Lymc-lager van de roterende tafel, lager met kruisrol, Yrt150, Yrt-serie, Zkldf-serie

• Rolling Body: Lagers van de Rol
• Het aantal rijen: Single
• Outer Dimension: Kleine en middelgrote (60-115mm)
• Materiaal: Gcr15
• Bolvormig: Niet-uitlijnen Lagers
• Load Richting: Axial Bearing
• Gescheiden: Ongescheiden
• voordeel: laag geluidsniveau, lage vibratie, hoge precesie
• type afdichtingen: als vereiste
• moq: 1 set
• toepassing: roterende tafel, richtkop, motor voor directe aandrijving
• levertijd: 3-40 dagen
• oem&odm: ja
• tanden: geen tanden
• gewicht: 25 kg
• nauwkeurigheid: p2, p4, p5
• Transportpakket: Plywood Package
• Specificatie: 325x450x60mm
• Handelsmerk: LYMC
• Oorsprong: Luoyang
• Gs-Code: 8482500090
• Productiecapaciteit: 20000piece/Years

Beschrijving

YRT325 YRT bearing 325x450x60mm,GCr15SiMn material,58-62 Hardness

YRT bearing

Axial/radial bearings YRT, YRTC and YRTS and axial angular contact ball bearings ZKLDF are ready-to-fit high precision bearings for high precision applications with combined loads. They can support radial loads, axial loads from both sides and tilting moments without clearance and are particularly suitable for bearing arrangements with high requirements for running accuracy.
 

Simple mounting due to fixing holes

Due to the fixing holes in the bearing rings, mounting of the units is very simple. After mounting, the bearings are radially and axially preloaded. The mounting dimensions of all series are identical.

Axial/radial bearings YRT, YRTC and YRTS

Axial/radial bearings are double direction axial bearings for screw mounting, with a radial guidance bearing. These ready-to-fit, greased units are very rigid, have high load carrying capacity and run with particularly high accuracy. They can support radial forces, axial forces from both directions and tilting moments free from clearance. The bearings are available in several series

YRT and YRTC suitable for low speeds and small operating durations

For standard applications with low speeds and small operating durations, such as indexing tables and swivel type milling heads, the most suitable bearings are series YRT and YRTC.

YRTS suitable for high speeds with low frictional torque

For the bearing arrangements of direct drive axes, there is the series YRTS. Due to their high limiting speeds and very low, uniform frictional torque across the whole speed range, these bearings are particularly suitable for combination with torque motors.

For higher running accuracy requirements, both series are also available with restricted axial and radial runout.

Axial angular contact ball bearings ZKLDF

Suitable for high speeds and long operating durations

Axial angular contact ball bearings ZKLDF are highly suitable for high speed applications with long operating duration . They are characterised by high tilting rigidity, low friction and low lubricant consumption.

Bearing type	Boundary dimensions								Fixing holes						Basic load rating				weight
	d	D	H	H1	C	d1	dn	dm	Inner ring				Outer ring		axial		radial
															dynamic	static	dynamic	static
	mm								d0	ds	Ts	qty	dL	qty	Ca	Coa	Cr	Cor
									mm				mm		KN				kg
YRT50	50	126	30	20	10	105	63	116	5.6	9	4.2	10	5.6	12	38	158	28.5	49.5	1.6
YRT80	80	146	35	23.35	12	130	92	138	5.6	10	4.2	10	4.6	12	56	255	42.5	100	2.4
YRT100	100	185	38	25	12	160	112	170	5.6	10	5.4	16	5.6	15	76.5	415	47.5	120	4.1
YRT120	120	210	40	26	12	184	135	195	7	11	6.2	22	7	21	102	540	52	143	5.3
YRT150	150	240	40	26	12	214	165	225	7	11	6.2	34	7	33	112	630	56	170	6.2
YRT180	180	280	43	29	15	244	194	260	7	11	6.2	46	7	45	118	710	69.5	200	7.7
YRT200	200	300	45	30	15	274	215	285	7	11	6.2	46	7	45	120	765	81.5	220	9.7
YRT260	260	385	55	36.5	18	345	280	365	9.3	15	8.2	34	9.3	33	160	1060	93	290	18.3
YRT325	325	450	60	40	20	415	342	430	9.3	15	8.2	34	9.3	33	275	1930	120	345	25
YRT395	395	525	65	42.5	20	486	415	505	9.3	15	8.2	46	9.3	45	300	2280	186	655	33
YRT460	460	600	70	46	22	560	482	580	10	15	8.2	46	10	45	355	2800	200	765	45
YRT580	580	750	90	60	30	700	610	720	11.4	18	11	46	11.4	42	490	4250	228	965	89
YRT650	650	870	122	78	34	800	680	830	14	20	13	46	14	42	1040	8000	490	1800	170
YRT850	850	1095	124	80.5	37	1018	890	1055	18.5	26	17	57	18.5	54	1000	8650	455	1730	253
YRT950	950	1200	132	86	40	1130	990	1160	18.5	26	17	57	18.5	54	1290	11400	530	2040	312
YRT1030	1030	1300	145	92.5	40	1215	1075	1255	18.5	26	17	66	18.5	66	1380	12000	620	2650	375
YRT1200	1200	1490	164	108	52	1410	1240	1445	18.5	26	17	66	18.5	66	1435	12850	745	2800	450

