Toepassing: | Bouw, Ondergronds, Industrieel, Centrale |
---|---|
Voltage: | Laag-en middenspanning Kabel |
Stroom: | AC Cable |
Isolatiemateriaal: | PVC |
Schede Materiaal: | PVC |
Materiaal Vorm: | Ronde Wire |
Leveranciers met geverifieerde zakelijke licenties
Deze kabels voor energiedistributie zijn geschikt voor alle soorten laagspanningsverbindingen van industrieel type, in stedelijke netwerken, bouwinstallaties, etc.
Bijzonder geschikt in gevallen van hoge bedrijfstemperatuur en wanneer hoge weerstand tegen zonnestraling en atmosferische agentia vereist is. Goede weerstand tegen lage temperaturen en chemische stoffen.
Kan worden gebruikt zonder extra mechanische bescherming in de open lucht, aan muren of in loopbanen, in loopbruggen, en in lege kabelconstructies in het algemeen. Kan ondergronds worden gelegd met mechanische bescherming die is opgebouwd uit platen, tegels of bakstenen.
Het wordt afgeraden deze kabel langer dan twee maanden per jaar onder water te leggen. Met de juiste mechanische bescherming kan het worden gebruikt in gebieden waar explosiegevaar bestaat, maar in dit geval wordt de toegestane stroombelasting met 15% verlaagd. Het kan worden gebruikt bij een omgevingstemperatuur tot -25°C.
Kabelconstructie
Flexibele elektrolytische gegloeid koperdraad |
Strengen volgens IEC 60228 klasse 2, make-up met fijne draden (Φ max. 0, 4mm) met een flexibiliteitsniveau dat gelijk is aan klasse 5 |
XLPE-isolatie conform NF C 32-321 |
Kleurcodes volgens NF C32-321 |
Niet vezelig en niet hygroscopisch vulmiddel |
Flexibele zwarte PVC-buitenmantel |
Bedrijfsspanning | 600/1000 volt |
Testspanning | 1200 volt |
Minimale buigradius | 6 x O |
Bedrijfstemperatuurbereik | -15°C tot 60°C. |
Kortsluiting | 250°C. |
Vlamvertragend | NF C 32-070 C2 |
Isolatieweerstand | 20 m x km |
AWG | Dwarsdoorsnede | Isolatiedikte | Minimale dikte van de mantel | Maximale totale diameter | Kabelgewicht ca. |
---|---|---|---|---|---|
mm2 | mm | mm | mm | kg/km | |
16 | 1 x 1, 5 | 0.7 | 1.09 | 6.6 | 45 |
14 | 1 x 2, 5 | 0.7 | 1.09 | 7 | 55 |
12 | 1x4 | 0.7 | 1.09 | 7.6 | 75 |
10 | 1x6 | 0.7 | 1.09 | 8.2 | 100 |
8 | 1 x 10 | 0.7 | 1.09 | 9.2 | 140 |
6 | 1 x 16 | 0.7 | 1.09 | 10.5 | 205 |
4 | 1x25 | 0.9 | 1.09 | 12.5 | 315 |
2 | 1x35 | 0.9 | 1.09 | 13.5 | 400 |
1 | 1x50 | 1 | 1.09 | 15 | 530 |
2/0 | 1 x 70 | 1.1 | 1.09 | 17 | 725 |
3/0 | 1x95 | 1.1 | 1.18 | 19 | 985 |
4/0 | 1 x 120 | 1.2 | 1.18 | 21 | 1260 |
300 MCM | 1x150 | 1.4 | 1.26 | 23 | 1520 |
500 MCM | 1x185 | 1.6 | 1.26 | 25.5 | 1940 |
750 MCM | 1 x 240 | 1.7 | 1.35 | 28.5 | 2310 |
1 x 300 | 1.8 | 1.43 | 31 | 3200 | |
16 | 2 x 1, 5 | 0.7 | 1.43 | 10.5 | 115 |
14 | 2 x 2, 5 | 0.7 | 1.43 | 11.5 | 145 |
12 | 2 x 4 | 0.7 | 1.43 | 13 | 195 |
10 | 2x6 | 0.7 | 1.43 | 14 | 265 |
8 | 2 x 10 | 0.7 | 1.43 | 16 | 390 |
6 | 2 x 16 | 0.7 | 1.43 | 18.5 | 560 |
4 | 2 x 25 | 0.9 | 1.43 | 22 | 850 |
2 | 2 x 35 | 0.9 | 1.43 | 24.5 | 1080 |
16 | 3 x 1, 5 | 0.7 | 1.43 | 11 | 130 |
