12 | 520 | 500 | 45000 |
Ta 916 | | 2.1 | 9 | 16 | 16 | 710 | 740 | 45000 |
10 | TLA 1010 | | 2.2 | 10 | 14 | 10 | | | |
TLAM 1010 | | 2.2 | 10 | 14 | 10 | | | |
TLA 1012 | | 2.6 | 10 | 14 | 12 | | | |
TLAM 1012 | | 2.3 | 10 | 14 | 12 | | | |
TLA 1014 2RS | | 2.5 | 10 | 14 | 14 | | | |
TLA 1015 | | | 10 | 14 | 15 | | | |
Ta 101610 | | 2.3 | 10 | 16 | 10 | | | |
Ta 1012 | | 2.9 | 10 | 17 | 12 | | | |
Ta 1010 | | | 10 | 17 | 1O | 420 | 390 | 40000 |
Ta 1012 | | 2.2 | 10 | 17 | 12 | 570 | 570 | 40000 |
12 | TLA 1212 | | 2.4 | 12 | 18 | 12 | | | |
Ta 1212 | | 2.7 | 12 | 19 | 12 | 610 | 640 | 35000 |
Ta 1215 | | | 12 | 19 | 15 | 760 | 850 | 35000 |
TLA 1216 2RS | | 3 | 12 | 18 | 16 | | | |
1 3 | TLA 1312 | | 3 | 13 | 19 | 12 | 690 | 830 | 30000 |
14 | TLA 1412 | | 3.4 | 14 | 20 | 12 | | | |
TLA 1416 | | | 14 | 20 | 16 | | | |
TLA 1416 2RS | | 5.35 | 14 | 20 | 16 | | | |
Ta 1420 | | 5.8 | 14 | 22 | 20 | 1410 | 1760 | 30000 |
15 | TLA 1512 | | 6.6 | 15 | 21 | 12 | | | |
TLAM 1516 | | 3 | 15 | 21 | 16 | | | |
Ta 1510 | | 3.4 | 15 | 22 | 10 | 540 | 580 | 25000 |
Ta 1512 | | 4 | 15 | 22 | 12 | 730 | 850 | 25000 |
16 | TLA 1612 | | 4.3 | 16 | 22 | 12 | | | |
TLA 1616 | | 4.1 | 16 | 22 | 16 | | | |
Ta l616 | | 4.6 | 16 | 24 | 16 | 1130 | 1350 | 25000 |
Ta 1620 | | 4.9 | 16 | 24 | 20 | 1490 | 1940 | 25000 |
17 | TLA l72220 | | 5.6 | 17 | 22 | 20 | | | |
TLA l72318 | | | 17 | 23 | 18 | | | |
Ta l715 | | | 17 | 24 | 15 | 980 | 1300 | 25000 |
Dragende Benoeming | De Diameter van de schacht (mm) | Massa ong. (G) | BoundaryDimensions mm | De basis Classificatie van de Lading (n) | Het beperken van Snelheid (t/min) |
Fw | D | C | Dynamisch | Statisch |
TLA 2012 | 20 | | 20 | 26 | 12 | | | |
TLA 2016 | | 20 | 26 | 16 | | | |
TLAM 2020 | | 20 | 26 | 20 | | | |
Ta 2015 | 20 | 20 | 27 | 15 | 1060 | 1490 | 20000 |
Ta 2116 | 21 | 25 | 21 | 29 | 16 | 1350 | 1840 | 19000 |
Ta 2120 | 31.5 | 21 | 29 | 20 | 1790 | 2640 | 19000 |
Ta 2210 | 22 | 15 | 22 | 29 | 10 | 680 | 870 | 18000 |
Ta 2215 | 21.5 | 22 | 29 | 15 | 1130 | 1670 | 18000 |
Ta 2420 | 24 | 31 | 24 | 31 | 20 | 1730 | 2980 | 16000 |
TLA 2530 | 25 | | 25 | 32 | 30 | | | |
Ta 2510 | 19.1 | 25 | 33 | 1O | 810 | 1010 | 15000 |
Ta 2515 | 28.5 | 25 | 33 | 15 | 1370 | 1970 | 15000 |
Ta 2616 | 26 | 30.5 | 26 | 34 | 16 | 1550 | 2330 | 15000 |
Ta 2620 | 38 | 26 | 34 | 20 | 2050 | 3350 | 15000 |
TLA 2820 | 28 | | 28 | 35 | 20 | | | |
Ta 2820 | 45 | 28 | 37 | 20 | 2160 | 3290 | 13000 |
Ta 2830 | 67.5 | 28 | 37 | 30 | 3370 | 5800 | 13000 |
Ta 2920 | 29 | 47 | 29 | 38 | 20 | 2250 | 3480 | 13000 |
Ta 2930 | 70 | 29 | 38 | 30 | 3490 | 6140 | 13000 |
TLA 3012 | 30 | 23.5 | 30 | 37 | 12 | 1060 | 1700 | 12000 |
Ta 3013 | 36.5 | 30 | 40 | 13 | 1370 | 1710 | 12000 |
Ta 3015 | 42 | 30 | 40 | 15 | 1720 | 2280 | 12000 |
TLA 3026 | 49 | 30 | 37 | 26 | 2530 | 5190 | 12000 |
TLA 303730 | | 30 | 37 | 30 | | | |
TLA 3038 | | 30 | 37 | 38 | | | |
TLAM 303746 | | 30 | 37 | 46 | | | |
TLA 303815 | | 30 | 38 | 15 | | | |
TLA 303816 | | 30 | 38 | 16 | | | |
TLA 3030 | | 30 | 40 | 30 | | | |
Ta 3220 | 32 | 57.5 | 32 | 42 | 30 | 2590 | 3940 | 11000 |
Ta 3230 | 86 | 32 | 42 | 30 | 4030 | 6970 | 11000 |
TLA 3516 | 35 | | 35 | 42 | 16 | | | |
TLA 3520 | | 35 | 42 | 20 | | | |
TLA 354320 | | 35 | 43 | 20 | | | |
Ta 3512 | 38.5 | 35 | 45 | 12 | 1510 | 2030 | 10000 |
Ta 3515 | 48 | 35 | 45 | 15 | 1890 | 2710 | 10000 |
Ta 3520 | 62.5 | 35 | 45 | 20 | 2760 | 4400 | 10000 |
Ta 3530 | | 35 | 45 | 30 | | | |
Het dragen van Code. Norm | Massa (g) | Het dragen van Code. Gesloten Eind | Massa (g) | De Dimensies van de grens | De basis Classificatie van de Lading (KN) | Het beperken van snelheid (t/min) |
Fw | D | C | C1 | Cr | Cor |
HK0306TN | 1 | BK0306TN | 1 | 3 | 6.5 | 6 | 5.2 | 0.948 | 0.672 | 36800 |
HK0408TN | 2 | BK0408TN | 2.1 | 4 | 8 | 8 | 6.4 | 1.424 | 1.048 | 32800 |
HK0509 | 2 | BK0509 | 2 | 5 | 9 | 9 | 7.4 | 1.92 | 1.592 | 30400 |
HK0608 | 2.1 | - | - | 6 | 10 | 8 | - | 1.624 | 1.32 | 28000 |
HK0609 | 2.5 | BK0609 | 2.6 | 6 | 10 | 9 | 7.4 | 2.28 | 2.08 | 28000 |
HK0709 | 2.6 | BK0709 | 2.9 | 7 | 11 | 9 | 7.4 | 2.48 | 2.36 | 24800 |
HK0808 | 2.7 | BK0808 | 3 | 8 | 12 | 8 | 6.4 | 2.2 | 2.08 | 22400 |
HK0810 | 3 | BK0810 | 3.4 | 8 | 12 | 10 | 8.4 | 3.04 | 3.16 | 22400 |
HK0908 | 3 | BK0908 | - | 9 | 13 | 8 | - | 2.84 | 3 | 20000 |
HK0910 | 4 | BK0910 | 4.3 | 9 | 13 | 10 | 8.4 | 3.4 | 3.72 | 20000 |
HK0912 | 4.6 | BK0912 | 4.9 | 9 | 13 | 12 | 10.4 | 4.24 | 5.04 | 20000 |
HK1010 | 4.1 | BK1010 | 4.3 | 10 | 14 | 10 | 8.4 | 3.52 | 4.08 | 18400 |
HK1012 | 4.8 | BK1012 | 5 | 10 | 14 | 12 | 10.4 | 4.4 | 5.44 | 184000 |
HK1015 | 6 | BK1015 | 6.2 | 10 | 14 | 15 | 13.4 | 5.44 | 7.04 | 18400 |
HK1210 | 4.6 | BK1015 | 5.2 | 12 | 16 | 10 | 8.4 | 3.96 | 4.96 | 16000 |
