Hand Push Thermoplastic Paint Road Marking Machine

1.)  RS-1A & RS-1B Hand Push Thermoplastic Road Marking Machine

Hand Push Thermoplastic Road Marking Machine is special-purpose equipment for thermoplastic road marking. It is used for highway, road axis, lane line, community, airport, etc. to mark all sorts of thermoplastic lines that are reflective such as straight line, dotted line, curve, oriented arrow, and letters.

Marking width: It is fit for marking 50/80/100/120/150/180/200/230/250/300/400/450 mm width thermoplastic lines and we can also custom-built any sizes of Dies for marking any other width thermoplastic lines according to your requirements.

Rear wheel locating pin: It is the directing device located at rear wheel, and can adjust the direction easily and precisely to ensure the road marking machine freely operated in straight or twist.

Adiabatic Paint tank: The paint tank is made of stainless steel and cold rolling oxidation resistant steel, which is equipped with erect type hand stirring device. The temperature of liquid thermoplastic paint can be kept by the fire under the paint tank.

Glass beads box: Steel cover can be opened easily to check the quantity of reflective glass beads timely.

Glass beads dispenser: The automatic glass beads dispenser synchronous with road marking system, ensures the dispenser more even and more economical. It has the characteristics of advanced, compact, flexible, and easy operation. The spreading width of the glass beads dispenser can be adjusted from 0 to 200 mm according to your requirements. Any other sizes more than 200 mm glass beads dispenser need to be custom-built accordingly.  

Chassis: The firm welding frame, whose surface has been electrostatic sprayed and high temperature treated, is equipped with high quality imported bearing to ensure the whole machine more lightsome and convenient.

Dies: The structure plate is made of imported special steel with fire resistance (2000ºC), oxidation resistance and deformation resistance, which has better stability after being punched. The base is made of special alloy steel and adopts the pneumatic screeding structure. The floor blade is made of original imported hard tungsten steel, and the die's body adopts aluminum die-casting. The high manufacture techniques ensure dies easy operation, moving steadily, high efficiency, even marking thickness, neat marking line, durability and firmness.

Main Technical Specifications
 
2. ) RS11 Booster Vehicle

It can be connected with RS-1A and RS-1B Hand Push Thermoplastic Road Marking Machine, so that you can drive the machine for road marking, will save the manpower and enhance the working efficiency greatly.
 
Simple Specifications:
1.    Max. Climbing Angle: 60°
2.    Size: 1500*1200*700 mm
3.    Net weight: 80 kg
4.    Engine: 5.5 HP American Engine
 
Operation Steps:
1.    Start the engine, connect the towing hook.
2.    Release the brake.
3.    Press the treadle forward, then it will move forward, deeper press the treadle forward, faster moving speed forward; Press the treadle backward, then it will move backward, deeper press the treadle backward, faster moving speed backward.

3. ) RS2 Self-propelled Thermoplastic Road Marking Machine

The Self-propelled Thermoplastic Road Marking Machine is a new generation Thermoplastic Road Marking Machine and is special-purpose equipment for thermoplastic road marking. It is used for reflective marking of straight line, dotted line, curve, oriented arrow, and letters in highway and urban road.

Driving system: The driving system of this machine adopts imported hydraulic pressure stepless speed regulation device, which has automatic brake device flexible operated in forward, back off and stop. When marking a line, ideal moving speed can be adjusted only by operating the velocity modulation handle, and going forward or backward can be adjusted at any time. It guarantees the road marking quality and the speed, the flexible operation reduces the labor intensity and enhances the working efficiency.

Marking width: It is fit for marking 50/80/100/120/150/180/200/230/250/300/400/450 mm width thermoplastic lines and we can also custom-built any sizes of Dies for marking any other width thermoplastic lines according to your requirements.
Rear wheel locating pin: It is the directing device located at rear wheel, can adjust the direction easily and precisely to ensure the road marking machine operated freely in straight or twist.

Adiabatic Paint tank: The paint tank is made of stainless steel and cold rolling oxidation resistant steel, which is equipped with erect type hand stirring device. The temperature of liquid thermoplastic paint can be kept by the fire under the paint tank.

Glass beads box: Steel cover can be opened easily to check the quantity of reflective glass beads timely.

Glass beads dispenser: The automatic glass beads dispenser synchronous with road marking system, ensures the dispenser more even and more economical. It has the characteristics of advanced, compact, flexible, and easy operation. The spreading width of the glass beads dispenser can be adjusted from 0 to 200 mm according to your requirements. Any other sizes more than 200 mm glass beads dispenser need to be custom-built accordingly.

Engine: HONDA GS5.5 HP four-stroke air-cooled gasoline Engine with liquefied gas starter.