14 | 3 x 2, 5 | 0.7 | 1.43 | 12.5 | 170 |
12 | 3 x 4 | 0.7 | 1.43 | 13.5 | 230 |
10 | 3x6 | 0.7 | 1.43 | 15 | 325 |
8 | 3x10 | 0.7 | 1.43 | 17 | 485 |
6 | 3 x 16 | 0.7 | 1.43 | 19.5 | 705 |
4 | 3 x 25 | 0.9 | 1.43 | 23.5 | 1080 |
2 | 3x35 | 0.9 | 1.43 | 26 | 1390 |
1 | 3 x 50 | 1 | 1.43 | 29 | 1840 |
2/0 | 3 x 70 | 1.1 | 1.52 | 34 | 2540 |
3/0 | 3x95 | 1.1 | 1.6 | 38.5 | 3430 |
4/0 | 3 x 120 | 1.2 | 1.69 | 42.5 | 4440 |
300 MCM | 3 x 150 | 1.4 | 1.86 | 47.5 | 5380 |
500 MCM | 3 x 185 | 1.6 | 1.94 | 53 | 6920 |
750 MCM | 3 x 240 | 1.7 | 2.11 | 59.5 | 8420 |
- | 3 x 300 | 1.8 | 2.28 | 66 | 11300 |
16 | 4 x 1, 5 | 0.7 | 1.8 | 11.3 | 180 |
14 | 4 x 2, 5 cm. | 0.7 | 1.8 | 12.2 | 220 |
12 | 4x4 | 0.7 | 1.8 | 13.3 | 300 |
10 | 4 x 6 | 0.7 | 1.8 | 15 | 420 |
8 | 4 x 10 | 0.7 | 1.8 | 17.25 | 630 |
6 | 4 x 16 | 0.7 | 1.8 | 18.8 | 900 |
4 | 4 x 25 | 0.9 | 1.8 | 23 | 1350 |
2 | 4x35 | 0.9 | 1.8 | 25.1 | 1750 |
1 | 4x50 | 1 | 1.9 | 29.1 | 2350 |
2/0 | 4x70 | 1.1 | 2 | 33.9 | 3400 |
3/0 | 4x95 | 1.1 | 2.1 | 38.4 | 4500 |
4/0 | 4x120 | 1.2 | 2.3 | 42.4 | 5700 |
300 MCM | 4x150 | 1.4 | 2.4 | 47.2 | 7050 |
500 MCM | 4x185 | 1.6 | 2.6 | 52.65 | 8700 |
750 MCM | 4 x 240 | 1.7 | 2.8 | 59 | 11400 |
- | 4 x 300 | 1.8 | 3 | 64.8 | 14200 |
1 | 3x50+35 | 1 | 1.8 | 28.8 | 2200 |
2/0 | 3x70+50 | 1.1 | 2 | 33.4 | 3100 |
3/0 | 3x95+50 | 1.1 | 2.1 | 37 | 3950 |
4/0 | 3x120+70 | 1.2 | 2.2 | 41.3 | 5050 |
300 MCM | 3x150+70 | 1.4 | 2.3 | 45.1 | 6100 |
500 MCM | 3x185+70 | 1.6 | 2.5 | 50 | 7400 |
750 MCM | 3x240+95 | 1.7 | 2.7 | 55.8 | 9700 |
16 | 5 x 1, 5 | 0.7 | 1.8 | 12.1 | 205 |
14 | 5 x 2, 5 | 0.7 | 1.8 | 13.1 | 260 |
12 | 5 x 4 | 0.7 | 1.8 | 14 | 350 |
10 | 5 x 6 | 0.7 | 1.8 | 16.3 | 500 |
8 | 5 x 10 | 0.7 | 1.8 | 18.5 | 760 |
6 | 5 x 16 | 0.7 | 1.8 | 20.6 | 1100 |
4 | 5 x 25 | 0.9 | 1.8 | 25.4 | 1600 |
16 | 7 x 1, 5 | 0.7 | 1.8 | 12.3 | 260 |
14 | 7 x 2, 5 | 0.7 | 1.8 | 13.2 | 330 |
12 | 7 x 4 | 0.7 | 1.8 | 15.4 | 450 |
16 | 8 x 1, 5 | 0.7 | 1.8 | 13.9 | 290 |
14 | 8x2, 5 | 0.7 | 1.8 | 14.9 | 380 |
12 | 8 x 4 | 0.7 | 1.8 | 16.5 | 520 |
16 | 10 x 1, 5 | 0.7 | 1.8 | 15.8 | 350 |
14 | 10 x 2, 5 | 0.7 | 1.8 | 17 | 450 |
12 | 10x4 | 0.7 | 1.8 | 19 | 630 |
16 | 12x1, 5 | 0.7 | 1.8 | 15.5 | 390 |
14 | 12x2, 5 | 0.7 | 1.8 | 16.8 | 510 |
12 | 12x4 | 0.7 | 1.8 | 19.6 | 700 |
16 | 14 x 1, 5 | 0.7 | 1.8 | 17 | 440 |
14 | 14 x 2, 5 | 0.7 | 1.8 | 18.3 | 580 |
12 | 14 x 4 | 0.7 | 1.8 | 20.5 | 800 |
16 | 19x1, 5 | 0.7 | 1.8 | 17.9 | 550 |
14 | 19x2, 5 | 0.7 | 1.8 | 19.4 | 740 |
12 | 19 x 4 | 0.7 | 1.8 | 22.6 | 1050 |
16 | 24 x 1, 5 | 0.7 | 1.8 | 20.7 | 670 |
14 | 24 x 2, 5 | 0.7 | 1.8 | 23.2 | 900 |
16 | 30x1, 5 | 0.7 | 1.8 | 22.6 | 800 |
14 | 30x2, 5 | 0.7 | 1.8 | 24.5 | 1100 |
16 | 37 x 1, 5 | 0.7 | 1.8 | 23.5 | 950 |
14 | 37 x 2, 5 | 0.7 | 1.8 | 26.3 | 1300 |
Verzending van verpakkingen
Elk probleem en onderzoek pls contact met Tina
Telefoon: +86-15737156317
Leveranciers met geverifieerde zakelijke licenties