HK1212 | 9 | BK1212 | 10 | 12 | 18 | 12 | 9.3 | 5.2 | 5.84 | 15200 |
HK1312 | 10 | BK1312 | 11 | 13 | 19 | 12 | 9.3 | 5.44 | 6.32 | 14400 |
HK1412 | 10.5 | BK1412 | 12 | 14 | 20 | 12 | 9.3 | 5.68 | 6.8 | 12800 |
HK1512 | 11 | BK1512 | 13 | 15 | 21 | 12 | 9.3 | 6.32 | 7.52 | 12800 |
HK1516 | 15 | BK1516 | 17 | 15 | 21 | 16 | 13.3 | 8.4 | 11.52 | 12800 |
HK1612 | 12 | BK1612 | 14 | 16 | 22 | 12 | 9.3 | 6.08 | 7.76 | 12000 |
HK1616 | 16 | BK1616 | 18 | 16 | 22 | 16 | 13.3 | 8.72 | 12.24 | 12000 |
HK1712 | 12 | BK1712 | - | 17 | 23 | 12 | - | 6.32 | 8.24 | 11200 |
HK1812 | 13 | BK1812 | 15 | 18 | 24 | 12 | 9.3 | 6.48 | 8.72 | 10400 |
HK1816 | 18 | BK1816 | 20 | 18 | 24 | 16 | 13.3 | 9.28 | 13.84 | 10400 |
Schacht Diameter | Het dragen van Benoeming | Massa Ong. | De Dimensies van de grens | De basis Classificatie van de Lading | Het beperken Snelheid |
Huidig | De Code van Oreginal | Fw | D | C | Dynamisch Cr | Cor Statisch | Olie |
mm | g | mm | N | t/min |
20 | HK20*27*20 | | 82 | 20 | 27 | 20 | 26300 | 47800 | 9900 |
HK20*27*30 | | 94 | 20 | 27 | 30 | 28500 | 48800 | 9900 |
HK20*28*16 | 47942/20 | 28.5 | 20 | 28 | 16 | 29600 | 49800 | 9900 |
HK20*29*18 | | 41 | 20 | 29 | 18 | 30900 | 54600 | 9900 |
22 | HK22*28*7.5TN | | 8.8 | 22 | 28 | 7.5 | 5200 | 7000 | 10010 |
HK2210 | 27941/22 | 12.3 | 22 | 28 | 10 | 7200 | 9500 | 10010 |
HK2212 | 37941/22 | 15 | 22 | 28 | 12 | 8100 | 10400 | 10010 |
BK2212 | 35941/22 | 18.1 | 22 | 28 | 12 | 8100 | 10400 | 10010 |
HK2216 | 57941/22 | 20.9 | 22 | 28 | 16 | 11400 | 18100 | 10010 |
BK2216 | 55941/22 | 24.3 | 22 | 28 | 16 | 11400 | 18100 | 10010 |
HK2220 | 77941/22 | 26.2 | 22 | 28 | 20 | 14500 | 25000 | 10010 |
BK2220 | 75941/22 | 29.9 | 22 | 28 | 20 | 14500 | 25000 | 10010 |
HK2230 | | 32 | 22 | 28 | 30 | 17500 | 30400 | 9000 |
HK22*29*25 | | 37 | 22 | 29 | 25 | 18100 | 31500 | 9000 |
HK22*29*30 | | 43 | 22 | 29 | 30 | 19400 | 33100 | 9000 |
HK22*30*14 | 37942/22 | 21.9 | 22 | 30 | 14 | 19800 | 34000 | 9000 |
24 | HK24*30*7.5TN | | 10.6 | 24 | 30 | 7.5 | 5800 | 7200 | |
25 | HK2512 | 27941/25 | 20 | 25 | 32 | 12 | 10000 | 14200 | 9000 |
BK2512 | 25941/25 | 23.2 | 25 | 32 | 12 | 10000 | 14200 | 9000 |
HK2514 | 37941/25 | 21.9 | 25 | 32 | 14 | 13600 | 18700 | 9000 |
HK2516 | 7941/25 | 27.3 | 25 | 32 | 16 | 13600 | 20000 | 9000 |
BK2516 | 7941/25 | 31 | 25 | 32 | 16 | 13600 | 50000 | 9000 |
HK2518 | 57941/25 | 28.2 | 25 | 32 | 18 | 17500 | 25800 | 9000 |
HK2520 | 67941/25 | 34.1 | 25 | 32 | 20 | 17900 | 30000 | 9000 |
BK2520 | 65941/25 | 38.7 | 25 | 32 | 20 | 17900 | 30000 | 9000 |
HK2525 | 7942/25 | 40 | 25 | 32 | 25 | 22200 | 36700 | 9000 |
HK2526 | | 44.8 | 25 | 32 | 26 | 22500 | 42000 | 9000 |
BK2526 | | 49 | 25 | 32 | 26 | 22500 | 42000 | 9000 |
HK2538 | 87941/25 | 64.7 | 25 | 32 | 38 | 30000 | 58000 | 9000 |
BK2538 | 85941/25 | 69 | 25 | 32 | 38 | 30000 | 58000 | 9000 |
HK25*33*10 | | 17 | 25 | 33 | 10 | 34800 | 69600 | 9000 |
HK25*33*15 | | 27.4 | 25 | 33 | 15 | 35700 | 70000 | 9000 |
HK25*35*20 | 57942/25 | 44.9 | 25 | 35 | 20 | 36100 | 78650 | 8700 |
28 | HK2816 | 47941/28 | 30.1 | 28 | 35 | 16 | 15400 | 22500 | 8700 |
BK2816 | 45941/28 | 34.1 | 28 | 35 | 16 | 15400 | 22500 | 8700 |
HK2818 | 57941/28 | 31.7 | 28 | 35 | 18 | 18500 | 29300 | 8700 |
HK2820 | 67941/28 | 37.6 | 28 | 35 | 20 | 18900 | 32000 | 8700 |
BK2820 | 65941/28 | 43 | 28 | 35 | 20 | 18900 | 32000 | 8700 |
30 | HK3012 | 27941/30 | 24 | 30 | 37 | 12 | 10100 | 16200 | 8100 |
Schacht Diameter | Dragende Benoeming | Massa Ong. | De Dimensies van de grens | De basis Classificatie van de Lading | Het beperken Snelheid |
Huidig | De Code van Oreginal | Fw | D | C | Dynamisch Cr | Cor Statisch | Olie |
mm | g | mm | N | t/min |
30 | BK3012 | 25941/30 | 27.9 | 30 | 37 | 12 | 10100 | 16200 | 8100 |
HK3016 | 47941/30 | 32 | 30 | 37 | 16 | 15200 | 27000 | 8100 |
BK3016 | 45941/30 | 37.1 | 30 | 37 | 16 | 15200 | 27000 | 8100 |
HK3018 | 57941/30 | 33.6 | 30 | 37 | 18 | 19200 | 31500 | 8100 |
HK3020 | 67941/30 | 40.1 | 30 | 37 | 20 | 19700 | 33500 | 8100 |
BK3020 | 65941/30 | 46.5 | 30 | 37 | 20 | 19700 | 33500 | 8100 |
HK3026 | | 52.9 | 30 | 37 | 26 | 24000 | 50000 | 8100 |
BK3026 | | 59.4 | 30 | 37 | 26 | 24000 | 50000 | 8100 |
HK3038 | | 76.1 | 30 | 37 | 38 | 32500 | 74000 | 8100 |
BK3038 | | 82.5 | 30 | 37 | 38 | 32500 | 74000 | 8100 |
HK30*38*12 | 27941/30K | 28 | 30 | 38 | 12 | 38100 | 80000 | 8100 |
HK30*38*16 | 7941/30 | 32.7 | 30 | 38 | 16 | 39000 | 82000 | 8100 |
HK30*38*24 | 7942/30 | 49 | 30 | 38 | 24 | 39910 | 88800 | 8100 |
HK30*38*32 | 7943/30 | 69 | 30 | 38 | 32 | 38890 | 88700 | 8100 |
32 | HK32*38*11 | | 17 | 32 | 38 | 11 | 19700 | 43200 | 7800 |
HK3224 | 77941/32 | 50.7 | 32 | 38 | 24 | 15500 | 52000 | 7300 |
