Basis Informatie.
load Direction
radiaal lager
Stijl
Zonder Outer Ring, Zonder Inner Ring
Materiaal
Roestvrij staal
Beschrijving
Radiale naaldrollen en kooi
Net als bij model K, K D radiale naald- en houdermontage heeft dit type lager alleen een groep radiale naald- en houdermontage. Bij een kleine buitendiameter is deze geschikt voor de onderdelen, waar de radiale afmetingen speciaal beperkt zijn, die worden gebruikt voor het dragen van de radiale belasting. Model K---ZW, K---ZWD radiale naald- en houdermontage is de radiale naald- en houdermontage met dubbele rij. Wat dit soort lagers betreft, omdat het geen kraag heeft, worden het oppervlak van de tap en het oppervlak van het gat bij de behuizing direct als rollend oppervlak met oppervlakteruwheid HRC 60 en oppervlakteruwheid Ra niet meer dan 0.63 P m gedragen Om aan de eisen van de hoofdmachine te voldoen, kan dit type lager worden gemaakt in een gespleten lager, dat gemakkelijk kan worden gemonteerd. Model K…D staat voor als het gedeelde lager met één rij en model K--ZWD staat voor als tweevoudige rij gedeeld lager. (1-1) K radiale naaldrol en kooi met enkele rij (1-2) K...ZW dubbele rij radiale naaldrol en kooi (1-3) K... D gedeeltelijke éénrijige radiale naaldrol en kooi (1-4) K...ZWD dubbele rij radiale naaldrol en kooi Asdiameter | Aanduiding van lagers | Gewicht Ca | Grensafmetingen | Basisbelasting | Snelheid beperken |
Huidige code | Oorspronkelijke code | FW | EW | Wees | Dynamisch | Statisch | Olie |
mm | g | mm | N | tpm |
3 | K3 x 5 x 7TN | | 0.3 | 3 | 5 | 7 | 1.54 | 1.29 | 50000 |
K3 x 5 x 9TN | | 0.4 | 3 | 5 | 9 | 1.71 | 1.48 | |
K3 x 6 x 7 TN | | 0.4 | 3 | 6 | 7 | 1.43 | 0.97 | 47000 |
4 | K4 x 7 x 7 TN | | 0.5 | 4 | 7 | 7 | 2.33 | 1.84 | 43000 |
K4 x 7 x 10TN | | 0.7 | 4 | 7 | 10 | 2.35 | 1.92 | 39000 |
5 | K5 x 8 x 8 TN | 29241/5 | 0.7 | 5 | 8 | 8 | 2300 | 1880 | 37000 |
K5 x 8 x 10TN | 39241/5 | 0.9 | 5 | 8 | 10 | 2800 | 2450 | 37000 |
6 | K6 x 9 x 8TN | 29241/6 | 0.8 | 6 | 9 | 8 | 25600 | 2240 | 35000 |
K6 x 9 x 10TN | 39241/6 | 1 | 6 | 9 | 10 | 3300 | 3100 | 35000 |
K6 x 10 * 13TN | 19241/6 | 1.3 | 6 | 10 | 13 | 3500 | 2800 | 33000 |
7 | K7 x 10 x 8TN | 29241/7 | 0.9 | 7 | 10 | 8 | 2750 | 2550 | 32000 |
K7 x 10 x 10TN | 39241/7 | 1.1 | 7 | 10 | 10 | 3350 | 3400 | 32000 |
8 | K8 x 11 x 8TN | 29241/8 | 1.1 | 8 | 11 | 8 | 3000 | 2900 | 30000 |
K8 x 11 x 10TN | 39241/8 | 1.7 | 8 | 11 | 10 | 3830 | 3950 | 30000 |
