Ground Protection Mat Made of 100% Virgin HDPE Access Ground Mat

• After-sales Service: Support After-Sales
• Warranty: Support After-Sales
• Materiaal: PE
• Soort: Engineering Plastics blad
• Absorptie van het Water: <0,01%
• Samentrekking Percentage: <0.4%
• Model NR.: ground protection mat
• Treksterkte: 30~40MPa
• productnaam: grondbeschermingsmat
• trefwoord: grondmat
• standaardformaat: 2440×1220
• dikte: 12,7 mm, 15 mm, 18 mm, 19 mm, 20 mm, 25 mm, 1-200 mm
• kleuren: aangepast
• grootte: indien nodig
• toepassing: tijdelijke vloeren
• functie: milieuvriendelijk
• merknaam: abosn
• verwerkingsservice: extrusie
• grondstoffen: pe virgin 100%
• gebruik: bescherming tegen de grond
• moq: 50
• Transportpakket: Carton or Wooden Cases
• Specificatie: customized
• Handelsmerk: as your requests
• Oorsprong: China
• Gs-Code: 3920109090
• Productiecapaciteit: 5000000 Kgs/ Year

Beschrijving

                                                         Abosn HDPE ground protection mat
Abosn's ground protection mats are designed to protect soft or sensitive ground conditions for the safe passage of machinery and heavy vehicles.
Made of 100% virgin material, our road mats can be reused many times and are 100% recyclable after use. It is truly environmentally friendly, green and pollution-free.
It is the best alternative to expensive aluminum protection systems, will never rot and is the best alternative to wood. Our products are mainly used by ground engineering companies, outdoor activity companies, landscaping contractor
 

 

Patterns Choice

Four pattens you can Choose

 

Standard size

2000X1000mm, 3000X1500mm, 2440X1220mm, 2440X610mm,                   Maximum width:2400mm 2900X1100mm, 3000X2000mm, 4000X2000mm

Our ground protection mats provide the following solutions:
Temporary roads, temporary parking lots, passages, transport roads, pedestrian walkways, ditches, tree root protection, lawn protection, boulder reinforcement, porous paving, our company provides ground on a global scale Sales and rental of protective pads.
 

 

Product Parameters

 

Factor	virgin HDPE	Resistance to Ultra-violet	Poor
Tensile Strength(MPa)	22	Radiation resistance	Fair
Notched Impacted Strength Kj/m2	No break	Dielectric constant@1MHz	2.3-2.4
Elongation at break (%)	>100%	Dielectric strength(KV/ mm)	22
Acids-concentrated	Good--Fair	Dissipation Factor@1MHz	1-10*10
Acids-dilute	Good	Surface resistivity(Ohm/sq)	10
Aromatic hydrocarbons	Fair	Volume resistivity(Ohm-cm)	10-10
Greases and Oils	Good-Fair	Water absorption-over 24 hours (%)	<0.01
Halogenated Hydrocarbons	Fair-Poor	Density(g/cm)	0.93-0.97
Halogens	Fair-Poor	Alkalis	Good
Ketones	Good-Fair	Alcohols	Good

Application

 

Packaging & Shipping

 

factory display

 

 We offer excellent sliding properties and abrasion/wear resistance due to its low coefficient of friction. HDPE Sheet is very tough and impact resistant, even at low temperatures, it is lightweight, easy to weld but difficult to bond. As a thermoplastic sheet manufacturer in China, Abosn can supply both single color and Dual-color HDPE sheets to suit customer demands. We own the most advanced Extrusion machines to extrude HDPE sheets with fixed material under certain pressure and temperature. HDPE Sheet has an almost waxy feel to it and is pretty good at being a low friction wear strip material and is used probably more than any other plastic as a wear strip on conveyors or production lines of huge companies. While it is difficult to bond effectively to anything, which means that HDPE Sheet will need to be physically or mechanically fixed in place using screws etc.
 

Certifications

 

 

Our customers

 

Q: Are we a source factory or a trading company?
A: Our company was established in 1989 and is the earliest manufacturer of engineering plastics. We have accumulated a lot of production experience in the production of HDPE and UHMWPE products. Large-scale foreign plastic suppliers have cooperated with us for a long time, and our customers are located in more than 100 countries.
Q: Can you complete the production and processing of the product independently? Do you need an outsourcing partner?
A: We have the most advanced CNC processing machines in China and have an independent design department. Any product can be produced.
Q: How to let customers understand our quality?
A: According to the customer's demand for the product, we can provide customers with free samples no larger than 10 cm x 10 cm, and the customer only needs to bear the shipping cost of the sample.
Q: Do you provide private customization services?
A: In order to meet the needs of customers, customers can customize the size, color, pattern, material, etc. In addition, we provide Logo printing services.
Q: Is there any guarantee after sale?
A: We have decades of brand quality. The company is positioned to produce mid-to-high-end products for customers, not inferior and low-priced products. All products have quality assurance and one-year after-sales service for customers.