Basis Informatie.
Applications
Automobile, Tractor, Agricultural Machinery, Ect
Usage
Engine, Cpmpressor and Other Crank-Guide
Rolling Body
Roller Bearings
The Number of Rows
Single
Spherical
Non-Aligning Bearings
Load Direction
Radial Bearing
Outer Dimension
5mm-280mm
Beschrijving
Rod-use needle roller and cage assemblies K, KZK, KBK Bearings
We are manufacturers of needle roller bearings, needle bearings, roller bearings that are used for shaft size 10mm to 70mm, used in automobile, textile & general machinery.
Automotive Needle Roller bearing are used in applications where compact size is required and radial space is limited. This is because these needle roller bearing only carry pure radial load and can not limit the axial displacement of shaft relative to the housing.They have a smaller cross-section, higher load-carrying capacity and greater rigidity, which in turn gives size and weight reductions in machinery. We emerge as manufacturer and exporter of a vast range of needle bearings available in different sizes and tolerances for various applications.
Our Needle roller bearings and cage assemblies are available in single/double row, solid/split cage and metric as well as inch sizes. We also offer connecting rod bearings for special applications. Single and double row bearings are available with/without ribs, and with/without inner rings. Thrust bearings are available in single row roller and cage assemblies.
Needle roller bearings are used for shaft size 9mm to 60mm to be used in automobile, textile & general machinery. |
Product Precision Accuracy:
Mutual difference of needle rollers is 2μm, and the precision class is G2 (ISO GB309).
The assembly nominal width Bc is -0.20 for upper deviation and -0.5 for lower deviation.
It can also be defined according to the special requirements of customers.
Materials:
Material for needle roller is GCr15 bearing steel.
Material for cages can be quality low-carbon steel, low-alloy steel and reinforced nylon according to different occasions and requirements.
Special Directions:
The width of axial location is based on the assembly nominal-width Bc and conforms to the tolerance defined in H12 regulation.
When plastic cages are used (suffixed with TN), operating temperature is not allowed to surpass +1200C during continuous work.
Standardized shaft and bracket-hole tolerance should be chosen and internal running clearance of standard radial can be achieved by utilizing standard needle rollers.
Recommended Design for Raceway:
Shaft Diameter Nominal Dim | Bearing Bracket Hole Tol | Shaft Tolerance | Roughness max. |
mm | Operating Motion Clearance |
Over | Up to | >normal | Normal | |
--- | 80 | G6 | j5 | h5 | g6 | Ra0.2 (Rzl) |
H6 | h5 | g5 | f6 |
80 | 120 | G6 | h5 | g5 | f6 | Ra0.3 (Rzl.6) |
120 | --- | G6 | h5 | g5 | f6 | Ra0.4 (Rz2.5) |
H6 | | f5 | e6 |
Roundness max. | 25% of Diameter Tolerance |
Parallel max. | 50% of Diameter Tolerance |
The rod-use needle roller and cage assembliy is maninly used for engine,compressor and other crank huide.
The designation of the rod-use needle roller and cage assembly is composed of letter and number.The letter KZK reprents crank pine assembliy and KBK represents piston pin assembly.
The needle roller and cage assembly for KZK crank pin adapts M-type cage with relianle performance.It has special requirement.The surface of the cage can be silver-plated or copper-coated.
The needle roller and cage assembly for KBK pistion pin is different from KZK.It is internally guided on the piston pin,thus increasng the leagth of needle.