HK3232 | 97941/32 | 66.4 | 32 | 39 | 32 | 22600 | 54300 | 7100 |
HK32*19*16 | | | 32 | 19 | 16 | | | |
HK32*40*32 | 7943/32 | 72.7 | 32 | 39 | 32 | 27990 | 59890 | 7100 |
HK32*41*16 | | | 32 | 41 | 16 | | | |
35 | HK3512 | 27941/35 | 27.7 | 35 | 40 | 12 | 12100 | 19300 | 7100 |
BK3512 | 25941/35 | 32.9 | 35 | 42 | 12 | 12100 | 19300 | 7100 |
HK3516 | 47941/35 | 36.9 | 35 | 42 | 16 | 15700 | 27500 | 7100 |
BK3516 | | 43.8 | 35 | 42 | 16 | 45700 | 27500 | 7100 |
HK3520 | | 46.1 | 35 | 42 | 20 | 20800 | 41000 | 7100 |
BK3520 | 65941/35 | 54.8 | 35 | 42 | 20 | 20800 | 41000 | 7100 |
HK35*43*16 | 7941/35 | 37 | 35 | 42 | 16 | 24200 | 47100 | 7100 |
HK35*43*25 | 7942/35 | 60.5 | 35 | 43 | 25 | 24440 | 48200 | 6200 |
HK35*43*32 | 7943/35 | 80 | 35 | 43 | 32 | 24870 | 48880 | 6200 |
HK35*45*12 | | 31 | 35 | 45 | 12 | 24870 | 48880 | 6200 |
36 | HK36*42*12 | | 23 | 36 | 42 | 12 | 15000 | 21000 | 6200 |
38 | HK38*48*30 | | 102 | 38 | 48 | 30 | 16100 | 24100 | 6000 |
40 | HK4012 | 27941/40 | 31.1 | 40 | 47 | 12 | 14000 | 24300 | 6300 |
BK4012 | 25941/40 | 38.2 | 40 | 47 | 12 | 14000 | 24300 | 6300 |
HK4016 | 47941/40 | 41.4 | 40 | 47 | 16 | 20000 | 38500 | 6300 |
BK4016 | 45941/40 | 51 | 40 | 47 | 16 | 20000 | 38500 | 6300 |
HK4020 | 67941/40 | 51.8 | 40 | 47 | 20 | 25500 | 52000 | 6300 |
BK4020 | 65941/40 | 62 | 40 | 47 | 20 | 25500 | 52000 | 6300 |
HK40*50*32 | 7942/40 | 114.3 | 40 | 50 | 32 | 23000 | 42000 | 6000 |
HK40*50*38 | 7943/40 | 130.8 | 40 | 50 | 38 | 24100 | 43000 | 6000 |
45 | HK4512 | 27941/45 | 34.8 | 45 | 52 | 12 | 12900 | 22500 | 5800 |
Schacht Diameter | Dragende Benoeming | Massa Ong. | De Dimensies van de grens | De basis Classificatie van de Lading | Het beperken Snelheid |
Huidig | De Code van Oreginal | Fw | D | C | Dynamisch Cr | Cor Statisch | Olie |
mm | g | mm | N | t/min |
45 | BK4512 | 25941/45 | 45 | 45 | 52 | 12 | 12900 | 22500 | 5800 |
HK4516 | 47941/45 | 46.2 | 45 | 52 | 16 | 19300 | 3800 | 5800 |
BK4516 | 45941/45 | 56 | 45 | 52 | 16 | 19300 | 38000 | 5800 |
HK4520 | 67941/45 | 56 | 45 | 52 | 20 | 22000 | 51000 | 5800 |
BK4520 | 65941/45 | 72 | 45 | 52 | 20 | 22000 | 51000 | 5800 |
HK45*55*38 | 7943/45 | 135 | 45 | 52 | 38 | 27600 | 61000 | 5300 |
50 | HK50*57*16 | | 51.2 | 50 | 57 | 16 | 15200 | 32500 | 5300 |
HK5012 | 27941/50 | 44.2 | 50 | 58 | 12 | 23600 | 57200 | 5300 |
HK5020 | 57941/50 | 72 | 50 | 58 | 20 | 28000 | 60000 | 5300 |
BK5020 | 55941/50 | 87.3 | 50 | 58 | 20 | 28000 | 60000 | 5300 |
HK5025 | 7943/50 | 90.1 | 50 | 58 | 25 | 34500 | 80000 | 5300 |
BK5025 | 5943/50 | 109 | 50 | 58 | 25 | 34500 | 80000 | 5300 |
HK50*60*38 | | 140 | 50 | 60 | 38 | 27770 | 63100 | 4600 |
55 | HK5520 | 57941/255 | 78 | 55 | 63 | 20 | 29500 | 59900 | 4600 |
BK5520 | 55941/55 | 93.8 | 55 | 63 | 20 | 29500 | 59900 | 4600 |
HK5525 | 77941/55 | 109 | 55 | 63 | 25 | 33200 | 69980 | 4600 |
HK5528 | 87941/55 | 111 | 55 | 63 | 28 | 39090 | 98000 | 4600 |
BK5528 | 85941/55 | 132 | 55 | 63 | 28 | 39090 | 98000 | 4600 |
60 | HK6012 | | 19.2 | 60 | 68 | 12 | 12400 | 29000 | 4100 |
BK6012 | | 77 | 60 | 68 | 12 | 12400 | 29000 | 4100 |
HK6020 | 57941/60 | 86 | 60 | 68 | 20 | 30500 | 72000 | 4100 |
HK6020 | 55941/60 | 105 | 60 | 68 | 20 | 30500 | 72000 | 4100 |
HK6032 | 87941/60 | 136 | 60 | 68 | 32 | 50000 | 131000 | 4100 |
BK6032 | 85941/60 | 164 | 60 | 68 | 32 | 50000 | 131000 | 4100 |
Schacht Diameter | Dragende Benoeming | Massa Ong. | De Dimensies van de grens | De basis Classificatie van de Lading | Het beperken Snelheid |
Huidig | Fw | D | C | Dynamisch Cr | Cor Statisch | Olie |
mm | g | mm | N | t/min |
8 | HK0810 RS | 2.9 | 8 | 12 | 10 | 2250 | 2100 | 19000 |
HK0812 2RS | 3.5 | 8 | 12 | 12 | 2250 | 2100 | 19000 |
9 | HK09*13*12 RS | 4 | 9 | 13 | 12 | 3800 | 4300 | 19000 |
10 | HK1012 RS | 4.2 | 10 | 14 | 12 | 4100 | 5000 | 19000 |
HK1014 RS | 5.2 | 10 | 14 | 14 | 4100 | 5000 | 15000 |
12 | HK1214 RS | 10.7 | 12 | 18 | 14 | 6100 | 7000 | 15000 |
HK1216 RS | 11.5 | 12 | 18 | 16 | 6100 | 7000 | 12000 |
13 | HK13*19*12 RS | 8.9 | 13 | 19 | 12 | 6800 | 7580 | 12000 |
14 | HK1414 RS | 12 | 14 | 20 | 14 | 6100 | 7500 | 13000 |
HK1416 RS | 14 | 14 | 20 | 16 | 6100 | 7500 | 11000 |
BK1414 RS | 14.1 | 14 | 20 | 14 | 6100 | 7500 | 11000 |
15 | HK1514 RS | 12.6 | 15 | 21 | 14 | 6800 | 8800 | 11000 |
HK1516 RS | 14.3 | 15 | 21 | 16 | 6800 | 8800 | 10000 |
BK1514 RS | 14.4 | 15 | 21 | 14 | 6800 | 8800 | 10000 |
HK1518 RS | 16 | 15 | 21 | 18 | 9500 | 11400 | 10000 |
HK1520 RS | 18 | 15 | 21 | 20 | 9500 | 11400 | 10000 |
16 | HK1614 RS | 15.1 | 16 | 22 | 14 | 7200 | 9200 | 10000 |
HK1616 RS | 15.1 | 16 | 22 | 16 | 7200 | 9200 | 10000 |
BK1614 RS | 15.3 | 16 | 22 | 14 | 7200 | 9200 | 10000 |