Chassis: The firm welding frame, whose surface has been electrostatic sprayed and high temperature treated, is equipped with high quality imported bearing to ensure the whole machine more lightsome and convenient.

Dies: The structure plate is made of imported special steel with fire resistance (2000ºC), oxidation resistance and deformation resistance, which has better stability after being punched. The base is made of special alloy steel and adopts the pneumatic screeding structure. The floor blade is made of original imported hard tungsten steel, and the die's body adopts aluminum die-casting. The high manufacture techniques ensure dies easy operation, moving steadily, high efficiency, even marking thickness, neat marking line, durability and firmness.
 
Main Technical Specifications
 
4. ) RS-4A & RS-4B Hydraulic Thermoplastic Paint Preheater

Hydraulic Thermoplastic Paint Preheater adopts the heating method of liquefied gas combustion system. When heating thermoplastic paint, the speed of mixing blade is even. The Preheater is fully enclosed with heat retaining cotton so that the inner of the tank has a good heat retaining character.
Hydraulic Double Tanks Thermoplastic Paint Preheater is consisted of the dynamic transmission system, preheater body, preheater assembly, stirring device, feed gate, draining gate, gas combustion system, etc. The machine is reasonable in structure and its performance is better than similar equipments. Its operating system is centralized and easy to be operated with infinite speed variation of stirring. The two tanks can operate independently with a smooth transmission, low noise and high thermal efficiency, which can supply enough liquid thermoplastic paint for two hand push thermoplastic marking machines. It is the ideal equipment for thermoplastic paint heating and melting with good double-layer insulating property and even speed of stirring.
Hydraulic Single Tank Thermoplastic Paint Preheater has almost the same characteristics as Double Tanks Thermoplastic Paint Preheater.

Dynamic transmission system: The diesel is connected with the hydraulic pump through the clutch. The hydraulic multiway valve controls the hydraulic motor so that the stirring shaft is driven to rotate and stir thermoplastic paint evenly. The stirring shaft's rotational speed is adjusted by the throttle valve. Working pressure in the hydraulic system is adjusted by the overflow valve of the multiway selector valve. The pressure gauge indicates the pressure value.

Multiway selector valve: The two function levers control the two hydraulic motor. The left function lever controls the left motor and the right function level controls the right motor. The heat retaining cotton is filled in the interlayer between inner and outer plate of the tank body to reduce heat loss.

Gas combustion system: The fuel gas pipe connection on the rear side of the preheater is joined up with the medium pressure valve of the liquefied petroleum gas tank (self-prepared by users). The gas pressure may be shown by the left and right pressure gauges in the front of the preheater. The machine is equipped with an igniting gun to ignite the stove. The temperature gauge on the cover of preheater displays the temperature value of the inner tank. Electrical starting diesel engine, 12V of vehicle accumulator, positive pole(+) jointing the accumulator, negative pole (-) jointing earth.

Stirring: Diesel drives stirrer to rotate clockwise and counterclockwise by hydraulic pump, dual control valve, overflow valve and hydraulic motor.
 
Main Technical Specifications
 
 
 
 
5. ) RS-4C & RS-4D Mechanical Thermoplastic Paint Preheater

RS-4C-600 Mechanical Double Tanks Thermoplastic Paint Preheater adopts mechanical driving method and imported energy efficient burner with four ring fire. It has medium capacity paint tank, with characters of reliable performance, high efficiency in melting thermoplastic paint, simple operation and easy maintenance.
 
RS-4D-300 Mechanical Single Tank Thermoplastic Paint Preheater is derived from Mechanical Double Tanks Thermoplastic Kettle, which has the characters of light weight, small size, easy for transportation, low price, etc. It is applied to some small projects in parking area, residential area, industrial plant, wharf, etc.
 
 
 
6. ) RS8 High Pressure Road Cleaning Machine

The gasoline engine of the machine drives the steel brush rotation and polish, doing the cleaning work. It is mainly applied to clean the laintance, mud, surface dust and cold paint line on the road. The regulator is used to regulate the high,middle,low (three level) cleaning strength according to working requirement.
This machine can enhance the adhesive force between the road line and the ground, greatly improve the efficiency of cleaning work before road marking. This machine is one necessary machine for high grade road.
 
Main Technical Specifications

7. ) RS7 High Pressure Road Air Blower

This machine is the auxiliary equipment for thermoplastic and cold paint road marking projects. It is mainly applied to the cleaning work before road marking construction. It adopts gasoline engine as the power and make the high pressure impeller of blower rotate and form very strong wind pressure, which clean the dust and impurities on the road. The blower is equipped with primer barrel rack, can finish the clearning and painting the primer at the same time, which can save time and energy and enhance the work efficiency. It is often matched with the Road Cleaning Machine for working.
 
