Basis Informatie.
Outer Dimension
Kleine en middelgrote (60-115mm)
Bolvormig
Niet-uitlijnen Lagers
Load Richting
Lager To The Heart
Dynamic Load Rating
43.6(Kn)
Static Load Rating
41.7(Kn)
Grease Lubrication Speed Limit
6300(R/Min)
Lubricating Speed Limit
7800(R/Min)
Transportpakket
Plastic Barrel, Carton, Tray
Oorsprong
Jiangsu Zhenjiang
Beschrijving
Angular contact bearings concept
Single row angular contact ball bearings can withstand a direction of axial load, radial load, will cause additional axial force. And the only limit in one direction of the axial displacement of shaft or housing. Angular contact ball bearing contact angle of 40 degrees, it can withstand a lot of axial load. Angular contact ball bearings are non-separable design, the shoulder on both sides of the inner and outer rings uneven. In order to increase the load bearing capacity, which would lower the shoulder side machined, so that the ball bearings can be put more.
Double row angular contact ball bearings can withstand greater radial load mainly radial and axial joint load and moment load, axial displacement limit both axes. Mainly used to limit the shaft and housing bi-axial displacement of parts in a double row angular contact ball bearings, the outer ring may be inclined is limited, depending on the angle of inclination to allow the bearing internal clearance, bearing size, internal design and acting forces and moments on the bearings, which should ensure that the maximum permissible tilt angle of the bearing will not generate excessive additional stress. If the bearing inner and outer ring between the angle of inclination, will affect the life of the bearing, also causing the bearing running accuracy decreased operating noise increases. Double row angular contact ball bearings generally use nylon cage or solid brass cage. When the double row angular contact ball bearing installation should be noted that although two-way bearings can withstand axial load, but if one side of the ball gap, it should be careful not to let the main axial load through the notched side of the gutter. Should pay attention to the bearings in the side without the ball gap raceway bear the main load.
Product Description
Name: | Single Row Angular Contact with Bakelite Holder Bearing,Factory Products(7015AC) |
Size: | 75*115*20 |
Material: | Stainless Steel /Bearing steel |
Precision : | P6,P0 |
Application: | Machine tool spindles, high frequency motors, gas turbines, centrifuges, small car front wheel |
Packge: | 1) Single box + outer carton 2) Tube package + outer carton 3)According to customer request |
Service: | 1)OEM 2)After-Sales Service 3)24 hours service 4)sample is free |
Payment Term: | 1)T/T : 30% deposit , 70% before shippment. 2) L/C at sight. (high bank charge, not suggest , but acceptable ) 3)100% Western Union in advance. (specially for air shipment or small amount) |
Angular contact bearings size table
Bearing NO. | Principal dimensions | Speed ratings(r/min) | Basic load ratings | (kg) |