HK1620 RS | 16.8 | 16 | 22 | 20 | 9900 | 12300 | 10000 |
HK1625 RS | | 16 | 22 | 25 | 9900 | 12300 | 10000 |
17 | HK17*25*14RS | 17.7 | 17 | 25 | 14 | 8000 | 9800 | 10000 |
HK17*25*115.5RS | 20 | 17 | 25 | 15.5 | 9320 | 10400 | 13000 |
HK17*25*18 RS | 23.5 | 17 | 25 | 18 | 10500 | 12600 | 13000 |
HK17*25*20 RS | 26.2 | 17 | 25 | 20 | 11600 | 13200 | 13000 |
18 | HK1814 RS | 15.1 | 18 | 24 | 14 | 7800 | 9900 | 13000 |
HK1816 2RS | 17 | 18 | 24 | 16 | 7800 | 9900 | 9200 |
20 | HK2012 RS | 11.7 | 20 | 26 | 12 | 9500 | 11900 | 9200 |
HK2016 2RS | 18.8 | 20 | 26 | 16 | 8000 | 10100 | 9000 |
HK2018 RS | 21.4 | 20 | 26 | 18 | 12700 | 20100 | 8200 |
HK2020 2RS | 23.5 | 20 | 26 | 20 | 12700 | 20100 | 7800 |
BK2018 RS | 24.4 | 20 | 26 | 18 | 12700 | 20100 | 7800 |
HK20*29*18RS | 28.8 | 20 | 29 | 18 | 8700 | 9980 | 7800 |
22 | HK2212 RS | 14 | 22 | 28 | 12 | 8310 | 10000 | 9000 |
HK2214 RS | 18.3 | 22 | 28 | 14 | 9000 | 12400 | 7800 |
HK22162 RS | 20.3 | 22 | 218 | 16 | 9000 | 12400 | 7800 |
HK2218 RS | 23.5 | 22 | 28 | 18 | 10400 | 20100 | 7800 |
HK2220 2RS | 25.5 | 22 | 28 | 20 | 10400 | 20100 | 7800 |
25 | HK2516 2RS | 27.3 | 25 | 32 | 16 | 9800 | 13200 | 6900 |
HK2518 RS | 31 | 25 | 32 | 18 | 13600 | 20000 | 6900 |
Schacht Diameter | Dragende Benoeming | Massa Ong. | De Dimensies van de grens | De basis Classificatie van de Lading | Het beperken Snelheid |
Huidig | Fw | D | C | Dynamisch Cr | Cor Statisch | Olie |
mm | g | mm | N | t/min |
25 | HK2520 2RS | 33.1 | 25 | 32 | 20 | 13600 | 20000 | 6900 |
BK2518 RS | 35.3 | 25 | 32 | 18 | 13600 | 20000 | 6900 |
HK2524 2RS | 39.7 | 25 | 32 | 24 | 17900 | 30000 | 6900 |
HK2530 2RS | 47.3 | 2528 | 32 | 30 | 24500 | 43000 | 6900 |
28 | HK2820 2RS | 36.9 | 30 | 35 | 20 | 11400 | 22500 | 5300 |
30 | HK3016 2RS | 28.5 | 30 | 37 | 16 | 10100 | 16200 | 5300 |
HK3018 RS | 36.6 | 30 | 37 | 18 | 16200 | 26000 | 5300 |
HK30202RS | 39.1 | 30 | 37 | 20 | 16200 | 26000 | 5300 |
HK3024 2RS | 49.7 | 30 | 37 | 24 | 21000 | 38500 | 5300 |
35 | HK3516 2RS | 36.4 | 35 | 42 | 16 | 10100 | 20300 | 4900 |
HK3518 RS | 37.4 | 35 | 42 | 18 | 16700 | 30500 | 4900 |
HK3520 2RS | 41.1 | 35 | 42 | 20 | 16700 | 30500 | 4900 |
40 | HK4016 2RS | 41.2 | 40 | 47 | 16 | 11000 | 21300 | 4200 |
HK4018 RS | 47.3 | 40 | 47 | 18 | 19000 | 30500 | 4200 |
HK4020 2RS | 50.2 | 40 | 47 | 20 | 19000 | 30500 | 4200 |
45 | HK4518 RS | 54.2 | 45 | 52 | 18 | 20300 | 41000 | 3800 |
HK4520 2RS | 57.4 | 45 | 52 | 20 | 20300 | 41000 | 3800 |
50 | HK5022 RS | 77.2 | 50 | 58 | 24 | 30000 | 61000 | 3200 |
HK5024 2RS | 84 | 50 | 58 | 24 | 30000 | 61000 | 3200 |
De Diameter van de schacht | Dragende Benoeming | Massa Ong. | De basis Classificatie van de Lading |
Cr Dynamisch | Cor Statisch |
mm | g | N |
zonder het binnen lring |
15 | RPNA 15/28 | 32 | 4660 | 5700 |
18 | RPNA 18/32 | 52 | 9800 | 14000 |
20 | RPNA 20/35 | 62 | 10500 | 15500 |
25 | RPNA 25/42 | 109 | 14900 | 27800 |
28 | RPNA 28/44 | 112 | 20500 | 31900 |
30 | RPNA 30/47 | 125 | 20980 | 33500 |
35 | RPNA 35/52 | 131 | 21500 | 39600 |
40 | RPNA 40/55 | 141 | 24000 | 44700 |
45 | RPNA 45/62 | 176 | 24800 | 50900 |
met het binnen lring |
12 | PNA 12/28 | 37 | 4660 | 5700 |
15 | PNA 15/32 | 62 | 9800 | 14000 |
17 | PNA 17/35 | 73 | 10500 | 15500 |
20 | PNA 20/42 | 136 | 14900 | 27800 |
22 | PNA 22/44 | 145 | 20500 | 31900 |
25 | PNA 25/47 | 157 | 20980 | 33500 |
30 | PNA 30/52 | 181 | 21500 | 39600 |
35 | PNA 35/55 | 177 | 24000 | 44700 |
40 | PNA 40/62 | 227 | 24800 | 50900 |
| | | | | | |
BCH57 | 5/16 | 7.938 | 0.563 | 14.288 | 0.437 | 11.112 |
BCH68 | 3/8 | 9.525 | 0.625 | 15.875 | 0.5 | 12.7 |
BCH78 | 3/8 | 11.112 | 0.688 | 17.462 | 0.5 | 12.7 |
BCH87 | 1/2 | 12.7 | 0.75 | 19.05 | 0.438 | 11.112 |
BCH88 | 1/2 | 12.7 | 0.75 | 19.05 | 0.5 | 12.7 |
BCH810 | 1/2 | 12.7 | 0.75 | 19.05 | 0.625 | 15.875 |
BCH812 | 1/2 | 12.7 | 0.75 | 19.05 | 0.75 | 19.05 |
BCH98 | 9/16 | 14.288 | 0.813 | 20.638 | 0.5 | 12.7 |
BCH910 | 9/16 | 14.288 | 0.813 | 20.638 | 0.625 | 15.875 |
BCH912 | 9/16 | 14.288 | 0.813 | 20.638 | 0.75 | 19.05 |
BCH108 | 5/8 | 15.875 | 0.875 | 22.225 | 0.5 | 12.7 |
BCH1010 | 5/8 | 15.875 | 0.875 | 22.225 | 0.625 | 15.875 |
BCH1012 | 5/8 | 15.875 | 0.875 | 22.225 | 0.75 | 19.05 |
BCH1016 | 5/8 | 15.875 | 0.875 | 22.225 | 1 | 25.4 |
BCH117 | 11/16 | 17.462 | 0.938 | 23.812 | 0.437 | 11.112 |
BCH1110 | 11/16 | 17.462 | 0.938 | 23.812 | 0.625 | 15.875 |
BCH1112 | 11/16 | 17.462 | 0.938 | 23.812 | 0.75 | 19.05 |
BCH1212 | 3/4 | 19.05 | 1.063 | 26.988 | 0.75 | 19.05 |
BCH1310 | 13/16 | 20.638 | 1.125 | 28.575 | 0.625 | 15.875 |
BCH1312 | 13/16 | 20.638 | 1.125 | 28.575 | 0.75 | 19.05 |
| | | | | | |
BCH1412 | 7/8 | 22.225 | 1.188 | 30.162 | 0.75 | 19.05 |
BCH1416 | 7/8 | 22.225 | 1.188 | 30.162 | 1 | 25.4 |
