Basis Informatie.
Capacity
200000m3 Per Year
Whole Brick Size
4.2*1.2*0.6m
Method
Autoclaved Aerated Concrete
Processing
Brick Cutting Machine
Brick Raw Material
Sand, Cement, Fly Ash
Specificatie
CE, SGS, ISO9001
Oorsprong
Suqian, Jiangsu
Beschrijving
Productbeschrijving
Autoclave voor autoclaven belucht beton blok Making machine AAC machine
1. Beluchte Autoclave concrete Block AAC Block machine AAC block voordelen
(1)de lichte dichtheid
van belucht beton bedraagt gewoonlijk 400-700kg/m3, (volgens de markt voor produkten ), gelijk aan 1/3 van kleisteen en 1/5 gemeenschappelijk beton. Het gebruik van de lichtsteen kan het gewicht van de constructie dus meer verminderen, en ook de straal van dak- en pilaarpers het beste verminderen. Dan kun je zien, kan het het materiaal en de kosten besparen, het ook vechten schudden.
(2) het houden van de temperatuur
die het heeft velen poreus zijn, de leverings-hearting coëfficiënt is 0.9-0,22W/(mk), hetzelfde als 1/4 or1/5 van kleisteen, dus het is de beste materialen nu in de wereld. Er zijn veel soorten materiaal, hebben het laagste afval.
(3)High Strength
High pressure stoom-curing autoclaaf proces geeft AAC een onkoppelbare kracht-gewichtsverhouding, hoger dan zelfs M150 beton en ver overtreft de Indian Building Code vereisten
(4)kostenbesparing
door het lichte AAC-gewicht vermindert het dode gewicht van de bouw drastisch, wat resulteert in een reductie van staal (tot 27%) en cement (tot 20%) structurele kostenbesparing. Omdat de AAC-wandconstructie 8 keer zo groot is als een kleisteen, zijn er 1/3 gewrichten, waardoor de totale mortier tot 66% wordt bespaard
AAC Block Aaerated Autoclave concrete Block AAC Block machine Market Analysis
AAC wordt wereldwijd steeds populairder, van westerse landen tot ontwikkelingslanden. Hieronder Eigenschappen Maak AAC onkoppelbaar bezit, vooral voor hoge gebouwen:
1) Extreme Light Weight
2) Large variety of sizes
3) High Fire Resistant
4) Excellent Thermal Isolation
5) Great Sound Isolation
6) Moisture Protection
7) Termite Resistant
8) High Workability and Easy Processing
4. Luchtbeluchtingsblok voor autoclave betonblok AAC-blokmachine transport
1. Normaal gesproken wordt de ketel door een plat rek verscheept
2. Autoclaven worden verzonden per bulklading
3. De andere onderdelen zullen in een container worden opgeslagen.
2015 Automatische AAC Block machine/Automatische AAC Block Production Line
grondstoffen
de belangrijkste materialen zijn zand, cement, kalk en aluminium poeder.
1. Cement
425 # cement moet aanvaardbaar zijn.
2. Schuur
het zand als norm JC/T 622
, hoe meer kwarts, hoe beter de productie.
Tabel 3-1 Chemische inhoud van zand
Chemische
klasse | SiO2-% | K2O+Na2O % | Organische verbinding | Mica % | SO3% | Modder % | H2O% |
uitstekend | ≥85 | ≤1 | Geschikt | ≤0.5 | 1 | 3 | 8 |
IK | ≥75 | ≤3 | 5 |
II | ≥65 | ≤5 | ≤1 | 2 | 8 |
Table3-2 granulatie van zand
Granulatieklasse
| Percentage |
Uitstekend | I-klasse | II-klasse |
2.5~5.0 (rond gat) | 0 | 0 |
1.25~2.5 (vierkante opening) | 10 | 10 |
0.16~0.25 (vierkante opening) | 60 | 45 |
<0.16 (vierkante opening) | 30 | 45 |
3. Kalk
de kalk wordt als JC/T 621-2009 aangevraagd 4. Aluminum powder
The aluminum powder shall be requested as JC/T 407-2008General Processing Description
1. After crushing, the lime & gypsum grains are stored in vertical silo, the granularity should be no more than 25mm. Then the grains are fed into ball mill by separate belt scale, and will be sent to granular cementation silo when granularity reaches 3500~4000cm2/g.