Specifications and dimensions
Shaft Diameter | Bearing Designation | Mass Approx | Borndary Dimensions | Basic Load Rating |
FW | Ew | Bc | Cr Dynamic | Cor Static |
mm | Current | Substituted | g | mm | N |
8 | KZK8×12×8 | 19242/8 | 1.9 | 8 | 12 | 8 | 4700 | 4580 |
10 | KZK10×14×10 | 29242/10 | 3.3 | 10 | 14 | 10 | 5000 | 5160 |
12 | KZK12×15×3 | 49241/12 | 3.6 | 12 | 15 | 13 | 5300 | 7400 |
KZK12×16×10 | 29242/12 | 3.5 | 12 | 16 | 10 | 6100 | 6900 |
KZK12×16×11 | -- | 3.7 | 12 | 16 | 11 | 6200 | 7100 |
KZK12×17×10 | 19243/12 | 5 | 12 | 17 | 10 | 7020 | 7020 |
KZK12×18×10 | 19242/12 | 7.8 | 12 | 18 | 10 | 7400 | 7200 |
14 | KZK14×18×10 | 29241/14 | 4 | 14 | 18 | 10 | 7100 | 8500 |
KZK14×19×10 | 19242/14 | 5.5 | 14 | 19 | 10 | 7300 | 7600 |
KZK14×19×12 | -- | 7.5 | 14 | 19 | 12 | 7460 | 7950 |
KZK14.4×20.4×10 | -- | 6.5 | 14 | 20.4 | 10 | 8100 | 7800 |
15 | KZK15×19×9 | -- | 5 | 15 | 19 | 9 | 6800 | 7100 |
KZK15×19×10 | 29241/15 | 6 | 15 | 19 | 10 | 7200 | 8400 |
KZK15×20×10 | 19242/15 | 7.5 | 15 | 20 | 10 | 7800 | 9100 |
KZK15×21×10 | -- | 8.5 | 15 | 21 | 10 | 8400 | 10500 |
KZK15×21×11 | -- | 9.5 | 15 | 21 | 11 | 8500 | 10700 |
KZK15.2×22.2×12 | -- | 11.5 | 15 | 22.2 | 12 | 8600 | 11100 |
16 | KZK16×20×10 | 29241/16 | 5.8 | 16 | 20 | 10 | 8200 | 9200 |
KZK16×20×24 | 79241/16 | 6.3 | 16 | 20 | 24 | 8700 | 9400 |
KZK16×21×10 | 19242/16 | 5.8 | 16 | 21 | 10 | 8800 | 9800 |
KZK16×22×12 | 19243/16 | 9.5 | 16 | 22 | 12 | 11000 | 11900 |
KZK16×22×14 | -- | 11 | 16 | 22 | 14 | 13200 | 13930 |
17 | KZK17×21×10 | 29241/17 | 6.7 | 17 | 21 | 10 | 7600 | 9000 |
KZK17×23×11 | -- | 9.5 | 17 | 23 | 11 | 8100 | 11300 |
18 | KZK18×24×10 | 29241/18 | 6.9 | 18 | 22 | 10 | 7600 | 9800 |
KZK18×22×24 | -- | 7.2 | 18 | 22 | 24 | 10100 | 17200 |
KZK18×24×11.6 | 19242/18 | 10 | 18 | 24 | 11.6 | 11600 | 13100 |
KZK18×24×12 | 19243/18 | 10 | 18 | 24 | 12 | 11600 | 13100 |
KZK18×24×13.3 | -- | 12.4 | 18 | 24 | 13.3 | 9000 | 10700 |
KZK18×4×13.5 | -- | 12.4 | 18 | 24 | 13.5 | 9000 | 10700 |
KZK18×24×15 | 29243/18 | 14 | 18 | 24 | 15 | 13200 | 15500 |
19 | KZK19×25×16 | 19244/19K | 13.9 | 19 | 25 | 16 | 12100 | 15500 |
KZK19×28×14 | -- | 20 | 19 | 28 | 14 | 12100 | 15000 |
20 | KZK20×25×16 | -- | 12 | 20 | 25 | 16 | 9900 | 12300 |
KZK20×26×12 | 19243/20 | 9.6 | 20 | 26 | 12 | 10100 | 12500 |
KZK20×26×14 | -- | 12 | 20 | 26 | 14 | 12600 | 16700 |
KZK20×26×17 | 9246/20 | 17 | 20 | 26 | 17 | 12700 | 17600 |
22 | KZK22×28×13 | -- | 15 | 22 | 28 | 13 | 11900 | 16500 |
KZK22×28×14 | -- | 16 | 22 | 28 | 14 | 12600 | 16800 |
KZK22×28×15 | 29242/22 | 16.7 | 22 | 28 | 15 | 13500 | 18500 |
KZK22×28×16 | 29243/22K | 18 | 22 | 28 | 16 | 14400 | 20100 |
