Guangzhou Jointas Chemical Co., Ltd.

siliconenkit, waterdichte kit, weerbestendige afdichting fabrikant / leverancier in China.

Home Bedrijfsgegevens Product List contact Klik Hier om onderzoek te sturen
Home> Product List> anderen> Twee-component Dichtingsproduct van het Glas van het Silicone het Isolerende (antas-165)

Twee-component Dichtingsproduct van het Glas van het Silicone het Isolerende (antas-165)

MOQ: 10 Pieces
Betalingscondities: LC, T / T, PayPal
Havenplaats: Guangzhou, China
Productiecapaciteit: 400 Units/Day


Basic Info
  • Model No: antas-165
  • Toepassing : Bouw
  • Materiaal : Silicone
  • Classificatie : Uitharding Room
Extra Informatie..
  • Trademark: Antas
  • Packing: 200L+20L, 189L+19L, 180L+18L
  • Standard: 62 kits/container-20 feet
  • Origin: Guangzhou, China
  • HS Code: 3506919010
  • Production Capacity: 400 Units/Day

AT-165 is a two-part, non-structural, neutral-cure insulating glass sealant.It is intended for use as a secondary sealant in a dual-sealed insulating glass unit.
1) Two-component, the curing speed can be adjusted.Fast curing rate, suitable for application indoors.
2) Neutral curing, no corrosion on metal, coated glass and other building materials.
3) Anti-aging, good performance in resistant to ozone and UV radiation.
4) Excellent performance in broad temperature range.No fragility, rigidification or crack at -30º C.And no softening or degradation at 90º C.It always keeps good flexibility when cured.
5) Good compatibility with other neutral silicone sealants.
6) Low water absorption
7) Lot matching of Base and Curing Agent is not required.

Antas-165 silicone sealant for insulating glass should not be applied:
1) as a primary or single seal in an insulating glass unit
2) as secondary seal in an insulating glass units that will be used in structural glazing applications.
3) to building materials that bleed oils, plasticizers or solvents;Materials such as impregnated wood, oil-based caulks, green or partially vulcanized rubber gaskets and tapes
4) in contact with or exposed to sealants that liberate acetic acid.
5) in continuous water immersion or on the surface with fog, or wet surface, or in continuous wet place.
6) when substrate surface temperatures beyond 4º C (39.º C)~40º C(104º C).
7) on surface in direct contact with food.

To obtain ultimate physical properties, Antas-165 should be thoroughly mixed using an airless mixing system.The cure rate may be adjusted by changing the base-to curing agent mix ratio from 9:1 to 13:1 by volume.The recommended mix ratio the base to curing agent is 11:1.Sealant physical properties are not significantly changed over this range.Changes in the temperature and humidity of the environment, however, will affect the working life.Neither hand-mixing nor mechanical mixing is satisfactory due to incorporation of air resulting in altered physical properties.Because of its reactivity with atmospheric moisture, Antas-165B should not be exposed to air for prolonged periods.During shutdown of mixing equipment, dispensing and mixing lines should be purged with uncatalyzed base to minimize sealant build-up.

Quality control tests are recommended to ensure optimum sealant performance, including:
1\ butterfly test to ensure proper mix
2\ working life or cure test to ensure expected sealant cure rate at proper mix ratio.
3\ Tab adhesion to ensure proper sealant adhesion to production surfaces.

Sureface preparation
Before using this product, clean all surfaces, removing all foreign matter and contaminants, such as grease, oil, dust, water, frost, surface dirt, old sealants or glazing compounds and protective coatings.The glass is recommended to be cleared and dried for two times.

Equipment cleaning
When not being used it is recommended that the dispensing equipment be purged either with the uncatalyzed base, or flushed with a suitable solvent.If cured sealant has built up inside the equipment it is recommended to flush the equipment for the appropriate time.The solvent dissolves cured silicone sealant and provides optimum cleaning performance.

It has no toxicity after entirely cured.Avoid eye contact it when operating.If happened, rinse opened eye under running water for several minutes.During the curing process, sealant will release a small amount of organic molecules.Construction should ensure good ventilation.If necessary, take protective measures.Please keep out of reach of children.

AT-165A is in 200L drum(net:180L);
AT-165B is in 20L drum(net:19L).

165A:White, 165B:Black.Mixture:Black

Shelf life:
9 months from the manufacturing date under 27º .

Technical parameters:


Test items

JC/T 486-2001 index

Measured value


Physical form

Even, exquisite paste,

Even, exquisite paste,

No bubble, no skinning, no gel

No bubble, no skinning, no gel


Density, g/cm3

Specified value±0.1



Tack free time,h ≤

≤ 2



Displacement( hot air-water circulation elongation at constant load)(±12.5)

No destruction

No destruction

Destruction (hot air-water circulation elongation at constant load )

No destruction

No destruction


Working time(snap time)




Sag degree(Horizontal),mm,≤

No deformation

No deformation

Sag degree(Verticality),mm,≤

≤ 3



Elongation at constant load

No destruction

No destruction


Hot-press & hard-draw elongation at constant load (%)

No destruction

No destruction


Destruction (water immersion & X-ray elongation at constant load(%) at 60% tensile

No destruction

No destruction

Destruction kind (water immersion & X-ray elongation at constant load

No destruction

No destruction


Elastic recovery



Guangzhou Jointas Chemical Co., Ltd.
Guangdong , China
Heeft Geregistreerd in : 2011
Soort Bedrijf : Fabrikant/fabriek