K8 x 11 x 13TN | 49241/8 | 1.8 | 8 | 11 | 13 | 5000 | 5700 | 30000 |
K8 x 12 x 10TN | 29242/8 | 1.3 | 8 | 12 | 10 | 4900 | 4600 | 30000 |
9 | K9 x 12 x 10TN | 39241/9 | 1.5 | 9 | 12 | 10 | 4200 | 4700 | 30000 |
K9 x 12 x 13TN | 19241/9 | 1.9 | 9 | 12 | 13 | 5500 | 6700 | 30000 |
10 | K10 * 13 x 10TN | 39241/10 | 1.6 | 10 | 13 | 10 | 4500 | 5250 | 27000 |
K10 x 13 x 13 TN | 39241/10 | 2.1 | 10 | 13 | 13 | 6000 | 7600 | 27000 |
K10 x 13 x 16 TN | | 2.2 | 10 | 13 | 16 | 6300 | 7800 | 27000 |
K10 x 14 x 10TN | 29242/10 | 2.9 | 10 | 14 | 10 | 7000 | 7900 | 27000 |
K10 x 14 x 13 TN | 3922/10 | 4.3 | 10 | 14 | 13 | 8000 | 9100 | 26000 |
K10 x 16 x 12TN | 19244/10 | 3.7 | 10 | 16 | 12 | 7000 | 9300 | 27000 |
12 | K12 x 15 x 9TN | | 2.7 | 12 | 15 | 9 | 4120 | 5210 | 25000 |
K12 x 15 x 10TN | 39241/12 | 1.9 | 12 | 15 | 10 | 4320 | 5730 | 25000 |
K12 x 15 x 13 TN | 49241/12 | 2.4 | 12 | 15 | 13 | 6000 | 8100 | 25000 |
K12 x 16 x 8TN | 19242/12 | 2.9 | 12 | 16 | 8 | 1200 | 4700 | 25000 |
K12 x 16 x 10TN | 29242/12 | 3.4 | 12 | 16 | 10 | 6000 | 6900 | 25000 |
K12 x 16 x 13 TN | 39242/12 | 3.8 | 12 | 16 | 13 | 7900 | 9200 | 25000 |
K12 x 17 x 13 TN | 59242/12 | 4.4 | 12 | 17 | 13 | 9300 | 10000 | 24000 |
K12 x N8 x 12TN | 19244/12 | 5 | 12 | 18 | 12 | 9800 | 8000 | 24000 |
K12 x 15 x 20TN | K12 x 15 x 20TN | 3.8 | 12 | 15 | 20 | 8200 | 12000 | 25000 |
14 | K14 x N7 x 10 | | 4 | 14 | 17 | 10 | 5100 | 6800 | 23000 |
K14 x 17 x 17 | | 6.8 | 14 | 17 | 17 | 9300 | 14000 | 23000 |
K14 x N8 x 10 | 29242/14 | 4.8 | 14 | 18 | 10 | 6800 | 8300 | 23000 |
K14 x N8 * 13 | 39242/14 | 6.3 | 14 | 18 | 13 | 8100 | 9800 | 23000 |
K14 * 18 x 14 | | 6.8 | 14 | 18 | 14 | 9200 | 12000 | 23000 |
K14 x N8 * 15 | 49242/14 | 7.3 | 14 | 18 | 15 | 10000 | 13000 | 23000 |
As Diameter | Aanduiding van lagers | Gewicht Ca | Grensafmetingen | Basisbelasting | Snelheid beperken |
Huidige code | Oorspronkelijke code | FW | EW | Wees | Dynamisch | Statisch | Olie |
mm | g | mm | N | tpm |
25 | K25 x 32 x 16 | 19244/25 | 24.5 | 25 | 32 | 16 | 20500 | 27500 | 15000 |
K25 x 33 x 20 | 19245/25 | 32 | 25 | 33 | 20 | 28000 | 37500 | 15000 |
K25 x 33 x 24 | 29245/25 | 38.7 | 25 | 33 | 24 | 33900 | 46500 | 15000 |
K25 x 34 x 18 | | 32 | 25 | 34 | 18 | 48000 | 67000 | 15000 |
K25 x 35 x 30 | 39245/25 | 65.5 | 25 | 35 | 30 | 46500 | 61500 | 14000 |
K25 x 30 x 26 ZW | | 27 | 25 | 30 | 26 | 21000 | 35000 | 14000 |
26 | K26 x 30 x 10 | | 9 | 26 | 30 | 10 | 9500 | 15500 | 16000 |