d | D | B / C / T | Grease | Oil | Dynamic(kN) | Static(kN) | Mass |
7000AC | 10 | 26 | 8 | 5 | 2.35 | 34000 | 42000 | 0.021 |
7000C | 10 | 26 | 8 | 5.3 | 2.45 | 47000 | 62000 | 0.021 |
7001AC | 12 | 28 | 8 | 5.4 | 2.75 | 29000 | 37000 | 0.024 |
7001C | 12 | 28 | 8 | 5.8 | 2.95 | 40000 | 54000 | 0.024 |
7002AC | 15 | 32 | 9 | 6.1 | 3.45 | 26000 | 32000 | 0.035 |
7002C | 15 | 32 | 9 | 6.6 | 3.7 | 35000 | 47000 | 0.035 |
7003AC | 17 | 35 | 10 | 6.75 | 4.15 | 23000 | 28000 | 0.045 |
7003C | 17 | 35 | 10 | 7.3 | 4.45 | 31000 | 41000 | 0.045 |
7004AC | 20 | 42 | 12 | 10.3 | 6.1 | 19000 | 24000 | 0.079 |
7004C | 20 | 42 | 12 | 11.1 | 6.6 | 26000 | 35000 | 0.079 |
7005AC | 25 | 47 | 12 | 11.3 | 7.4 | 17000 | 21000 | 0.091 |
7005C | 25 | 47 | 12 | 12.3 | 8 | 23000 | 30000 | 0.091 |
7006AC | 30 | 55 | 13 | 14.5 | 10.1 | 14000 | 18000 | 0.133 |
7006C | 30 | 55 | 13 | 15.8 | 11 | 20000 | 26000 | 0.133 |
7007AC | 35 | 62 | 14 | 17.5 | 12.6 | 12000 | 15000 | 0.17 |
7007C | 35 | 62 | 14 | 19.1 | 13.7 | 17000 | 22000 | 0.17 |
7008AC | 40 | 68 | 15 | 18.7 | 14.6 | 11000 | 14000 | 0.21 |
7008C | 40 | 68 | 15 | 20.5 | 15.9 | 15000 | 20000 | 0.21 |
7009AC | 45 | 75 | 16 | 22.2 | 17.7 | 10000 | 12000 | 0.26 |
7009C | 45 | 75 | 16 | 24.4 | 19.3 | 14000 | 18000 | 0.26 |
7010AC | 50 | 80 | 16 | 23.6 | 20.1 | 9200 | 11000 | 0.29 |
7010C | 50 | 80 | 16 | 26 | 21.9 | 13000 | 17000 | 0.29 |
7011AC | 55 | 90 | 18 | 31.1 | 26.3 | 8300 | 10000 | 0.42 |
7011C | 55 | 90 | 18 | 34.1 | 28.6 | 11000 | 15000 | 0.42 |
7012AC | 60 | 95 | 18 | 31.9 | 28.1 | 7700 | 9700 | 0.45 |
7012C | 60 | 95 | 18 | 35 | 30.6 | 11000 | 14000 | 0.45 |
7013AC | 65 | 100 | 18 | 33.7 | 31.4 | 7200 | 9000 | 0.47 |
7013C | 65 | 100 | 18 | 37.1 | 34.3 | 10000 | 13000 | 0.47 |
7014AC | 70 | 110 | 20 | 42.7 | 39.4 | 6600 | 8300 | 0.66 |
7014C | 70 | 110 | 20 | 46.9 | 43 | 9200 | 12000 | 0.66 |
7015AC | 75 | 115 | 20 | 43.6 | 41.7 | 6300 | 7800 | 0.69 |
7015C | 75 | 115 | 20 | 48 | 45.6 | 8700 | 11000 | 0.69 |
7016AC | 80 | 125 | 22 | 53.4 | 50.6 | 5800 | 7200 | 0.93 |
7016C | 80 | 125 | 22 | 58.7 | 55.3 | 8000 | 11000 | 0.93 |
7017AC | 85 | 130 | 22 | 54.6 | 53.7 | 5500 | 6800 | 0.97 |
7017C | 85 | 130 | 22 | 60.1 | 58.7 | 7600 | 10000 | 0.97 |
7018AC | 90 | 140 | 24 | 65.2 | 63.3 | 5100 | 6400 | 1.26 |
7018C | 90 | 140 | 24 | 71.7 | 69.1 | 7100 | 9400 | 1.26 |
7200AC | 10 | 30 | 9 | 4.65 | 2.2 | 29000 | 37000 | 0.031 |
7200C | 10 | 30 | 9 | 5 | 2.35 | 40000 | 54000 | 0.031 |
7201AC | 12 | 32 | 10 | 7.45 | 3.65 | 27000 | 34000 | 0.038 |
7201C | 12 | 32 | 10 | 7.9 | 3.85 | 38000 | 50000 | 0.038 |
7202AC | 15 | 35 | 11 | 8.1 | 4.25 | 24000 | 29000 | 0.048 |
7202C | 15 | 35 | 11 | 8065 | 4.55 | 33000 | 43000 | 0.048 |
7203AC | 17 | 40 | 12 | 10.2 | 5.5 | 21000 | 26000 | 0.07 |
7203C | 17 | 40 | 12 | 10.9 | 5.9 | 29000 | 38000 | 0.07 |
7204AC | 20 | 47 | 14 | 14.5 | 8.4 | 17000 | 22000 | 0.112 |
7204B | 20 | 47 | 14 | 13.3 | 7.7 | 13000 | 17000 | 0.112 |
7204C | 20 | 47 | 14 | 15.5 | 9 | 24000 | 32000 | 0.112 |