KZK22×29×15 | -- | 15.2 | 22 | 29 | 15 | 17800 | 21800 |
KZK22×29×16 | 19244/22 | 19 | 22 | 29 | 16 | 17800 | 21800 |
KZK22×30×16 | SZ-432 | 25.7 | 22 | 30 | 16 | 18700 | 22300 |
23 | KZK23×29×13 | -- | 12 | 23 | 29 | 13 | 10000 | 11300 |
KZK23×30×14 | -- | 19.4 | 23 | 30 | 14 | 9350 | 10100 |
KZK23×30×16 | -- | 22 | 23 | 30 | 16 | 9780 | 11800 |
23.1 | KZK23.1×28.1×14 | 29242/23.1 | 12.9 | 23.1 | 28.1 | 14 | 10600 | 15800 |
24 | KZK24×30×15 | -- | 17 | 24 | 30 | 15 | 11200 | 13700 |
KZK24×30×16 | -- | 18 | 24 | 30 | 16 | 11200 | 13700 |
25 | KZK25×30×28 | 69245/25 | 24 | 25 | 30 | 28 | 13300 | 15200 |
KZZ25×31×12 | 19243/25K | 16 | 25 | 31 | 12 | 8700 | 8800 |
KZK25×31×17 | 39243/25 | 23 | 25 | 31 | 17 | 9200 | 9750 |
KZK25×31×20 | 49243/25 | 26 | 25 | 31 | 20 | 9700 | 10600 |
KZK25×32×16 | 19244/25 | 22.7 | 25 | 32 | 16 | 18200 | 23100 |
25.1 | KZK25.1×30.1×14 | -- | 14.1 | 25.1 | 30.1 | 14 | 13700 | 19000 |
26 | KZK26×34×16 | 9248/26 | 25 | 26 | 34 | 16 | 11700 | 17500 |
28 | KZK28×33×14 | -- | 15.7 | 28 | 33 | 14 | 13200 | 21900 |
KZK28×34×14 | -- | 20 | 28 | 34 | 14 | 16500 | 20700 |
KZK28×35×15 | -- | 25 | 28 | 35 | 15 | 18000 | 22000 |
KZK28×35×16 | 19243/28 | 27 | 28 | 35 | 16 | 18900 | 23000 |
KZK28×36×16 | -- | 29.1 | 28 | 36 | 16 | 19500 | 27000 |
KZK28×38×13.6 | -- | 40 | 28 | 38 | 13.6 | 17300 | 20300 |
30 | KZK30×36×16 | -- | 28.5 | 30 | 36 | 16 | 18900 | 22800 |
KZK30×37×16 | 19243/30 | 29 | 30 | 37 | 16 | 21500 | 30500 |
KZK30×38×16 | -- | 34.4 | 30 | 38 | 16 | 22700 | 32600 |
KZK30×38×18 | -- | 38.8 | 30 | 38 | 18 | 26200 | 39600 |
32 | KZK32×40×22 | 19244/32K | 50 | 32 | 40 | 22 | 27800 | 39300 |
KZK32×42×20 | -- | 54 | 32 | 42 | 20 | 29000 | 41000 |
35 | KZK35×42×20 | 29243/35 | 40 | 35 | 42 | 20 | 26000 | 40500 |
38 | KZK38×46×20 | 19244/38 | 50 | 38 | 46 | 20 | 31100 | 43000 |
40 | KZK40×48×17 | -- | 50 | 40 | 48 | 17 | 29000 | 39000 |
KZK40×48×20 | 19244/40 | 54 | 40 | 48 | 20 | 32500 | 51000 |
Shaft Diameter | Bearing Designation | Mass Approx | Borndary Dimensions | Basic Load Rating |
FW | Ew | Bc | Cr Dynamic | Cor Static |
mm | Current | Substituted | g | mm | N |
8 | KBK8×11×10 | 39241/8 | 1.85 | 8 | 11 | 10 | 3500 | 4000 |
KBK8×12×10 | 29242/8 | 2 | 8 | 12 | 10 | 3700 | 4100 |
9 | KBK9×12×11.5 | -- | 2.4 | 9 | 12 | 11.5 | 4200 | 4800 |
KBK9×12×13 | 49241/9 | 2.75 | 9 | 12 | 13 | 4600 | 5800 |
KBK9×12×14 | -- | 3.5 | 9 | 12 | 14 | 4700 | 5900 |
KBK9×13×12 | 39242/9 | 4.1 | 9 | 13 | 12 | 5300 | 5700 |
KBK9×13×12.5 | -- | 4.9 | 9 | 13 | 12.5 | 5300 | 5700 |
KBK9×13×13 | 39242/9 | 5.1 | 9 | 13 | 13 | 5350 | 5600 |
10 | KBK10×13×8 | 29241/10 | 2 | 10 | 13 | 8 | 4000 | 5000 |