K26 x 30 x 13 | | 11.4 | 26 | 30 | 13 | 11100 | 18700 | 16000 |
K26 x 30 x 17 | | 15 | 26 | 30 | 17 | 14700 | 27000 | 16000 |
K26 x 31 x 13 | | 9.9 | 26 | 31 | 13 | 12400 | 18400 | 15000 |
K26 x 30 x 22 | | 12.3 | 26 | 30 | 22 | 15200 | 28000 | 16000 |
27 | K27 x 32 x 17 | | 29 | 27 | 32 | 27 | 16000 | 34000 | 17000 |
28 | K28 x 32 x 16.5 | | 16 | 28 | 32 | 16.5 | 15000 | 32400 | 14000 |
K28 x 32 x 17 | 9242/28 | 18.2 | 28 | 32 | 17 | 15000 | 32400 | 14000 |
K28 x 33 x 13 | 29241/25 | 15.2 | 28 | 33 | 13 | 14800 | 23600 | 14000 |
K28 x 33 x 17 | 49241/28 | 19.5 | 28 | 33 | 17 | 19100 | 33000 | 14000 |
K28 x 33 x 27 TN | 79241/28 | 19 | 28 | 33 | 27 | 22800 | 40500 | 14000 |
K28 x 34 x 17 | 39242/28 | 24.2 | 28 | 34 | 17 | 21300 | 35000 | 14000 |
K28 x 35 x 16 | 19243/28 | 26 | 28 | 35 | 16 | 21000 | 29000 | 14000 |
K28 x 35 x 18 | | 31 | 28 | 35 | 18 | 23500 | 33500 | 14000 |
K28 x 35 x 20 | 29243/28 | 35 | 28 | 35 | 20 | 24000 | 34000 | 14000 |
K28 x 35 x 27 | | 47 | 28 | 35 | 27 | 34500 | 54500 | 14000 |
K28 x 36 x 16 | | 40 | 28 | 36 | 16 | 34000 | 47000 | 11000 |
K28 x 40 x 18 | | 50 | 28 | 40 | 18 | 33000 | 36500 | 12000 |
K28 x 40 x 25 | | 71 | 28 | 40 | 25 | 45000 | 54500 | 12000 |
30 | K30 x 33 x 10 | | | 30 | 33 | 10 | | | |
K30 x 34 x 13 | | 14.6 | 30 | 34 | 13 | 11800 | 21200 | 13000 |
K30 x 35 x 13 | 29241/30 | 16.3 | 30 | 35 | 13 | 15100 | 25000 | 13000 |
K30 x 35 x 17 | 49241/30 | 21.3 | 30 | 35 | 17 | 19100 | 33500 | 13000 |
K30 x 35 x 26 | | | 30 | 35 | 26 | | | |
K30 x 35 x 27 | 19241/30 | 33.3 | 30 | 35 | 27 | 30000 | 58500 | 13000 |
K30 x 37 x 16 | 19243/30 | 26.4 | 30 | 37 | 16 | 22500 | 33000 | 13000 |
K30 x 38 x 25 | 29244/30 | 43 | 30 | 38 | 25 | 16000 | 390000 | 13000 |
K30 x 39 x 21 | | | 30 | 39 | 21 | | | |
K30 x 40 x 18 | | 44 | 30 | 40 | 18 | 31500 | 39500 | 12000 |
K30 x 40 x 27 | 92401/30T | 60 | 30 | 40 | 27 | | | |
K30 x 40 x 30 | 49243/30 | 78 | 30 | 40 | 30 | 48500 | 68500 | 13000 |
K30 x 35 x 26 | | 32 | 30 | 35 | 26 | 23500 | 43500 | 12000 |
K30 x 42 x 44.1 | | | 30 | 42 | 44.1 | | | |
As Diameter | Aanduiding van lagers | Gewicht Ca | Grensafmetingen | Basisbelasting | Snelheid beperken |
Huidige code | Oorspronkelijke code | FW | EW | Wees | Dynamisch | Statisch | Olie |
mm | g | mm | N | tpm |
32 | K32 x 37 x 13 | 29241/32 | 18.3 | 32 | 37 | 13 | 15000 | 25000 | 12000 |
K32 x 37 x 17 | 49241/32 | 22.4 | 32 | 37 | 17 | 19400 | 35000 | 12000 |
K32 x 37 x 27 | 19241/32 | 36.7 | 32 | 37 | 27 | 29500 | 59500 | 12000 |