7205AC | 25 | 52 | 15 | 15.3 | 9.5 | 15000 | 19000 | 0.135 |
7205B | 25 | 52 | 15 | 14 | 8.7 | 12000 | 15000 | 0.135 |
7205C | 25 | 52 | 15 | 16.6 | 10.2 | 21000 | 28000 | 0.135 |
7206AC | 30 | 62 | 16 | 21.3 | 13.7 | 13000 | 16000 | 0.208 |
7206B | 30 | 62 | 16 | 19.4 | 12.5 | 9600 | 13000 | 0.208 |
7206C | 30 | 62 | 16 | 23 | 14.7 | 18000 | 24000 | 0.208 |
7207AC | 35 | 72 | 17 | 28.1 | 18.6 | 11000 | 14000 | 0.295 |
7207B | 35 | 72 | 17 | 25.6 | 17 | 8300 | 11000 | 0.295 |
7207C | 35 | 72 | 17 | 30.4 | 20.1 | 15000 | 20000 | 0.295 |
7208AC | 40 | 80 | 18 | 33.6 | 23.3 | 10000 | 12000 | 0.382 |
7208B | 40 | 80 | 18 | 30.6 | 21.3 | 7500 | 10000 | 0.382 |
7208C | 40 | 80 | 18 | 36.4 | 25.2 | 14000 | 18000 | 0.382 |
7209AC | 45 | 85 | 19 | 37.7 | 26.6 | 9400 | 12000 | 0.43 |
7209B | 45 | 85 | 19 | 34.3 | 24.3 | 7000 | 9400 | 0.43 |
7209C | 45 | 85 | 19 | 40.8 | 28.7 | 13000 | 17000 | 0.43 |
7210AC | 50 | 90 | 20 | 39.4 | 41.3 | 8500 | 11000 | 0.485 |
7210B | 50 | 90 | 20 | 37.535.7 | 26.7 | 6400 | 8500 | 0.485 |
7210C | 50 | 90 | 20 | 42.8 | 31.8 | 12000 | 16000 | 0.485 |
7211AC | 55 | 100 | 21 | 48.7 | 37.1 | 7600 | 9500 | 0.635 |
7211B | 55 | 100 | 21 | 44.1 | 33.8 | 5700 | 7600 | 0.635 |
7211C | 55 | 100 | 21 | 52.9 | 40.2 | 11000 | 14000 | 0.635 |
7212AC | 60 | 110 | 22 | 58.9 | 45.7 | 6900 | 8600 | 0.82 |
7212B | 60 | 110 | 22 | 53.4 | 41.6 | 5100 | 6900 | 0.82 |
7212C | 60 | 110 | 22 | 64 | 49.5 | 9500 | 13000 | 0.82 |
7213AC | 65 | 120 | 23 | 67.3 | 54.2 | 6400 | 8000 | 1.02 |
7213B | 65 | 120 | 23 | 60.9 | 49.3 | 4800 | 6400 | 1.02 |
7213C | 65 | 120 | 23 | 73.1 | 58.7 | 8900 | 12000 | 1.02 |
7214AC | 70 | 125 | 24 | 69.8 | 55.6 | 6100 | 7600 | 1.12 |
7214B | 70 | 125 | 24 | 63.2 | 50.6 | 4600 | 6100 | 1.12 |
7214C | 70 | 125 | 24 | 75.9 | 60.2 | 8400 | 11000 | 1.12 |
7215AC | 75 | 130 | 25 | 79.2 | 65.2 | 5800 | 7200 | 1.23 |
7215B | 75 | 130 | 25 | 71.7 | 59.3 | 4300 | 5800 | 1.23 |
7215C | 75 | 130 | 25 | 86.1 | 70.6 | 8000 | 11000 | 1.23 |
7216AC | 80 | 140 | 26 | 85.3 | 71.5 | 5400 | 6700 | 1.5 |
7216B | 80 | 140 | 26 | 77.1 | 65 | 4000 | 5400 | 1.5 |
7216C | 80 | 140 | 26 | 92.8 | 77.5 | 7500 | 9900 | 1.5 |
7217AC | 85 | 150 | 28 | 98.6 | 83.6 | 5000 | 6300 | 1.87 |
7217B | 85 | 150 | 28 | 89.2 | 76 | 3800 | 5000 | 1.87 |
7217C | 85 | 150 | 28 | 107 | 90.6 | 7000 | 9200 | 1.87 |
7218C | 90 | 160 | 30 | 123 | 105 | 6500 | 8600 | 2.3 |
7305B | 25 | 62 | 17 | 22.9 | 13.3 | 10000 | 14000 | 0.243 |
7306B | 30 | 72 | 19 | 27.6 | 17.4 | 8700 | 12000 | 0.362 |
7307B | 35 | 80 | 21 | 32.5 | 20.2 | 7700 | 10000 | 0.475 |
7308B | 40 | 90 | 23 | 39.7 | 25.2 | 6900 | 9200 | 0.657 |
7309B | 45 | 100 | 25 | 50.6 | 34.1 | 6200 | 8200 | 0.875 |
7310B | 50 | 110 | 27 | 64.4 | 44.3 | 5500 | 7300 | 1.14 |
7311B | 55 | 120 | 29 | 74.3 | 52 | 5000 | 6700 | 1.45 |
7312B | 60 | 130 | 31 | 84.9 | 60.3 | 4600 | 6200 | 1.81 |
7313B | 65 | 140 | 33 | 96.1 | 69.3 | 4300 | 5800 | 2.22 |
7314B | 70 | 150 | 35 | 108 | 78.9 | 4000 | 5400 | 2.7 |
