Basis Informatie.
Nauwkeurigheid
¡± 0,2-0.5%
Hoofd Toepassing
Water, Afvalwater, Bijtend Vloeistof / Gas
Toepassing
Industriële Productie
Type
Elektromagnetische Flow Meter
Meetprincipe
Elektrische Principes
Meetobject
Gesloten Pipeline
Certificaat
JIS, DIN, CE, SGS
Oorsprong
Huai′an, Jiangsu, China
Beschrijving
Description Of Products
Electromagnetic flowmeter is a kind of inductional instrument designed by Faraday's law of electromagnetic induction to measure flow of conductive media in the tube. It adopts the technology of insertion of single chip to realize digital excitation and employs CAN local fieldbus.
Electromagnetic flow meter can realize local indication and output electrical current signal of 4-20mA which can be used to record, adjust and control. Electromagnetic flow meters are widely used in industrial sectors such as chemical industry, environmental protection, metallurgy, pharmaceutical, paper making, water supply and removal etc.
Besides measuring flow of general conductive liquid electromagnetic flowmeter can measure flow of liquid-solid mixed fluid, high-viscosity fluid and salt, strong acid and strong alkali.
Classification of Products
Smart electromagnetic flow meters consist of sensor and smart signal transducer. And it can be classified into two structures--- integral type and remote type according to the set-up form of the sensor and transducer. In terms of integral type electromagnetic flow meters, transducer and sensor directly assembles as a whole and can not be dissociated. It is usually used at the scene where the environmental situation is good. To remote type electromagnetic flow meters transducer composes a product through a special electric cable and sensor. The sensor is installed at the scene and the transducer is installed in the place where the conditions are good. It is usually used at the scene where the environmental situation is poor, such as underground wells, high temperature and the place where people can not reach.
PERFORMANCES & FEATURES
Simple structures, firm, no movable parts and long operation life
No intercepting fluid parts, no pressure loss and fluid clogging
No mechanical inertia, quick response and good stability, apply in automatic examination, adjustment and controlling
Measuring accuracy not influenced by physical parameters such as style, temperature, viscosity, density and pressure.
Employ Teflon or rubber liner and different combination of electrode material such as Hastelloy C, Hastelloy B, 316L,
T itanium and adapt the need of different mediums.
Supply many styles of flowmeters such as inline type and insertion type, etc.
Adopt EEPROM memory to measure operation data, safe and reliable protection of memory.
Integral type flowmeters and remote type flowmeters.
LCD back light display with high clearness
Technical Data
Sheet 1
| Suitable Diameter | DN25~DN2600 (below DN25 non-standard,which should be customized) |
| Electrodes Materials | 316L (stainless steel), Hastelloy C, Hastelloy B, Titanium, Tantalum |
| Suitable Fluid | Liquid with conductive ratio more than 5 μs/cm |
| Measuring Range | 0.1~10m/s (extendable to 15m/s) |
| Upper Limit of Span | 0.5~10m/s. 1~5m/s recommended |
| Accuracy | 0.3%, 0.5%,1.0% |
| Output Signals | 4~20mADC, load<= 750ohm, 0~3kHz, 5V with source and changeable width. high terminal and effective frequency output , RS485 interface |
| Operation Pressure | 1.0MPa, 1.6MPa, 4.0MPa, 16MPa (special) |
| Fluid Temperature | -20C~80C, 80C~130C,130C~180C Depending on Lining Material |
| Ambient Temperature | Sensor -40C~80C. transducer -15C~50C |
| Ambient Humidity | <= 85%RH (at 20C) |
| Cable Outlet Size | M20×1.5 |
| Power Supply | 220VAC±10%, 50Hz±1Hz, 24VDC±10% |
| Power Consumption | <=8W |
