Essential Oil Purification Vacuum Distillation Short Path Molecular Distiller

• Garantie: 12 maanden
• Type: Destillatie apparatuur
• Object: Schoonheidsmiddel
• Operating Type: Continu Type
• Installatie: Verticale
• Destillatie Equipment Type: Moleculaire distillatie Equipment
• Model NR.: 150
• Extraction Tower Type: Draaitafel Tower
• Druk: Lagedruk
• Conditie: Nieuw
• model: ph-10
• bedrijfstemperatuur: tot 350 c.
• invoersnelheid l/u.: 50-120
• teamkarakter: max. -40 °c ~ -60 °c.
• perslucht (mpa): 0.5-0.65
• verdampingsgebied m2: 1
• ontvangstmethode: continue perspomp
• hoogte van de apparatuur (mm): 3000
• volume: 100
• systeemdruk: -0,085mpa
• verdampingscapaciteit (kg/u): 50
• vacuümniveau (mbar): laag tot 0.001 mbar
• invoermethode: zeer nauwkeurige tandwielpomp
• max. toerental (tpm): 50-350
• Transportpakket: Standard Wooden Exported Case
• Specificatie: 2000*800*2200mm
• Handelsmerk: PHARMA
• Oorsprong: Jiangsu
• Gs-Code: 3101001100
• Productiecapaciteit: 100

Beschrijving

Features:
1. The distillation temperature is low, molecular distillation is operated at a temperature far below the boiling point, and the separation purpose can be achieved as long as there is a temperature difference, which is the essential difference between molecular distillation and conventional distillation.
2. The distillation vacuum is high, and the molecular distillation device can obtain a high vacuum inside, usually the molecular distillation is operated at a very low pressure, so the material is not easy to be oxidized and damaged.
3. Thin film of distilled liquid, high heat transfer efficiency.
4. The heating time of the material is short, and the distance between the heated liquid surface and the condensing surface is less than the average free path of the light molecules, so the light molecules escaping from the liquid surface almost reach the condensing surface without collision. Therefore, the distillation material is heated for a short time, and the residence time at the distillation temperature is generally between a few seconds and tens of seconds, which reduces the opportunity of thermal decomposition of the material.

Model	PH-01	PH-02	PH-05	PH-10	PH-15	PH-20	PH-30	PH-50
Evaporation Area m2	0.1	0.25	0.5	1	1.5	2	3	5
Feeding Rate L/h	1-15	5-25	10-60	50-120	60-180	100-200	100-300	200-500
Feeding Method	High-precision gear pump
Receiving Method	Continuous discharge pump
Equipment Height(mm)	2000	2200	2500	3000	3100	3200	3300	3400
Max Speed(rpm)	50-350
Operation Temperature	Up to 350C
Vacuum Level(mbar)	Low to 0.001 mbar
Collection Mode	Gear pump for automatic and continuous feeding