BCH1610 | 1 | 25.4 | 1.313 | 33.338 | 0.625 | 15.875 |
BCH1612 | 1 | 25.4 | 1.313 | 33.338 | 0.75 | 19.05 |
BCH1616 | 1 | 25.4 | 1.313 | 33.338 | 1 | 25.4 |
BCH1810 | 1 1/8 | 28.575 | 1.5 | 38.1 | 0.625 | 15.875 |
BCH1812 | 1 1/8 | 28.575 | 1.5 | 38.1 | 0.75 | 19.05 |
BCH1816 | 1 1/8 | 28.575 | 1.5 | 38.1 | 1 | 25.4 |
BCH1818 | 1 1/8 | 28.575 | 1.5 | 38.1 | 1.125 | 28.575 |
BCH1820 | 1 1/8 | 28.575 | 1.5 | 38.1 | 1.25 | 31.75 |
BCH208 | 1 1/4 | 31.75 | 1.625 | 41.275 | 0.5 | 12.7 |
BCH2012 | 1 1/4 | 31.75 | 1.625 | 41.275 | 0.75 | 19.05 |
BCH2016 | 1 1/4 | 31.75 | 1.625 | 41.275 | 1 | 25.4 |
BCH2020 | 1 1/4 | 31.75 | 1.625 | 41.275 | 1.25 | 31.75 |
BCH2216 | 1 3/8 | 34.925 | 1.75 | 44.45 | 1 | 25.4 |
15.875 | SCE108 | BCE108 | 15.875 | 20.638 | 12.7 | 8743 | 12015 | 16000 | |
SCE1010 | BCE1010 | 15.875 | 20.638 | 15.88 | 10368 | 16242 | 16000 | |
SCE1012 | BCE1012 | 15.875 | 20.638 | 19.05 | 12015 | 19802 | 16000 | |
17.462 | SCE116 | BCE116 | 17.462 | 22.225 | 9.52 | 5740 | 7876 | 15000 | |
19.05 | SCE1210 | BCE1210 | 19.05 | 25.4 | 15.88 | 12682 | 17577 | 13000 | |
SCE1212 | BCE1212 | 19.05 | 25.4 | 19.05 | 15352 | 22250 | 13000 | |
20.638 | SCE1312 | BCE1312 | 20.638 | 26.988 | 19.05 | 16020 | 23585 | 12000 | |
22.225 | SCE148 | BCE148 | 22.225 | 28.575 | 12.7 | 11125 | 15797 | 11000 | |
SCE1412 | BCE1412 | 22.225 | 28.575 | 19.05 | 16910 | 27145 | 11000 | |
23.812 | SCE1516 | BCE1516 | 23.812 | 30.162 | 25.4 | 24030 | 43165 | 11000 | |
25.4 | SCE168 | BCE168 | 25.4 | 31.75 | 12.7 | 12682 | 19135 | 10000 | |
SCE1612 | BCE1612 | 25.4 | 31.75 | 19.05 | 18022 | 30260 | 10000 | |
SCE1616 | BCE1616 | 25.4 | 31.75 | 25.4 | 24920 | 45390 | 10000 | |
28.575 | SCE188 | BCE188 | 28.575 | 34.925 | 12.7 | 12905 | 20247 | 9000 | |
SCE1812 | BCE1812 | 28.575 | 34.925 | 19.05 | 18912 | 33375 | 9000 | |
SCE1816 | BCE1816 | 28.575 | 34.925 | 25.4 | 25810 | 49395 | 9000 | |
31.75 | SCE2012 | BCE2012 | 31.75 | 38.1 | 19.05 | 21137 | 39605 | 8000 | |
SCE2016 | BCE2016 | 31.75 | 38.1 | 25.4 | 27145 | 54735 | 8000 | |
34.925 | SCE2212 | BCE2212 | 34.925 | 41.275 | 19.05 | 21360 | 42720 | 7500 | |
SCE2216 | BCE2216 | 34.925 | 41.275 | 25.4 | 27590 | 59185 | 7500 | |
38.1 | SCE2416 | BCE2416 | 38.1 | 47.625 | 25.4 | 38715 | 66305 | 6500 | |
40.45 | SCE2816 | BCE2816 | 44.45 | 53.975 | 25.4 | 41385 | 75650 | 6000 | |
50.8 | SCE3220 | BCE3220 | 50.8 | 60.325 | 31.75 | 55180 | 115700 | 5000 |
Schacht Dia. | Het Aantal van het deel | Fw | D | C |
mm | Open Eind | Gesloten Eind | Afmeting (mm) |
8 | FH 0810 | MFH 0810 | 8 | 14 | 10 |
9 | FH 0910 | MFH 0910 | 9 | 15 | 10 |
10 | F 1010 | MF 1010 | 10 | 14 | 10 |
FH 1010 | MFH 1010 | 10 | 16 | 10 |
12 | F 1210 | MF 1210 | 12 | 16 | 10 |
F 1212 | MF 1212 | 12 | 16 | 12 |
FH 1212 | MFH 1212 | 12 | 18 | 12 |
13 | F 1312 | MF 1312 | 13 | 19 | 12 |
14 | F 1412 | MF 1412 | 14 | 20 | 12 |
F 1413 | MF 1413 | 14 | 20 | 13 |
F 1416 | MF 1416 | 14 | 20 | 16 |
15 | F 1510 | MF 1510 | 15 | 21 | 10 |
F 1512 | MF 1512 | 15 | 21 | 12 |
F 1514 | MF 1514 | 15 | 21 | 14 |
F 1516 | MF 1516 | 15 | 21 | 16 |
16 | F 1612 | MF 1612 | 16 | 22 | 12 |
F 1616 | MF 1616 | 16 | 22 | 16 |
17 | F 1712 | MF 1712 | 17 | 23 | 12 |
F 1716 | MF 1716 | 17 | 23 | 16 |
F 1720 | MF 1720 | 17 | 23 | 20 |
18 | F 1812 | MF 1812 | 18 | 24 | 12 |
F 1816 | MF 1816 | 18 | 24 | 16 |
20 | F 2012 | MF 2012 | 20 | 26 | 12 |
F 2016 | MF 2016 | 20 | 26 | 16 |
F 2020 | MF 2020 | 20 | 26 | 20 |
22 | F 2210 | MF 2210 | 22 | 28 | 10 |
F 2212 | MF 2212 | 22 | 28 | 12 |
F 2216 | MF 2216 | 22 | 28 | 16 |
F 2220 | MF 2220 | 22 | 28 | 20 |
De Reeks van ba
Schacht Diameter | Dragende Benoeming | Massa Ong. | De Dimensies van de grens | De Classificatie van Basi cLoad | Het beperken van Snelheid |
Huidige Code | Originele Code | Fw | D | C | Dynamisch | Statisch | Olie |
mm | g | mm | N | t/min |
| | | | | | | | | |
6.35 | Ba 44ZOH | 2.1 | 6.35 | 11.112 | 6.35 | 150 | 110 | 55000 |
Ba 47ZOH | 3.5 | 6.35 | 11.112 | 11.13 | 270 | 240 | 55000 |
7.938 | Ba 55ZOH | 3 | 7.938 | 12.7 | 7.92 | 190 | 160 | 45000 |
Ba 57ZOH | 4.3 | 7.938 | 12.7 | 11.13 | 340 | 330 | 45000 |
9.525 | Ba 66 | 4.2 | 9.525 | 14.288 | 9.525 | 320 | 310 | 40000 |
Ba 66ZOH | 4.2 | 9.525 | 14.288 | 9.52 | 320 | 310 | 40000 |
Ba 68 | 5.7 | 9.525 | 14.288 | 12.7 | 430 | 470 | 40000 |
Ba 610Z | 7 | 9.525 | 14.288 | 15.88 | 580 | 680 | 40000 |
12.7 | Ba 88ZOH | 7.2 | 12.7 | 17.462 | 12.7 | 480 | 580 | 30000 |
Ba 810 | 8.9 | 12.7 | 17.462 | 15.88 | 650 | 850 | 30000 |
Ba 810ZOH | 8.9 | 12.7 | 17.462 | 15.88 | 650 | 850 | 30000 |
Ba 812ZOH | 10.6 | 12.7 | 17.462 | 19.05 | 800 | 1120 | 30000 |
14.288 | Ba 910ZOH | 9.9 | 14.288 | 19.05 | 15.88 | 720 | 1010 | 30000 |
