LCD Display 220~264V Single Phase Two Wire Kwh 10-80A Input AC Multifunction Smart Electric Energy Meter with RS485 Modbus

• Warranty: 2 Years
• Tonen: LCD Display
• Installatie: Rechtstreeks aangesloten
• Gebruik: Multifunctionele Meter van de Energie, Meter voor industrie en thuisgebruik, Standard Electric Energy Meter, Reactieve Meter van de Energie, Multi-rate kWh-meters, Maximale vraag Meter
• Electric Equipment: Single-fase
• Theorie: Statische Meter
• Model NR.: ADL200
• Power Meter Connection: Terminal
• Gemeten signaal: Continu Wave
• Type: Energy Meter
• Certificaat: RoHS, ISO, CE, MID
• Aangepaste: Op maat
• communicatie: RS485 Modbus-RTU, Dl/T 645
• frequentie: 45 - 60 hz
• nauwkeurigheid: 0.5
• toepassing: EV Charging Pile, Solar PV
• functie: multi-tarief
• Transportpakket: Carton
• Specificatie: single phase energy meter
• Handelsmerk: Acrel
• Oorsprong: China
• Gs-Code: 9028301300

Beschrijving

 

Acrel ADL200 MID Single-Phase Energy Meter

Product Description

Measurement: 1-phase AC kWh, Active Power, Current, Voltage and etc

Accuracy: 1.0% (kWh)

Frequency: 45~65Hz

Rated Voltage: 220~264Vac (direct connect)

Rated Current: 10(80)A AC (direct connect)

Communication: RS485 (MODBUS-RTU)

Dimension: 90*36*65mm (L*W*H)

Installation: 35mm DIN Rail

Standard&Certificate: IEC; CE;CE-MID;EAC

Multi-rate: 4 Tariff Rates and etc
ADL200 single-phase electronic watt-hour meter is mainly used to measure single-phase active energy in low-voltage networks. It can also measure voltage, current, power and other electricity. It can also be equipped with RS485 communication function to facilitate users to monitor, collect and manage electricity consumption. It can be flexibly installed in the distribution box to realize the sub-item electric energy measurement, statistics and analysis of different areas and different loads. The product meets the requirements of the national standard GB/T17215.321-2008 and the enterprise standard Q31/0114000129C035-2017 "Enterprise Standard for Rail Mounted Electric Energy Meters".

Application

Features

	Diverse Electricity Parameters Measurement  U (Voltage)  I (Current)  P (Power)  Q (Reactive power)  S (Apparent power)  PF (Power factor)  kWh (Kilowatt-hours)  kVarh (Kilovar-hours)
	Multi-rate/Flexible Tariff  4 Time zone  4 Tariff rate (Spike, Peak, Flat, Valley)  2 Time period list  14 Time period by day
	HMI for Parameters Setting  Code  Protocol  Address  Baud rate  Parity  All Display

 

Product Parameters

 

Input voltage	Reference voltage	AC 220V
	Reference frequency	50Hz
	Power consumption	<10VA
Input current	Basic current	10A
	Maximum current	80A
	Starting current	4‰Ib
	Consumption	<4VA
Measurement performance	Accuracy of measuring	1 class
	Range of measuring	000000.00~99999999kWh
Clock accuracy		Error≤0.5s/d
Active pulse	Pulse width	80±20ms
	Pulse constant	1000imp/kWh
Communicati on	Interface	RS485(A+,B-)
	Connection mode	Shielded twisted pair conductors
	Protocol	MODBUS-RTU

 

Temperature range	Work temperature	-25ºC~55ºC
	Storage Temperature	-40ºC~70ºC
Relative humidity		≤95%(No condensation)
Altitude		<2000m

 

Wiring Chart

 

PIN/Terminal Overview of ADL200

Power Wiring: 1-phase 2-wire via direct connect

Communication Wiring: RS485 wired Communication with IoT Gateway

 

Dimension

 

Solution

Company Profile