| Protection Ratings | Integral type: IP65. remote type: sensor IP68,transducer IP65 |
| Materials of Liner | PTFE, soft rubber, hard rubber, PFA, etc |
| Connection of Flange | National Standard GB9119-88(DIN2051,BS4504) |
| Earthing Materials | 316L (stainless steel), HC, Ti, Ta, Cu |
Model Selection
1. Model Selection Sheet 2
| Code | Nominal Diameter
(mm) | Flow Range
(m3/h) | Code | Nominal Diameter (mm) | Flow Range
(m3/h) |
JC-090-15
JC-090-20
JC-090-25
JC-090-32
JC-090-40
JC-090-50
JC-090-65 JC-090-80
JC-090-100
JC-090-125
JC-090-150
JC-090-200
JC-090-250
JC-090-300
JC-090-350
JC-090-400 | DN15
DN20
DN25
DN32
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN200
DN250
DN300
DN350
DN400 | 0.19~6.36
0.34~11.3
0.53~17.66
0.87~28.94
1.36~45.22
2.12~70.65
3.58~119.40
5.43~180.86
8.48~282.6
13.25~441.56
19.08~635.85
33.91~1130.40
52.99~1766.25
76.30~2543.40
103.86~3461.85
135.65~4521.60 | JC-090-450
JC-090-500
JC-090-600
JC-090-700
JC-090-800
JC-090-900
JC-090-1000
JC-090-1200
JC-090-1400
JC-090-1600
JC-090-1800
JC-090-2000
JC-090-2200
JC-090-2400
JC-090-2600 | DN-450
DN-500
DN-600
DN-700
DN-800
DN-900
DN-1000
DN-1200
DN-1400
DN-1600
DN-1800
DN-2000
DN-2200
DN-2400
DN-2600 | 171.00~5722.65
211.95~7065.00
305.21~10173.00
415.42~13847.40
542.59~18086.40
686.72~22890.60
847.80~28260.00
1220.83~40694.40
1661.69~55389.60
2170.37~72345.60
2746.87.00~91562.40
3391.20~113040.00
4103.35~136778.40
4883.33~162777.60
5731.13~191037.60 |
| Code | Electrode Material |
K1
K2
K3
K4
K5
K6
K7 | SS 316L
Hastelloy B
Hastelloy C
Titanium
Tantalum
Pt/Iridium Alloy
Stainless Steel Painting Tungsten Carbide |
| | Code | Material of liner |
| | C1
C2
C3
C4
C5
C6
C7 | PTFE (F4 or Teflon)
Fluorinated Ethylene Propylene (FEP)
Fs
PO (Soft Rubber)
Polyurethane Rubber (PUR)
Hard Rubber
PFA |
| Code | Function |
E1
E2
E3
F1
F2
F3
F4
T1
T2
T3
P1
P2
P3
P4
P0
D1
D2
D3
J1
J2
J3 | Class 0.3%
Class 0.5%
Class 1.0%
4~20mADC, load ≤750Ω
0~3kHz, 5V active, changeable pulse, high-terminal and effective frequency output
RS 485 interface (Modbus)
HART
Normal Temperature
High Temperature
Ultra Temperature
1.0MPa
1.6MPa
4.0MPa
16MPa
Special Pressure
220VAC+10%; 50Hz+ 1Hz
24VDC+10%
Battery Operated
Integral Type
Remote Type
Explosion-proof, Integral |
| EN | English |
2. Selection of Liner
Sheet 3
| Material of Liner | Main Functions | Max Fluid Temp. | Application
|
| Integral | Remote |
Teflon
(PTFE)
| 1. Most steady plastic of chemical living
energy; resist boiling hydrochloric acid, sulfuric acid, nitric acid, nitro- hydrochloric acid, thick alkali and all kinds of organic solvent; not resist chlorine trifluoride, chlorine trifluoride of high temperature, liquid fluorine of high rate, liquid fluorine, corrosion of ozone
2. Performance of resisting abrasion not
as good as polyurethane rubber
3. Capability of resisting sub atmospheric pressure not as good as polychlorobutadiene rubber |
100 C |
120
150C (require special order) |
1. Thick acid, alkali, etc. with strong corrosion
2. Sanitary mediums
3. Industrial Waste water |
| Fluorinated Ethylene Propylene (FEP) | | Same above | |
| Fs | Upper limit of suitable temperature lower than teflon, as well as cost |
70 C | 80C | |
Polychlorobutadiene rubber
| 1.Excellent elasticity, high strength of pulling apart, good performance of resisting abrasion
2.Resist corrosion of generally low- density acid, alkali and salt; not resist corrosion of oxidized matters | 80C
120C
(require special order) |
Water, sewage, mud and pulp with weak abrasion |
| Polyurethane rubber | 1.Strong performance of resisting abrasion
2. Poor performance of resisting corrosion |
80C | Neutral pulp, coal and mud with strong abrasion |
3. Selection of Materials of Electrodes
Sheet 4