15.875 | Ba 105Z | 5.3 | 15.875 | 20.638 | 7.94 | 290 | 330 | 25000 |
Ba 107ZOH | 7.6 | 15.875 | 20.638 | 11.11 | 510 | 680 | 25000 |
Ba 108ZOH | 8.7 | 15.875 | 20.638 | 12.7 | 550 | 740 | 25000 |
Ba 1010ZOH | 10.8 | 15.875 | 20.638 | 15.88 | 750 | 1100 | 25000 |
Ba 1012Z | 12.9 | 15.875 | 20.638 | 19.05 | 920 | 1430 | 25000 |
17.462 | Ba 118ZX | 9.5 | 17.462 | 22.225 | 12.7 | 630 | 900 | 25000 |
19.05 | Ba 126ZOH | 10 | 19.05 | 25.4 | 9.52 | 510 | 600 | 20000 |
Ba 128 | 13.5 | 19.05 | 25.4 | 12.7 | 700 | 890 | 20000 |
Ba l28ZOH | 13.5 | 19.05 | 25.4 | 12.7 | 700 | 890 | 20000 |
Ba 1210 | 17 | 19.05 | 25.4 | 15.88 | 970 | 1350 | 20000 |
Ba 1210ZOH | 17 | 19.05 | 25.4 | 15.88 | 970 | 1350 | 20000 |
Ba 1212ZOH | 20.5 | 19.05 | 25.4 | 19.05 | 1220 | 1800 | 20000 |
22.225 | Ba 146ZOH | 11.5 | 22.225 | 28.575 | 9.52 | 550 | 690 | 18000 |
Ba 148ZOH | 15.6 | 22.225 | 28.575 | 12.7 | 760 | 1080 | 18000 |
Ba 1412ZOH | 23.5 | 22.225 | 28.575 | 19.05 | 1310 | 2080 | 18000 |
Ba 1416ZOH | 31 | 22.225 | 28.575 | 25.4 | 1790 | 3110 | 18000 |
25.4 | Ba 1612 | 26.5 | 25.4 | 31.75 | 19.05 | 1450 | 2470 | 15000 |
Ba 1612ZOH | 26.5 | 25.4 | 31.75 | 19.05 | 1450 | 2470 | 15000 |
Ba 1616 | 35.5 | 25.4 | 31.75 | 25.4 | 1980 | 3700 | 15000 |
Ba 1616ZOH | 35.5 | 25.4 | 31.75 | 25.4 | 1980 | 3700 | 15000 |
28.575 | Ba 188 | 19.5 | 28.575 | 34.925 | 12.7 | 880 | 1360 | 13000 |
Ba 1816Z | 39 | 28.575 | 34.925 | 25.4 | 2090 | 4110 | 13000 |
Ba 1816 | 39 | 28.575 | 34.925 | 25.4 | 2090 | 4110 | 13000 |
Schacht Diameter | Dragende Benoeming | Massa
Ong. | BoundaryDimensions | BasicLoadRating | Het beperken van Snelheid |
CurrentCode | OriginalCode | Fw | D | C | Dynamisch | Statisch | Olie |
mm | g | mm | N | t/min |
4.76 | J-35 | | | 4.76 | 8.73 | 9.525 | 257 | 352 | 75000 |
6.35 | J-45 | | | 6.35 | 11.11 | 7.92 | 290 | 331 | 57000 |
J-47 | | | 6.35 | 11.11 | 11.13 | 473 | 617 | 57000 |
7.94 | J-55 | | | 7.94 | 12.7 | 7.92 | 315 | 383 | 44000 |
J-57 | | | 7.94 | 12.7 | 11.13 | 560 | 805 | 44000 |
Jh-57 | | | 7.94 | 14.29 | 11.13 | 696 | 849 | 47000 |
9.525 | J-65 | | | 9.525 | 14.29 | 7.92 | 358 | 474 | 36000 |
J-66 | | | 9.525 | 14.29 | 9.52 | 500 | 728 | 36000 |
J-68 | | | 9.525 | 14.29 | 12.7 | 755 | 1240 | 36000 |
Jh-68 | | | 9.525 | 15.88 | 12.7 | 987 | 1370 | 38000 |
11.11 | J-78 | | | 11.11 | 15.88 | 12.7 | 882 | 1580 | 30000 |
Jh-78 | | | 11.11 | 17.46 | 12.7 | 1060 | 1510 | 30000 |
12.548 | J-88K | | | 12.548 | 17.463 | 12.7 | 914 | 1710 | 26000 |
14.288 | J-910 | | | 14.288 | 19.05 | 15.88 | 1190 | 2490 | 23000 |
J-108 | | | 15.88 | 20.64 | 1 2.7 | 970 | 1970 | 21000 |
15.88 | Jh-1010 | | | 15.88 | 22.225 | 15.88 | 1280 | 2930 | 21000 |
17.462 | Jh-1112 | | | 17.462 | 23.812 | 19.05 | 1830 | 4610 | 19000 |
19.05 | J-1212 | | | 19.05 | 25.4 | 19.05 | 2320 | 4880 | 18000 |
22.225 | J-148 | | | 22.225 | 28.58 | 12.7 | 1640 | 3270 | 15000 |
Jh-1412 | | | 22.225 | 30.16 | 19.05 | 2710 | 5450 | 15000 |
Jh-14160H | | | 22.225 | 30.162 | 25.4 | 2710 | 5450 | 15000 |
25.4 | Jh-1616 | | | 25.4 | 33.34 | 25.4 | 4090 | 9570 | 13000 |
28.58 | Jh-1818 | | | 28.58 | 38.1 | 28.58 | 5440 | 12500 | 12000 |
35.61 | Jh-1470 | | | 35.61 | 57.2 | 17.8 | 5680 | 13500 | 10000 |
41.275 | J-2616 | | | 41.275 | 50.8 | 25.4 | 5890 | 15600 | 7900 |
50.8 | J-3216 | | | 50.8 | 60.32 | 25.4 | 6350 | 18400 | 6300 |
C&H | Afmetingen (mm) | N.W. | C&H | Afmetingen (mm) | N.W. |
F | D | B | ≈g | F | D | B | ≈g |
F-0608 | 6 | 10 | 8 | 2.5 | F-1718 | 17 | 23 | 18 | 21 |
SN55 | 7.938 | 12.7 | 7.938 | | SN116 | 17.462 | 22.225 | 9.525 | |
SN56 | 7.938 | 12.7 | 9.525 | | F-1816 | 18 | 24 | 16 | 18 |
SN57 | 7.938 | 12.7 | 11.113 | 5 | SN128 | 19.05 | 25.4 | 12.7 | |
F-0810 | 8 | 12 | 10 | 3.7 | FY-19.05Xx34.13x6.35 | 19.05 | 34.131 | 6.35 | 21.66 |
Fh-0810 | 8 | 14 | 10 | 7 | F-2012 | 20 | 26 | 12 | 18 |
Fh-0812 | 8 | 14 | 12 | 9 | Mf-2012 | 20 | 26 | 12 | 16.7 |
F-0910 | 9 | 13 | 10 | 4 | F-2014 | 20 | 26 | 14 | 17 |
Fh-0910 | 9 | 15 | 10 | 6 | F-2020 | 20 | 26 | 20 | 26 |
FH-9x15x13 | 9 | 15 | 13 | 8 | F-20x26x25 | 20 | 26 | 25 | 33 |
SN65 | 9.525 | 14.288 | 7.938 | 4.41 | FY-20x28x20 | 20 | 28 | 20 | 37.45 |
SN66 | 9.525 | 14.288 | 9.525 | 5.85 | FY-21x35x27 | 21 | 35 | 27 | 103.8 |
SN68 | 9.525 | 14.288 | 12.7 | 7.5 | SN148 | 22.225 | 28.575 | 12.7 | |
F-1010 | 10 | 14 | 10 | 4.2 | F-2516 | 25 | 32 | 16 | 28 |
Fh-1010 | 10 | 16 | 10 | 6.5 | F-2522 | 25 | 32 | 22 | 40 |
F10×16×15 | 10 | 16 | 15 | 12 | F-25x32x25 | 25 | 32 | 25 | 43 |
MF10x15x9.5 | 10 | 15 | 9.5 | 6.7 | F-25x33x8 | 25 | 33 | 8 | 16.7 |
FY-10x16x09 | 10 | 16 | 9 | 6.796 | FY-25x33x16 | 25 | 33 | 16 | 35.7 |
MFY-10x16.02x9.5 | 10 | 16.02 | 9.5 | 7.845 | Fy-26325 | 26 | 32 | 5.3 | 9.4 |
SN76 | 11.112 | 15.875 | 9.525 | | SN1816 | 28.575 | 34.925 | 25.4 | |