Main Technical Specifications
 
8. ) RS10 Waterline Pre-marking Machine

1. It can mark three benchmark water line at the same time, but firstly you have to have one benchmark line for this machine, which is marked by manual.
2. Max. Width: 9 m
3. Size: 1300×900×1000 mm
4. Net weight: 128 kg
 
9. ) RS9 Primer Machine

The primer is used as adhesive material for thermoplastic paint road markings. The primer can avoid the thermoplastic road line peel off and strengthen the adhesive force between the thermoplastic road line and the road surface. Primer machine is the auxiliary equipment for thermoplastic paint road markings. It adopts the gasoline engine as its power, working together with the automatic air compressor to spray, which improves the working efficiency, reduces the intensity of labor. It will not bring any noise or pollution. The guide bar of the spraying gun rack can be adjusted up and down, in order to adjust the spraying width accurately and conveniently. The machine is easy to operate and maintain, moreover, its service life is long.
 
Main Technical Specifications
 
10. ) RS-6B Thermoplastic Road Marking Remover

RS-6B Road Marking Remover is professional equipment applicable to remove the original old road lines for the purpose of repairing and renewing the thermoplastic and cold plastic marking line. The machine has the features of strong power, high speed, easy and safe operation, low vibration and noise and dustproof, which can meet all your requirements of removing old marking lines.
 
Main Technical Specification

11. ) Thermoplastic Paint

Thermoplastic Road Marking Paint consists of a light colored aggregate (silica sand), white pigment (titanium dioxide), glass beads, binders, filler material (calcium carbonate), EVA and they are all held together with a thermoplastic resin. Thermoplastic Paint is a long service life road marking material which is solid powder condition with good stability in storage under normal temperature. Dry thermoplastic paint is heated in a Thermoplastic Paint Preheater with a temperature of 180~220ºC and agitated continuously until a liquid condition is achieved, then transferring the liquid thermoplastic paint into a paint tank of thermoplastic road marking machine for road marking. The liquid thermoplastic paint will be marked onto the road surface and form thermoplastic lines. When the temperature of liquid thermoplasitc lines is cooled to normal condition, the thermoplastic lines will turn into hard with a good wear resistance and pressure resistance.
Thanks to durability and long lasting reflectivity of thermoplastic paint, it is widely applied in highway and road. We are capable of formulating and supplying different standard thermoplastic paint for our customer, in accordance with the retroreflective requirements, application condition and climate variation specified by our customers. When properly formulated and correctly applied, thermoplastic paint should last in excess of five years under normal traffic conditions.
 
Main Features
1. High usage ratio: this thermoplastic paint has smaller density, more volume and bigger marking area, comparing with the similar products of competitors in China.
2. Strong crack resistance: to prevent our thermoplastic lines away from deformation and crack, we added some special agents such as high temperature resistance lipid materials and functional structural materials, solved this problem completely.
3. Adhesivity: Unique formulation ensures good adhesion of our thermoplastic paint with the road surface. Before road marking, coating some ROADSKY primer on the cement road and old asphalt road, which will make the thermoplastic paint adhere onto the road strongly. Normally, it will take 0.15 kg primer per square meter thermoplastic road lines.
4. Slip resistance: Containing anti-slip agent, good leveling property and anti-slip performance, maximum to guarantee the driving safety.
5. Reflective: Enough quantity and high quality coated glass beads with good refractive index are contained in the thermoplastic paint. Scientifically choose mixed glass beads with different particles according to the glass beads' sedimentation rate in thermoplastic paint to ensure the good reflective effect no matter the thermoplastic road line is new or old.
6. Fast drying: Thermoplastic paints with different formulations are provided according to the temperature, humidity and road conditions in different countries, which ensure the thermoplastic paint with excellent drying speed and good stain resistance. 
7. Stability in color: Adopting the raw materials with excellent light and thermal stability. The thermoplastic road lines will have original color and luster for a long time under the strong sunshine areas because of the anti-ultraviolet agent is added into the thermoplastic paint. Wet night visibility is enhanced too.
 
Color of Thermoplastic Paint
White and Yellow, other colors are also available according to your needing.
 
Packaging
25kg per bag, 40bags per pallet.
 
Storage
Store under cover in a dry, cool, ventilation area, protected from moisture. Stock should be replaced and used within 12 months from the date of manufacturing.
 
Transportation
Thermoplastic Road Marking Paint is not classed as dangerous goods by Chinese Testing and Technical Center, either the dangerous goods and packing by Road or Railway or Ocean.
 