| Materials of electrodes | Performance of resisting erosion and abrasion |
Stainless steel
0Cr18Ni12Mo2Ti | Apply to industrial water, domestic water, polluted water, etc. with weak erosion, applied in petroleum chemical industry, steel and iron,etc. and fields in government and environmental protection |
| Hastelloy B | Good performance of resisting erosion to hydrochloric acid of all degrees of density below the boiling point; resisting sulfuric acid, phosphoric acid, hydrofluoric acid, organic acid, etc. non- chlorine acid, alkali, erosion of non-oxidized salty fluid |
| Hastelloy C | Resisting non-oxidized acid, such as nitric acid, nitration mixture, or the erosion of the mixture of chromic acid and sulfuric acid; resisting oxidized salt such as Fe +++, Cu++ or the erosion of other oxidizers, such as the erosion of higher than normal temperature hypochlorite liquor and the sea water |
| Titanium | Resisting erosion of sea water, all kinds of chloride and hypochlorite, oxidized acids (including Fuming sulfuric acid), organic acid, alkali; not resisting the erosion of purer reducing acids( such as sulfuric acid, hydrochloric acid); if oxidizer exists in acids (such as nitric acid, Fe+++. Cu++) the erosion will reduce greatly. |
| Tantalum | Good performance of resisting erosion, similar to glass; Besides hydrofluoric acid, fuming nitric acid, alkali, nearly can resist erosion of all chemical mediums(including boiling hydrochloric acid, nitric acid and below 150ºC sulfuric acid ). Not resisting erosion in alkali. |
| Pt/ Iridium Alloy | Can nearly resist all chemical matters, not fit for aqua regia and ammonium salt |
Stainless Steel Painting
Tungsten Carbide | Fit for mediums without erosion and strong attrition |
| Remarks: Due to multiple types the erosion is subject to complex factors such as temperature, density, flow rate etc., this sheet is only for reference. Users should make decision according to practical conditions, if necessary make experiment of resisting erosion of to-be-chosen materials, such as the experiment of hanging pieces |
Adres:
No288, Tongtai Road, Jinhu Industrial Park, Huai′an, Jiangsu, China
Soort bedrijf:
Fabrikant/fabriek, Handelsbedrijf, Groepsmaatschappij
Zakelijk Bereik:
Ijzerwaren & Gereedschap, Industriële Apparaturen & Onderdelen, Instrumenten & Meters
Certificering Van Managementsysteem:
ISO 9001, ISO 9000
Bedrijfsintroductie:
De Jiechuang Group, BCST, kortom, is een toonaangevende groep in China, gespecialiseerd in automatische instrumenten. Met meer dan 20 jaar oude ervaringen op dit gebied is het uitgegroeid tot een groep, die 256 medewerkers bezit en een oppervlakte van 20000 m2 beslaat. Het heeft dochterondernemingen van Jiangsu Jiechuang Science and Technology Co., Ltd, Jiangsu Jiechuang Flow instrument Co., Ltd, Jiechuang XingYu Cable Co., Ltd en Jiangsu Jiechuang International E&I Co., Ltd.
opgericht in 2000, is Jiangsu Jiechuang Science and Technology Co., Ltd. een fabrikant en handelaar gespecialiseerd in het onderzoek, ontwikkeling en productie van stromingsmeetinstrumenten, drukmeetinstrument, niveaumeetinstrument en temperatuurinstrumenten. De fabrieken zijn gevestigd in Jinhu County, Nanjing Province, met zeer handige vervoer toegang tot Nanjing en Shanghai. Al onze producten voldoen aan internationale kwaliteitsnormen en winnen een hoge reputatie in verschillende landen en gebieden.
We hebben het certificaat van ISO 9001: 2000, CE en SGS. Met hightech faciliteiten en een uitstekend team, gekwalificeerde producten en een concurrerende prijs is onze voortdurende streven.
We staan klaar om onze uitstekende producten en beste diensten aan te bieden aan onze oude en nieuwe klanten in binnen- en buitenland.
Welkom om onze website te bezoeken en onze fabrieken te bezoeken.