SN78 | 11.112 | 15.875 | 12.7 | | F-2820 | 28 | 35 | 20 | 118 |
F-1212 | 12 | 16 | 12 | 6 | F-3020 | 30 | 37 | 20 | 42 |
F-12x17x12 | 12 | 17 | 12 | 8 | F-30x38x16 | 30 | 38 | 16 | 37.5 |
F-12x17x15 | 12 | 17 | 15 | 10.5 | F-30x38x24 | 30 | 38 | 24 | 59.2 |
F-12x17x18 | 12 | 17 | 18 | 13 | F-30x38x25 | 30 | 38 | 25 | 61.2 |
SN88 | 12.7 | 17.462 | 12.7 | | FY-30x38x25 | 30 | 38 | 25 | 68.95 |
SN810 | 12.7 | 17.462 | 15.875 | | F-30x38x32 | 30 | 38 | 32 | 81.5 |
SN812 | 12.7 | 17.462 | 19.05 | | F-30x40x25 | 30 | 40 | 25 | 81.9 |
MFY-13x19x12 | 13 | 19 | 12 | 12 | Y-2012 | 31.75 | 38.1 | 19.05 | 41 |
F-1413 | 14 | 20 | 13 | 12 | F-3216 | 32 | 39 | 16 | 35 |
MFY-14x22x13 | 14 | 22 | 13 | 18.358 | F-3520 | 35 | 42 | 20 | 49 |
FY-15x20x07 | 15 | 20 | 7 | 6.06 | F-35x43x16 | 35 | 43 | 16 | 41 |
F-15x20x12 | 15 | 20 | 12 | 10 | F-35x43x25 | 35 | 43 | 25 | 72 |
F-15x20x16 | 15 | 20 | 16 | 13.5 | F-35x43x32 | 35 | 43 | 32 | 90 |
F-15x20x20 | 15 | 20 | 20 | 17.2 | F-4020 | 40 | 47 | 20 | 56 |
FY-15x20x20 | 15 | 20 | 20 | 20 | Fh-4032 | 40 | 50 | 32 | 88 |
F-1512 | 15 | 21 | 12 | 12 | FH-40x50x38 | 40 | 50 | 38 | 105 |
FY-15.5x20x18 | 15.5 | 20 | 18 | 20.7 | F-4520 | 45 | 52 | 20 | 62 |
SN105 | 15.875 | 20.638 | 7.938 | | FH-45x55x38 | 45 | 55 | 38 | 140 |
F-1616 | 16 | 22 | 16 | 17 | F-5020 | 50 | 58 | 20 | 78 |
F-1712 | 17 | 23 | 12 | 13 | FH-50x60x38 | 50 | 60 | 38 | 145 |
F-1714 | 17 | 23 | 14 | 15 | F-60x68x40 | 60 | 68 | 40 | 185 |
De diameter van de schacht | Het dragen van type | Afmetingen | Fundamentele geschatte lading | De snelheid van de grens |
huidig | origineel | FW | D | C | dynamisch | statisch | De snelheid van de olie |
| |
C | Co |
mm | mm | N | t/min |
3.175 | F3.175X6.35X6.35 | B-24 | 3.175 | 6.35 | 6.35 | 3200 | 5900 | 19000 |
4.762 | F4.762X8.731X6.35 | B-34 | 4.762 | 8.731 | 6.35 | 3400 | 6000 | 19000 |
6.35 | F6.35X11.11X11.13 | B-47 | 6.35 | 11.11 | 11.13 | 3500 | 6050 | 12000 |
MF6.35X11.11X11.13 | M-471 | 6.35 | 11.11 | 11.13 | 3500 | 6050 | 12000 |
8 | F-0810 | 50941/8 | 8 | 12 | 10 | 4050 | 7150 | 13000 |
Fh-0810 | 941/8 | 8 | 14 | 10 | 5200 | 7150 | 7400 |
Fh-0812 | 942/8 | 8 | 14 | 12 | 4550 | 7150 | 7400 |
9 | FH0910 | 50941/9 | 9 | 13 | 10 | 4900 | 8050 | 12000 |
FH0910 | 941/9 | 9 | 15 | 10 | 8000 | 11500 | 7100 |
FH9X15X13 | 942/9 | 9 | 15 | 13 | 8560 | 12800 | 7100 |
9.52 | F9.52X14.29X12.7 | B-68 | 9.52 | 14.29 | 12.7 | 9000 | 13300 | 7100 |
10 | F-1010 | 50941/10 | 10 | 14 | 10 | 5700 | 9350 | 11000 |
Fh-1010 | 941/10 | 10 | 16 | 10 | 6350 | 10800 | 11000 |
F10X16X15 | 942/10 | 10 | 16 | 15 | 6890 | 11500 | 7100 |
| 943/10 | 10 | 16 | 17 | 6500 | 11000 | 7000 |
12 | F-1212 | 60941/12 | 12 | 16 | 12 | 6380 | 10900 | 7100 |
F12X17X12 | 941/12 | 12 | 17 | 12 | 8400 | 11900 | 7100 |
F12X17X15 | 942/12 | 12 | 17 | 15 | 9000 | 12500 | 7100 |
F12X17X18 | 943/12 | 12 | 17 | 18 | 9800 | 13500 | 7100 |
15 | F15X20X12 | 941/15 | 15 | 20 | 12 | 8400 | 11900 | 7100 |
F15X20X16 | 942/15 | 15 | 20 | 16 | 9500 | 12800 | 7100 |
F15X20X20 | 943/15 | 15 | 20 | 20 | 10500 | 16000 | 7100 |
FY15X20X20 | Y152020 | 15 | 20 | 20 | 10500 | 16000 | 7100 |
F-1512 | 30941/15 | 15 | 21 | 12 | 9700 | 15900 | 8100 |
16 | F-1616 | 50941/16 | 16 | 22 | 16 | 14100 | 25900 | 7700 |
17 | F-1712 | 30941/17 | 17 | 23 | 12 | 10600 | 21600 | 7300 |
F-1714 | 941/17 | 17 | 23 | 14 | 12500 | 22500 | 7300 |
F-1718 | 942/17 | 17 | 23 | 18 | 13800 | 24800 | 7300 |
| 943/17 | 17 | 23 | 22 | 13500 | 24000 | 7100 |
18 | F1816 | 50941/18 | 18 | 24 | 16 | 15000 | 29100 | 6900 |
20 | F-2014 | 941/20 | 20 | 26 | 14 | 15800 | 40500 | 6900 |
F-2020 | 942/20 | 20 | 26 | 20 | 18800 | 42500 | 6900 |
F20X26X25 | 943/20 | 20 | 26 | 25 | 20500 | 35500 | 6300 |
25 | F-2516 | 941/25 | 25 | 32 | 16 | 18700 | 37900 | 5100 |
F-2522 | 942/25 | 25 | 32 | 22 | 11000 | 16500 | 5100 |
F25X32X25 | 943/25 | 25 | 32 | 25 | 11500 | 18500 | 5100 |
F25X33X08 | Y253308 | 25 | 33 | 8 | 12200 | 16800 | 4300 |
28 | F-2820 | 60941/28 | 28 | 35 | 20 | 25700 | 58300 | 4600 |
30 | F-3020 | 60941/30 | 30 | 37 | 20 | 26800 | 62500 | 4300 |
30 | Mf-3020 | 65941/30 | 30 | 37 | 20 | 26800 | 62500 | 4300 |
F30X38X16 | 941/30 | 30 | 38 | 16 | 25500 | 57500 | 4600 |
F30X38X24 | 942/30 | 30 | 38 | 24 | 28800 | 64500 | 4300 |
F30X38X32 | 943/30 | 30 | 38 | 32 | 34500 | 78900 | 4300 |
32 | F-3216 | 40941/32 | 32 | 39 | 16 | 25800 | 61500 | 4300 |
35 | F3520 | 60941/35 | 35 | 42 | 20 | 24000 | 69100 | 3700 |
F35X43X16 | 941/35 | 35 | 43 | 16 | 23500 | 68000 | 3700 |
F35X43X25 | 942/35 | 35 | 43 | 25 | 38700 | 86200 | 3200 |
F35X43X32 | 943/35 | 35 | 43 | 32 | 40500 | 97800 | 3200 |
40 | F-4020 | 60941/40 | 40 | 47 | 20 | 30300 | 82600 | 3300 |
FH4032 | 942/40 | 40 | 50 | 32 | 42500 | 108000 | 2600 |