K32 x 37 x 28 TN | | 22.3 | 32 | 37 | 28 | 23100 | 43000 | 12000 |
K32 x 38 x 16 | | 25 | 32 | 38 | 16 | 21000 | 34000 | 12000 |
K32 x 38 x 20 | 49242/32 | 31 | 32 | 38 | 20 | 26000 | 44500 | 12000 |
K32 x 38 x 26 TN | | 25.2 | 32 | 38 | 26 | 27000 | 46500 | 12000 |
K32 x 39 x 16 | 19243/32 | 36.7 | 32 | 39 | 16 | 23500 | 35000 | 12000 |
K32 x 39 x 18 | | 37.2 | 32 | 39 | 18 | 26000 | 40500 | 12000 |
K32 x 40 x 20 | 19244/32 | 48 | 32 | 40 | 20 | 37000 | 40500 | 12000 |
K32 x 40 x 36 | | 73 | 32 | 40 | 36 | 53500 | 91500 | 12000 |
K32 x 46 x 32 | | 119 | 32 | 46 | 32 | 65500 | 82500 | 11000 |
K32 x 40 x 42 TN | | 771 | 32 | 40 | 42 | 49500 | 83500 | 12000 |
35 | K35 x 40 x 13 | 29241/35 | 188 | 35 | 40 | 13 | 15800 | 27500 | 11000 |
K35 x 40 x 17 | 49241/35 | 25.3 | 35 | 40 | 17 | 20300 | 38000 | 11000 |
K35 x 40 x 25 | 29244/35 | 31 | 35 | 40 | 25 | 29000 | 59500 | 11000 |
K35 x 40 x 27 TN | 19241/35 | 23.4 | 35 | 40 | 27 | 24500 | 48000 | 11000 |
K35 x 40 x 27 | 79241/35 | 28 | 35 | 40 | 27 | 27800 | 62100 | 11000 |
K35 x 40 x 30 | 39244/35 | 43 | 35 | 40 | 30 | 25000 | 49500 | 11000 |
K35 x 42 x 16 | 19243/35 | 34 | 35 | 42 | 16 | 23900 | 37000 | 11000 |
K35 x 42 x 18 | | 39.2 | 35 | 42 | 18 | 27000 | 42500 | 11000 |
K35 x 42 x 30 | 49243/35 | 62.4 | 35 | 42 | 30 | 38500 | 67500 | 11000 |
K35 x 43 x 18 | | 38 | 35 | 43 | 18 | 28000 | 41500 | 11000 |
K35 x 45 x 20 | | 55.5 | 35 | 45 | 20 | 36500 | 49500 | 10000 |
K35 x 45 x 30 | 29245/35 | 80 | 35 | 45 | 30 | 52500 | 78500 | 10000 |
K35 x 45 x 49 | | 120 | 35 | 45 | 49 | 81500 | 13400 | 10000 |
K35 x 40 x 30 ZW | | 48 | 35 | 40 | 30 | 31500 | 65500 | 11000 |
K35 x 42 x 20 ZW | 29243/35 | 41 | 35 | 42 | 20 | 29500 | 48500 | 11000 |
36 | K36 x 41 x 30 | | 52 | 36 | 41 | 30 | 23000 | 43000 | 11000 |
K36 x 42 x 16 | | 50 | 36 | 42 | 16 | 24000 | 42000 | 11000 |
37 | K37 x 42 x 17 | | 25.8 | 37 | 42 | 17 | 21900 | 42500 | 10000 |
K37 x 42 x 27 | | 40.7 | 37 | 42 | 27 | 31500 | 67500 | 10000 |
K37 x 45 x 26 | | 60.5 | 37 | 45 | 26 | 43500 | 73500 | 10000 |
38 | K38 x 43 x 17 | 49241/38 | 26.9 | 38 | 43 | 17 | 20000 | 38000 | 10000 |
K38 x 43 x 27 | 49241/38 | 43.2 | 38 | 43 | 27 | 31000 | 67500 | 10000 |
K38 x 46 x 20 | 19244/38 | 46 | 38 | 46 | 20 | 35000 | 56500 | 10000 |
K38 x 46 x 32 | | 72.7 | 38 | 46 | 32 | 54500 | 98500 | 10000 |
39 | K39 x 44 x 24 | | 38 | 39 | 44 | 24 | 28000 | 58500 | 10000 |