Thickness of Thermoplastic Road Lines and Application of Glass Beads:
The different thickness of thermoplastic road lines will influence the glass beads retention and the wear resistance property of thermoplastic road lines. Normally it will take about 0.35 kilogram drop-on glass beads per square meter thermoplastic road lines. The retroreflectivity of glass beads will be the best when the thickness of thermoplastic road lines is 1.8 mm. ROADSKY standard Dies of Thermoplastic Road Marking Machines can mark 1.5-3 mm thickness thermoplastic road lines. Other thickness thermoplastic road lines can be custom-built if you need.
 
Using Proportion
 
Preparation before Thermoplastic Road Marking
The road surface to be painted must be dry and free of any grease, oil, dirt, gravel, dust 
and other related things. If the road has been previously marked or treated (such as the application of curing compounds with concrete), then a compatibility check should be carried out to confirm if the preparation is necessary. 
 
Caution
1)     The road working surface must be clean and dry. Above 0ºC is recommended.  
2)     The melting temperature shall be properly controlled at 180-220ºC and be kept for over 5 minutes.
3)     The melted liquid paint shall be mixed sufficiently before pouring out into the paint tank of road marking machine.
4)     The primer should be coated well on the road surface. After the primer is dry, then start to thermoplastic road marking. The cement road and old asphalt road should be coated with primer.  
5)     For the new constructed road, after three or more months or doing a special treatment it is recommended to start the paint work.
                                           
Our Production Lines
ROADSKY Thermoplastic Paints are made of high quality raw material, and its whole production processes are
finished by completely automatic production line, absolutely avoid quality defects caused by artificial operation,
such as large mixture ratio error, unstable quality, etc. and further make sure of high quality to customers.
 
Our Road Marking Teams
We have 8 road marking teams and a lot of thermoplastic road marking experience in China and the world. If you are a new comer in this industry, we can dispatch our 1-2 technicians to your country and assist you to finish your road marking projects. We can also dispatch our road marking team to your country and help you to finish your road marking project directly if you need. Any kind of cooperation is available to us.
 
We can supply AASHTO Standard Thermoplastic Paint, British Standard Thermoplastic Paint, China Standard Thermoplastic Paint etc. 

12. ) Reflective Glass Beads

1. Description
Glass Beads are tiny spheres of glass that used in road marking paint and durable road markings to reflect light back to the driver in dark or poor weather conditions - improving safety and visibility. The glass beads play a very important role in the road safety.
During daytime the white road markings gives the sufficient visibility as a contrast to the asphalt. In the night time contrast of the white line is not sufficient and must be improved by adding light reflective glass beads.
 
2. Technical specification
 
3.    Application
Intermix: This type glass beads are premixed in road marking materials on the ratio of 18-40% (weight percentage) before application.
Drop on: This type glass beads are dropped or sprayed onto the surface of liquid road lines during the road marking process. 
 
4.    Package
The Glass Beads are packed by double-deck plastic woven bag, 25 kg per bag. Normally 48 bags per pallet, total 20 pallets loaded into one 20' container.
1000-1200 kg big bag with double-deck package, the inner is polythene film and its thickness is not less than 0.5 mm. Normally 20 big bags loaded into one 20' container.
 
We can supply British Standard, AASHTO M247 Standard, China Standard JT/T446-2001, Australian Standard, European Standard, Korean Standard KSL2521 etc. 

14. )Primer for Thermoplastic Road marking Paint

The primer is also called as "under paint" or "bottom gel", which is a binder between thermoplastic road marking paint and road surface. The organic solvent in the primer can wet the road surface easily. while the organic solvent wet the road surface, the resin and elastomer in the primer cover the road surface, it is favorable for permeating the road surface and enhancing the adhesive strength between road marking paint and road surface. The main purpose of primer in the construction of thermoplastic road marking paint is to prevent the paint film peeling off and cracking.
Our primer for thermoplastic paint can meet the standards of BS3262, AASHTO, JT/T280-2004.
 
Features
1. Suitable for concrete and asphalt road
2. High adhesive
3. Quick drying
4. Easy application: by our primer machine or manual rolling brush
 
Attentions
1. Attention to fire safety, storage of dry and cool place
2. Do not Paint splash in the eyes and under the skin
3. Do not mix with the others under the Paint
4. The coating quantity is 150-200g / m2 and the color is amber.
 
How to mix the primer by yourself
1.    100 kg primer mixed by 1). Solid resin: 22 kg (this is not dangerous chemical, can buy from us); 2). Methylbenzene: 40 kg; 3). Acetic Ether: 38 kg.
2.    Other necessary tools
Stainless steel barrel and mixing stick
3.    Mixing method
Put the stainless steel barrel on ground to prevent electrostatic. Put the two liquid of methylbenzene and acetic ether into the barrel, then add the solid resin slowly during mixing. Solid resin can not be added too quickly, or the mixing liquid will be settled easily. Continue to mix till the liquid become into transparent liquid, then put the mixed liquid called primer into a clean barrel and sealed.