2. Mill the sand to slurry in wet ball mill and put the slurry into tank for storage.
3. Add the sand slurry, granular cementation materials & cement which are scaled as per proportion into the casting tank equipped with stirrer for mixing, a certain amount of steam should be entered into the stirrer for increasing the raw materials temperature to 40~45ºC.
4. After mixing of 3~4min, open the discharger valve of aluminum powder, feeding into the tank, and continue mixing about 40 seconds, then pour the mixed slurry into mould for casting. The whole cycle is 6~8min.
5. Transport the casting cake with mould to curing zone for foaming and concreting, environment temperature is 40~45ºC and curing time is 90~150min; and then pull out them from the curing zone when the strength reach the lowest cutting strength.
6. Transport the mould with casting cake to cutting zone. A titling machine separates the cake from the mould and put the cake onto loading car after 90 degree overturning. After vertical cutting & cross cutting the cake turns into blocks (L ± 3mm ~ W ± 1.5mm ~ H ± 0.6mm), then the ground turning device turns 90 degree and place the blocks onto autoclave base plate.
7. The loading car transports the cakes into autoclave with temperature 190ºC and steam pressure 1.2MPa, autoclaving cycle is 12H. The tail steam of the autoclave will be recycled into other autoclaves and/or to curing zone by pipe for completely utilization.
8. After autoclaving, the blocks are put in different stacks, and the separate moulds are transported to mold cleaning zone for cleaning and continuously production.
9. The waste materials will be collected into a waste slurry tank, where mixed with fresh materials in a correct proportion for further production.
4.2 Technological data
Mixing cycle: 6 ~ 7 minutes
Casting temperature: 40 ~ 45ºC
Curing time: 2.5 ~ 3.0h
Environment temperature for curing: 45 ~ 55ºC
Autoclave loading /unloading: 0.5h
Vacuuming: 0.5h (0 ~ -0.05MPa)
Pressure up: 1.5h (0.06 ~ 1.2 MPa)
Constant pressure: 7h (1.2 MPa)
Pressure down: 1.5 h (1.2 ~ 0MPa)
Total: 11h
Adres:
No. 188, Zhikou Street, Sucheng District, Suqian, Jiangsu, China
Soort bedrijf:
Fabrikant/fabriek
Zakelijk Bereik:
Bouw & Decoratie Materialen, Produceren & Verwerken Machine
Certificering Van Managementsysteem:
ISO 9001
Bedrijfsintroductie:
Jiangsu Tengyu Machinery Manufacture Co., Ltd. is een van de grote ondernemingen die gespecialiseerd zijn in het vervaardigen van blokmachines en blokvormmachines. Als het uitgangspunt "de vraag van de klant met een gespecialiseerde geest tegemoet komen, een beroemd handelsmerk vormgeven met een idee van verbetering" streeft het bedrijf voortdurend naar kwaliteit en geloofwaardigheid, en houdt het zich aan de geavanceerde productietechnologie van machines voor blokproductie in de wereld.
De producties van TNY zijn AAC-apparatuur, volledig automatische hydraulische drukmachines, volledig automatische productielijnen voor blokken, enz. met een capaciteit van 500 sets machineproductie wordt verkocht aan verschillende districten van China, En export naar tientallen buitenlandse landen en districten over de hele wereld, zoals Australië, Maleisië, Kazachstan, Georgië, India, Angola, Zambia, Zuid-Afrika, Syrië, Brazilië, Venezuela en dergelijke
de acceptatie van en verwachting van onze klanten is de belangrijkste aanmoediging voor Tengyu. Tengyu zal onze klanten meer geavanceerde, gunstige en betere machines bieden en zal ondertussen een snellere en voorzichtigere service leveren.