K39 x 44 x 26 ZW | | 29.5 | 39 | 44 | 26 | 27000 | 55500 | 10000 |
V1: Kan ik een gratis monster krijgen?
A1: Wij leveren gratis monsters in vracht verzameld. Voor speciale monsters kunt u contact met ons opnemen voor meer informatie.
V2: Hoe kan ik betalen?
A2: We geven de voorkeur aan T/T of L/C in zicht. Als u liever andere betalingsvoorwaarden hebt, kunt u vrijelijk contact met ons opnemen.
V3: Wat is uw merk en manier van verpakken? Kunt u mijn merk en verpakking produceren?
A3: Ons merk is SGC en onze eigen verpakkingsmaterialen. We kunnen uw merk maken. Voor meer informatie kunt u contact met ons opnemen.
V4: Wat is de levertijd?
A4: Dit is afhankelijk van de bestelhoeveelheden. De doorlooptijd van de massaproductie is ongeveer 45-60 dagen na ontvangst van de aanbetaling.
V5: Bent u fabrikant of handelsbedrijf?
A5: Wij zijn fabrikant en exporteur. Wij bieden allerlei OEM-diensten aan voor klanten over de hele wereld.
V6: Waar is uw belangrijkste markt?
A6: We exporteren naar Noord-Amerika, Mexico, Australië, Zuidoost-Azië, Europa, De Verenigde Arabische Emiraten, Turkije en andere landen.
Onze diensten
1. Professioneel QC- en QA-team om ervoor te zorgen dat alle producten vóór verzending gekwalificeerd zijn.
2. Concurrerende prijs.
3 .standaardpakket om veilig transport te garanderen.
4. Professionele service.
Waarom voor ons kiezen?
1. Productie
Gekwalificeerde productie, concurrerende prijs, professionele service.
2. Kwaliteit
Alle producten worden vóór verzending 100% geïnspecteerd door de betreffende testapparatuur.
Adres:
Heshu Village, Lijia Town, Wujin District, Changzhou, Jiangsu, China
Soort bedrijf:
Fabrikant/fabriek
Zakelijk Bereik:
Auto Parts, Consument Elektronica's, Diensten, Elektrotechniek & Elektronica's, Gezondheid & Geneeskunde, Ijzerwaren & Gereedschap, Industriële Apparaturen & Onderdelen, Instrumenten & Meters, Produceren & Verwerken Machine, Vervoer
Certificering Van Managementsysteem:
ISO 9000
Bedrijfsintroductie:
De productie en verkoop van de auto; de productie en verwerking van accessoires en hardware voor voertuigen; de verkoop van chemische producten; de import- en exportactiviteiten van verschillende grondstoffen en technologieën door zelfbediening en agenten, met uitzondering van grondstoffen en technologieën die door de staat worden beperkt of verboden. (Projecten die volgens de wet moeten worden goedgekeurd, kunnen alleen worden uitgevoerd nadat ze zijn goedgekeurd door de relevante afdelingen)