High Voltage Surge Arrester Disconnector Arrester Lightning with PMC Insulating Bracket

• Type: Power Source Arrester
• Structuur: Valve Type Arrester
• Installatie: parallelle Arrester
• Toepassing: Power Plants
• Grootte: Meidoem
• Operation Voltage: Low Voltage
• Model NR.: Yh5w (YH10W) -6kv
• Vorm: Spiral
• Materiaal: Keramische
• Certificaat: ROHS, ISO9001, CCC
• Merk: Honle
• Transportpakket: Standard
• Handelsmerk: HONLE
• Oorsprong: Zhejiang, China
• Gs-Code: 8535400000
• Productiecapaciteit: 1000PCS Per Month

Beschrijving

Honle Yh5w (YH10W) -6kv High Voltage Surge Arrester Disconnector Arrester Lightning with PMC Insulating Bracket

Application     
Protection of medium/high voltage AC networks against both, multiple atmospheric and switching  over voltages  as well as Very Fast Transients (VFT). Suitable for the protection of transformers, transformers in arc furnace applications, cables,generators,parallel to capacitor banks,and railway vehicles.Can be used mechanically as support insulator or as suspension insulator in case  of  application as line arrester  For indoor and outdoor installation.

 

Keystone  
    The metal-oxide surge arrester (MOSA) is the most advanced over voltage protector in the word.Due to make the varistor of core com-ponent mainly adopt MOSA. Compared with the conventional silicone carbide arrester, this prescription of the product improves greatly the Voltage-Current(U-I)characteristic of the metal-oxide varistor and increased through-current capability at over- voltage so as to bring a radical-changes for the characteristic of the MOSA.
     
Under the circumstance of normal operating voltage, the current through the MOSA  just  on  microampere degree. When suffered from over voltage,the MOSA's excellent non-linear characteristic will make the current through the  MOSA  increase  to several thousand ampere,While the MOSA will be under the circulating state and release over voltage energy so as to protecting the power transmission  equipments against the damage caused by the over voltage.

 

Usual service condition                                                                          
a) Ambient air temperature within the range of -55ºC to +50ºC.
b) Altitude not exceeding 2000m.
c) Frequency of the A.C. Power supply not less than 48Hz and not exceeding 62Hz.
d) Power frequency voltage applied continuously between the terminals of the arrester not exceeding its continuous operating voltage.
e) Maximum wind speed not exceeding 35m/s.
f) Earthquake intensity not exceeding 7 degrees.

 

Technical Data of Metal Oxide Surge Arrester (Type: HL5W-3~18)
	Manufacturer			Honle Group Co.,Ltd
	Rated Voltage	kV	3	6	9	12	15	18
	Nominal discharge current	kA	5	5	5	5	5	5
1	General Feature	Unit
1.1	Applicable standard			IEC60099-4(2004)
1.2	Type designation		HL5W-3	HL5W-6	HL5W-9	HL5W-12	HL5W-15	HL5W-18
1.3	Housing material		Silicone  rubber	Silicone  rubber	Silicone  rubber	Silicone  rubber	Silicone  rubber	Silicone  rubber
1.4	With(out) gqps		Without	Without	Without	Without	Without	Without
2	Ratings & characteristics
2.1	Rated frequency	Hz	50/60	50/60	50/60	50/60	50/60	50/60
2.2	Residual voltage at
	-lightning impule 8/20μs	kV	8.5	17	25.5	34	42.5	51
	-steep current impulse 1/10μs	kV	9.8	19.6	29.4	39.2	49	58.8
	-switching impulse 30/60μs(10kA&up)	kV	7.3	14.6	21.9	29.4	36.6	43.9
	-switching wave(class 1&up)	kA	0.5	0.5	0.5	0.5	0.5	0.5
2.3	Continuous operating voltage	kV	2.55	5.1	7.65	9.6	12.7	15.3
2.4	Power freqncy reference voltage	kV	≥3	≥6	≥9	≥12	≥15	≥18
2.5	Long duration current impulse withstand
	-2ms rectangular current withstand	A	150	150	150	150	150	150
2.6	Operating duty
	-4/10μs high current impulse withstand	kA	65	65	65	65	65	65
2.7	Housing insulation level
	-lightning impulse	kV	15	30	40	50	70	80
	-power frequency,wet 1 min	kV	10	15	30	30	35	40
2.8	Partial discharge	pC	≤10
2.9	Power frequency voltage versus time		1.15UR-0.1s   1.10UR-1s   1.05UR-1s   1UR-1200s
2.10	Other ratings & characteristics
	-torsional	Nm	60	60	60	60	60	60
2.11	creepage distance/rated voltage ratio(General)	kV/mm	≥25	≥25	≥25	≥25	≥25	≥25

OUR FACTORY

FAQ
Q1: Are you a manufacturer or trading company?
A1: Our company cover an area of over 20000m2, we can produce more than 2000 products each month.

Q2: How long have you been worked in the electric industry?
A2: We have been worked in the electric industry for more than 20 years. We have own research and development department that has 15 engineering technicians.

Q3: Would you accept using customer's logo?
A3: Yes, we can provide OEM and ODM service.

Q4: What's the payment terms?
A4: We accept T/T, L/C, PayPal, etc.

Q5: What is the standard of package?
A5: Export standard package or special package according to customer's requirement.

Q6:When you ship my order?
A6:Normally 30 to 45 days after receiving your payment,but it can be negotiated based on production schedule.

Q7:What kind of certificates you have ?
A7:Our company already achieve ISO9001, and for products, we have CE,ISO9001,ISO14001 and so on.

Q8:Where is your market?
A8:Our products are popular in North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western European so on. Our company has established branches in Uganda and Kenya in Africa. We will also further expand the market and strive to set up a branch overseas every year.