Mfh-4032 | 86942/40 | 40 | 50 | 32 | 42500 | 108000 | 2600 |
FH40X50X38 | 943/40 | 40 | 50 | 38 | 44800 | 118500 | 2600 |
45 | F-4520 | | 45 | 52 | 20 | 30400 | 90100 | 2900 |
FH45X55X38 | 943/45 | 45 | 55 | 38 | 45800 | 128000 | 2900 |
50 | F-5020 | 50941/50 | 50 | 58 | 20 | 35800 | 98000 | 2600 |
FH50X60X38 | 943/50 | 50 | 60 | 38 | 50500 | 145800 | 2600 |
60 | F60X68X40 | 943/60 | 60 | 6 | 40 | 50200 | 145000 | 2600 |
Adres:
Changhong West Road 182, Wujin District, Changzhou, Jiangsu, China
Soort bedrijf:
Fabrikant/fabriek
Zakelijk Bereik:
Auto Parts, Ijzerwaren & Gereedschap, Industriële Apparaturen & Onderdelen, Metallurgische, Mineralen & Energie, Produceren & Verwerken Machine
Certificering Van Managementsysteem:
ISO 9001
Bedrijfsintroductie:
Changzhou Lisongtai Industrial Motion Technology Co., Ltd, is een fabrikant gespecialiseerd in het produceren van diverse eenrichtingslagers, eenrichtingskoppeling, vrijloopkoppeling, naaldlagers. Meer dan 2000 standaardmodel van eenrichtingsdrager meer dan 1000 benamingen van metrische en inch-serie naaldlagers worden regelmatig geproduceerd en gebruikt voor motorfietsen, elektrisch en door de lucht aangedreven gereedschappen, printers, lichte en textielindustrie, machines, bouwmachines, auto′s Trucks en kantoorapparatuur in binnenlandse en wereldwijde markten. Bovendien worden er speciale lagers geleverd in overeenstemming met de eisen van de klant voor diverse toepassingen. We hebben onze producten geëxporteerd naar Korea, Iran, Turkije, Bulgarije, Roemenië, Rusland, Italië, Noorwegen, de VS, Canada, Wat
zijn wij?
Onze fabriek was gevestigd in de economisch ontwikkelde kuststad-industriewijk-Wujin Changzhou stad Jiangsu provincie. Hier is het vervoer handig, het zal slechts een uur naar Shanghai met de trein.
Wat wordt het hoofdproduct geproduceerd?
Eenweglagers, eenwegkoppeling, vrijloopkoppeling, tegenaanslagen, nokkenkoppeling, Naaldlager, steunrol en krommingslagers, cilindrische rollagers. Druklagers met een valse zitting. We hebben grote voorraden, en we accpecteren ook productie voor niet-standaard producten, tekeningen of monsters van klanten.
Wat is ons voordeel?
Product: In 1999 begon onze baas als ingenieur eenrichtingslagers te ontwikkelen en ontwerpen toen hij in een grote lagerfabriek werkte. Tot nu toe hebben we successen bij de ontwikkeling van de BB-serie, de MZ-serie, de TFS-serie, de NSS-serie RSBW-serie, die, om bevestigd te worden, een hoog kwaliteitsniveau bereiken dat vergeleken kan worden met het merk Tsubaki van Janpan.
Quliaty equivalent aan Stieber-koppeling, GVN-koppeling, Ringspann-koppeling, Formsprag-koppeling, NSK-koppeling, ect.
GFR-serie, DC-serie, ASNU-serie, NFR-serie, GFK-serie, NF-serie, AE-serie, AA-serie, ECT, die nog bevestigd moet worden, bereiken in een hoog kwaliteitsniveau kan worden vergeleken met HET MERK STIEBER uit het Duits.
FE-serie, FP-serie, FND-serie, FKN-serie eenwegkoppelingslager, dat, om te bevestigen, een hoog kwaliteitsniveau bereikt, kan worden vergeleken met het GVN-merk uit Duitsland.
Onze klanten de hoogste servicestandaard in onze branche blijven bieden. Het is onze bedoeling om voorop te blijven lopen op het gebied van het leveren en ontwerpen van lagers en om onze ontwikkeling naar nieuwe factoren voort te zetten.
Fabrieksapparatuur: Het bedrijf bezit de meest geavanceerde CNC automatische productielijn, automatische assemblagelijn en een verscheidenheid aan testapparatuur. De lagers die we hebben vervaardigd zijn allemaal laag geluidsniveau, lage vibratie, lage wrijving, hoge precisie, hoge afdichting, hoge draaisnelheid en lange levensduur.
Quantility control: 2011 we hebben de ISO9001: 2008 kwaliteitsmanagement systeem certificering gekregen, , al onze producten worden verstuurd voor meerdere malen inspectie. We leveren ook gedetailleerde tekeningen en bieden waar nodig aan.
Wat is de toepassing?
Wordt veel gebruikt in transportmachines, reduceermachines, hijsmachines, liften, auto′s, huishoudelijke apparaten, textielmachines, drukmachines, voedselmachines en mijnmachines, etc.
waar zijn onze producten gezouten?
Onze producten over de hele wereld spelen een belangrijke rol
in Duitsland, Groot-Brittannië, Nederland, Spanje, Italië,
In Indiaas, Indonesië, de Filipijnen, Thailand,
in Iran, Dubai
in Mexico moet
in de Verenigde Staten „Quality and Service” uw belangrijkste zorgen zijn die we in de praktijk hebben gebracht. Blader door onze productcategorie en laat ons uw vragen weten. Ons doel is om onze klanten te voorzien van goede kwaliteit en de beste concurrerende prijzen. Met voldoende voorraad, grote voorraad en handig transport verwelkomen we nieuwe klanten van harte om ons te bezoeken.