Odak aw-3 Piezo het Pedaal van het Effect van de Gitaar Odak verbetert de JumboPedalen van de Gevolgen van de Gitaar

(1)Feature names and functions

1.Lights
The display effect is ON / OFF, lights when the effect is ON.

2.Output Interface
Output jacks can connect the device to an amplifier or output interface from other devices. This output interface can be connected directly to stereo headphones.

3.USB Interface / Power Interface
This interface can be connected to USB + 5V power supply (computers, mobile power supply, AC power adapter).

4.Input jack 
This jack accepts input signals (from a guitar or other instrument effects).

5.USB Interface / Power Interface
This interface function is the same as 3,it can also be + 5 V power supply port of the next odak effect device.

6.Digital Switch
This switch directly controls the ON/OFF of the effector.

7.Digital tube display
Select mode by the MODE selector
UP,DOWN,TRIGGER,TEMPO

8.DECAY attenuation knob
This knob is used to adjust the time change of wow sound, and clockwise rotating to improve the time of wow effects.

9.SENS knob
This knob is used to adjust the wow tone effect which is applied to the input level, and clockwise rotation makes more stronger wow effect.

10.MANUAL knob
The knob is used to adjust the frequency when the wow tone effect begins. 

11.Q knob
This knob is used to adjust the center frequency and the ratio of bandwidth. Turn it to right to move the central location to the position of high frequency, which makes wow sound more obvious.

12.MODE mode control knob
  Rotation mode and display in digital tube 
 1: UP mode
 2: DOWN mode
 3: TRIGGER mode
 4: TEMPO mode
AW-3: Guitar Amplifier

Standard input level: - 20dBu
Input impedance :470 MΩ
Standard output level :- 20 dBu
Output impedance :20Ω
Recommended load impedance :10 kΩ - 32Ω headphone
Control: Digital switch, Effect output control knob,Continuation of the sound control knob,
           Bass tone knob,Tenor tone knob,High frequency adjustment knob
Instruction:Effect ON/OFF- red light
Connector:Input and output interfaces, two USB, + 5V power supply interface
Power supply:+ 5v U S B
Current: + 5V 40 mA