ZKLDF:
 

Bearing Type	Dimension										The fixing hole
	d	D	H	H1	D1	D2	D3	J	J1	a	Inner ring			Outer ring
	Unit:mm										d1	d2	^3^) QTY^3^)	d3	^3^) QTY^3^)
											mm			mm
ZKLDF100	100	185	38	25	160	136	158	112	170	5.4	5.6	10	16	5.6	15
ZKLDF120	120	210	40	26	184	159	161	135	195	6.2	7	11	22	7	21
ZKLDF150	150	240	40	26	214	188	211	165	225	6.2	7	11	34	7	33
ZKLDF200	200	300	45	30	274	243	271	215	285	6.2	7	11	46	7	45
ZKLDF260	260	385	55	36.5	345	313	348	280	365	8.2	9.3	15	34	9.3	33
ZKLDF325	325	450	60	40	415	380	413	342	430	8.2	9.3	15	34	9.3	33
ZKLDF395	395	525	65	42.5	486	450	488	415	505	8.2	9.3	15	46	9.3	45
ZKLDF460	460	600	70	46	560	520	563	482	580	8.2	9.3	15	46	9.3	45
ZKLDF580	580	750	90	60	702	656	700	610	720	11	11.4	18	45	11.4	42

 

Screw connection QTY	Connect screw holes		^1) Pitch^1) t	Tightening torque of screw	Basic rated load		^4^) Limited speed^4^)	Bearing friction torque	Weight	Type
					Axial
					Dynamic	Static
				MA^2^)	Ca	Coa	Grease lubrication
	G		Xt	Nm	kN		r/min	Nm	≈Kg
2	M5	3	18×20°	8.5	67	251	2800	1.6	4.5	ZKLDF100
2	M8	3	24×15°	14	72	315	2400	2	6	ZKLDF120
2	M8	3	36×10°	14	76	365	2000	3	7.5	ZKLDF150
2	M8	3	48×7.5°	14	112	550	1600	4.5	11	ZKLDF200
2	M12	3	36×10°	34	155	920	1200	7.5	22	ZKLDF260
2	M12	3	36×10°	34	165	1110	1000	11	28	ZKLDF325
2	M12	3	48×7.5°	34	214	1470	800	16	39	ZKLDF395
2	M12	3	48×7.5°	34	255	1860	700	21	50	ZKLDF460
3	M12	6	48×7.5°	68	395	3180	500	40	82	ZKLDF580

How to install the YRT bearing

YRT rotary table bearing consists of a thrust / centripetal shaft ring, a thrust washer, two needle roller cage assemblies and a group of centripetal cylindrical rollers. The seat ring and shaft ring are provided with uniformly distributed screw holes for installation. However, this kind of bearing also has high requirements for matching equipment parts. The tightening torque of the mounting screws shall be controlled during installation. The following is the installation related knowledge:

1. the requirements for the matching structure are high. During transportation, the fixing screws protect the bearing parts of YRT turntable. In order to facilitate centering installation, the fixing screws can be loosened during installation. After installation, the fixing screws should be tightened again or replaced with setting screws.

2. L-section ring can be installed with or without additional support ring

3. the assembly force can only be transmitted through the installed YRT turntable bearing ring, not through the rolling element.

4. set screws shall be tightened with a torque wrench in the form of cross.

5. do not separate or exchange the bearing parts of YRT turntable for installation and disassembly.

Product Process

About Us:

Luoyang MC Bearing Technology Co.,Ltd (LYMC),who is manufacture located in bearing zone, focus on Slewing bearing, cross roller bearing and pinion,Dia from 50mm-8000mm, Our team with technical and full experience in the bearing industry.
*Professional in researching, developing, producing & marketing high precision bearings for 16 years;
*Many series bearings are on stock; Factory directly provide, most competitive price;
*Advanced CNC equipment, guarantee product accuracy & stability;
*One stop purchasing, product include cross roller bearing, rotary table bearing, robotic bearing, slewing bearing, angular contact ball bearing, large and extra large custom made bearing, diameter from 50~9000mm;
*Excellent pre-sale & after sale service. We can go to customers' project site if needed.
*Professional technical & exporting team ensure excellent product design, quotation, delivering, documentation & custom clearance.

Our Service:

FAQ:
1.Q: Are you trading company or manufacturer ?
A: We are professional slewing bearing manufacturer with 20 years' experience.
2.Q: How long is your delivery time?
A: Generally it is 4-5 days if the goods are in stock. or it is 45 days if the goods are not in
stock, Also it is according to quantity.
3.Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample, it is extra.
4.Q: What is your terms of payment ?
A: 30% T/T in advance, 70% balance before shipment.
5.Q: Can you provide special customization according to the working conditions?
A: Sure, we can design and produce the slewing bearings for different working conditions.
6.Q: How about your guarantee?
A: We provide lifelong after-sales technical servic