7316B | 80 | 170 | 39 | 127 | 100 | 3500 | 4700 | 3.85 |
7317B | 85 | 180 | 41 | 137 | 112 | 3300 | 4400 | 4.53 |
7408B | 40 | 110 | 27 | 64.9 | 40.4 | 5200 | 7200 | 1.23 |
7410B | 50 | 130 | 31 | 90.2 | 60.4 | 4400 | 6000 | 1.92 |
7412B | 60 | 150 | 35 | 119 | 86.7 | 3700 | 5100 | 2.85 |
7408BM | 40 | 110 | 27 | - | - | - | - | 1.41 |
7416ACM | 80 | 200 | 48 | - | - | - | - | 7 |
Company Profile
ZhengJiang RUNWANG Bearing CO,.Ltd plant was built in 2010, it is located in the "Bearing town" reputation of Zhenjiang City, Jiangsu Province, the eastern outskirts of Xinfeng.It covers an area of about 1,500 square meters, has a group of highly qualified professionals and well-trained workforce.
We specialize in the production of professional and non-standard bearings, angular contact bearings, aligning ball bearings and deep groove ball bearings, bearing products are of high quality refined steel.
The factory has excellent production equipment, improve the quality control system and strong technical force.Products undergo strict process control and testing, in line with ISO9001 international standards.
Our products are mainly sold in Guangdong, Shandong, Jiangsu and Shanghai, the foreign sold well in Europe, North America and Southeast Asia and countries.
We warmly welcome customers from home and around the world to visit.Thank you.
Advantage
a.Compare with the trading company, as we have our own factory
b.Compare with the factory we are easy communicated.
c.Our products were produced under strict quality test system.
d.More than many years industry experience
e.Accept OEM, customization, customers' logo
f. Our engineers have more than 20 years of experience
j. We are worthy of an enquiry.
Adres:
Runwang Bearing Factory, Zhongtian Waihuan Road, Dantu District, Zhenjiang, Jiangsu, China
Soort bedrijf:
Fabrikant/fabriek
Zakelijk Bereik:
Ijzerwaren & Gereedschap, Industriële Apparaturen & Onderdelen, Produceren & Verwerken Machine
Bedrijfsintroductie:
ZhengJiang RUNWANG met CO, . Ltd fabriek werd gebouwd in 2010, is gelegen in de "dragende stad" reputatie van Zhenjiang City, Jiangsu Provincie, de oostelijke rand van Xinfeng. Het beslaat een oppervlakte van ongeveer 500 vierkante meter, heeft een groep hooggekwalificeerde professionals en goed opgeleide werknemers.
Wij zijn gespecialiseerd in de productie van professionele en niet-standaard lagers, hoekcontactlagers, het uitlijnen van kogellagers en diepgroefkogellagers, lagerproducten zijn van hoogwaardig geraffineerd staal.
De fabriek beschikt over uitstekende productieapparatuur, verbetert het kwaliteitscontrolesysteem en sterke technische krachten. Producten ondergaan strikte procescontrole en -tests, in overeenstemming met de internationale normen van ISO9001.
Onze producten worden voornamelijk verkocht in Guangdong, Shandong, Jiangsu en Shanghai, de buitenlandse producten worden goed verkocht in Europa, Noord-Amerika en Zuidoost-Azië en landen.
We verwelkomen klanten van thuis en over de hele wereld van harte om te bezoeken. Dank u.