Oil Pipeline Pump Double Suction Between Bearings Centrifugal Water Pump

• After-sales Service: Help Check
• Warranty: 1year
• Max.Head: >150m
• Max.Capacity: >400 L/min
• Driving Type: Motor
• Impeller Number: Single-Stage Pump
• Working Pressure: Low Pressure Pump
• Influent Type of Impeller: Single Suction Pump
• Position of Pump Shaft: Vertical Pump
• Pump Casing Combined: Verticaljoint Surface Pump
• Mounting Height: Since Irrigation Centrifugal Pumps
• Impeller: Open
• Usage: Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
• temperatuur: -80~+450ºC
• ~5.0mpa: druk
• industrie: waterpomp
• media: water
• theorie: centrifugaalpomp
• gemiddeld: pH Value 5~9
• montagerichting: verticaal
• hoogte: max. 1000 m.
• pomptoerental: 2980 tpm
• beschermingsklasse motor: ip55
• oem-service: ondersteund
• Transportpakket: Wooden Case
• Specificatie: API610 / Vdma24297
• Handelsmerk: FAGGIOLATI
• Oorsprong: Jiangsu, China
• Gs-Code: 8413709990
• Productiecapaciteit: 2000piece/Year

Beschrijving

 

Conform to design standard of ISO2858,GB/T5656
Flow range: 12000m²/h
Lift range: ~135m
Design pressure: ~1.6MPa
Application temperature: -20~125ºC
Aplication field: This series of pump is mainly used in industries of oil refinery, petrochemical engineering, low temperature engineering, coal chemical industry, power plant, environmental protection engineering, wastewater treatment, cement plant etc.
Suitable for transporting circulating water and wastewater medium of chemical process.

Pump body
The designed pressures of the pump are 1.6Mpa and 2.0 Mpa. In order to meet different users' requirements around the world, the relevant inlet and outlet flages of pump body can be chosen according to ANSI, PN and JIS standards. These inletand outlet flanges are all installed in the lower part of pump body, so the rotor can be taken out without disassemb-ling pipelines of the system, and it is convenient to repair. Part of the pump body adopts a double - flow - passage stru-cture in design, which can lower the radial force and extend the life of the mechanic seal and the bearing.

Blade wheel
The hydraulic design of the blade wheel uses the up-to-date CFD technology, which can improve the hydraulic efficiency of the pump. The blade wheel has been made in a dynamic balance, so as to make sure that model-S pump can run very smoothly.

Shaft
The diameter of the shaft is big, while the gap between bearings is short. This can lower the deflection of the shaft, so as to extend the life of the mechanic seal and the bearing.

Shaft casing
For model-S' pumps, the shaft casing can be made of many different materials, so as to protect the shaft from co-rrosion and abrasion. The shaft casing can be replaced.

Abrasion ring
Areplaceable abrasion ring is installed between the pump body and blade wheel, so as to protect the pump body and blade wheel from abrasion. It is convenient to replace. This results in low maintenance cost, guarantees enough runn-ing gap and high efficiency.

Stuffing
The pump with unique stuffing design can use not only stuffing, but also mechanic seal. The seal device can be replac-ed without disassembling pump cover.

Bearing
The unique bearing design makes it possible that the bearing can use either grease or thin oil for lubrication. The des-igned life of the bearing can be up to more than 100,000 hours. A double - row thrust bearing or closed - type bearing can also be used.

Materials
According to actual demands of users, the materials of model -S horizontal medium - open pump can be copper,cast iron, nodular cast iron, 316 stainless steel, 416 stainless steel, duplex steel. Hastelloy, monel mental, Titanium alloy, 20# alloy, etc.

 

Payment Term

Payment Terms	T/T	EXW	50% T/T in advance, the balance to be paid before dispatch
		FOB
		CIF	50% T/T in advance, the balance to be paid against the copy of B/L
		CFR (C&F)
	L/C	Irrevocable L/C at sight could be accepted if amount above US $50,000.00
Delivery Time	30-45 days after receiving advanced payment

FAQ

1. When can I get the quotation?
We usually quote 24 hours after we get your inquiry. If you are very urgent to get the price, please call us or tell us in your e-mail so that we will regard your inquiry priority.

2. Can you do the design for us?
Yes. We have a professional team having rich experience in design and manufacturing. Just tell us your idea and we will help to carry out your ideas. It does not matter if you do not have someone to complete files. Send us high resolution images, your logo and text and tell us how you would like to arrange them. We will send you finished files for confirmation.

3. What about the lead time for mass production?
Honestly, it depends on the order quantity and the season you place the order. The lead time of MOQ is about 30 to 45 days(Except for the selected brand).Generally speaking, we suggest that you start inquiry two months before the date you would like to get the product at your country.

4. What is your terms of delivery?
We accept EXW, FOB, C&F and CIF, etc. You can choose the one which is the most convenient or cost effective for you.