KBK10×13×10 | 39241/10 | 2.4 | 10 | 13 | 10 | 4200 | 5200 |
KBK10×13×14.5 | 59241/10 | 5.1 | 10 | 13 | 14.5 | 5400 | 6600 |
KBK10×13×16 | -- | 5.7 | 10 | 13 | 16 | 6800 | 7700 |
KBK10×14×10 | 29242/10 | 3.4 | 10 | 14 | 10 | 4400 | 4600 |
KBK10×14×11 | -- | 4 | 10 | 14 | 11 | 5200 | 5700 |
KBK10×14×12 | -- | 4.5 | 10 | 14 | 12 | 5400 | 6000 |
KBK10×14×12.5 | -- | 4.85 | 10 | 14 | 12.5 | 5600 | 6200 |
KBK10×14×13 | 39242/10 | 5.4 | 10 | 14 | 13 | 5600 | 6200 |
11 | KBK11×15×17 | -- | 5 | 11 | 15 | 17 | 5200 | 7000 |
12 | KBK12×15×13 | 49241/12 | 4.6 | 12 | 15 | 13 | 5500 | 7300 |
KBK12×15×14.3 | -- | 5.4 | 12 | 15 | 14.3 | 5800 | 7700 |
KBK12×15×15 | 59241/12 | 5.6 | 12 | 15 | 15 | 5900 | 7800 |
KBK12×15×16.6 | -- | 6.2 | 12 | 15 | 16.6 | 6800 | 9900 |
KBK12×15×17 | 69241/12 | 6.3 | 12 | 15 | 17 | 7000 | 10000 |
KBK12×15×17.5 | -- | 6.5 | 12 | 15 | 17.5 | 7000 | 10000 |
KBK12×16×13 | 39241/12 | 6.7 | 12 | 16 | 13 | 6300 | 7600 |
KBK12×16×15 | 49242/12KY | 7.9 | 12 | 16 | 15 | 7500 | 9000 |
KBK12×16×15.5 | -- | 8.3 | 12 | 16 | 15.5 | 7600 | 10000 |
KBK12×16×16 | 59241/12 | 8.5 | 12 | 16 | 16 | 7800 | 9300 |
KBK12×16×17 | 59242/12 | 9.2 | 12 | 16 | 17 | 7900 | 9400 |
KBK12×17×14 | -- | 8 | 12 | 17 | 14 | 8000 | 9500 |
KBK12×17×14.3 | -- | 8.4 | 12 | 17 | 14.3 | 8000 | 9500 |
KBK12×17×14.8 | -- | 8.8 | 12 | 17 | 14.8 | 8300 | 9800 |
13 | KBK13×17×14.5 | -- | 7.1 | 13 | 17 | 14.5 | 8300 | 10200 |
KBK13×17×17.5 | -- | 8.6 | 13 | 17 | 17.5 | 9500 | 12100 |
14 | KBK14×18×10 | 29241/14 | 4.6 | 14 | 18 | 10 | 6260 | 7400 |
KBK14×18×12 | -- | 6.6 | 14 | 18 | 12 | 6380 | 7570 |
KBK14×18×13 | 39241/14 | 7.6 | 14 | 18 | 13 | 7300 | 8700 |
KBK14×18×14 | -- | 6.33 | 14 | 18 | 14 | 7400 | 8800 |
KBK14×18×14.5 | -- | 8 | 14 | 18 | 14.5 | 7400 | 8800 |
KBK14×18×15 | 49241/14 | 8.3 | 14 | 18 | 15 | 7600 | 8990 |
KBK14×18×16.5 | -- | 9.6 | 14 | 18 | 16.5 | 8800 | 9700 |
KBK14×18×17 | 59241/14 | 10.1 | 14 | 18 | 17 | 8900 | 9800 |
KBK14×18×20 | 69241/14 | 12 | 14 | 18 | 20 | 9000 | 10100 |
KBK14×18×21 | -- | 13 | 14 | 18 | 21 | 10500 | 12400 |
KBK14×18×22 | -- | 14 | 14 | 18 | 22 | 11100 | 13100 |
KBK14×19×17 | 49242/14K | 10.3 | 15 | 19 | 17 | 11100 | 13100 |
15 | KBK15×19×10 | 29241/15Y | 5 | 15 | 19 | 10 | 6500 | 8600 |
KBK15×19×18 | -- | 11 | 15 | 19 | 18 | 9900 | 11300 |
KBK15×19×19 | -- | 12 | 15 | 19 | 19 | 10100 | 12800 |
KBK15×19×20 | 69241/15 | 12.9 | 15 | 19 | 20 | 11300 | 15500 |
KBK15×20×24 | SZ-433 | 18.6 | 15 | 20 | 24 | 14100 | 20000 |
16 | KBK16×20×19 | -- | 12 | 16 | 20 | 19 | 11700 | 16800 |
KBK16×20×20 | 69241/16Y | 13.4 | 16 | 20 | 20 | 12900 | 17600 |
KBK16×20×21 | -- | 14 | 16 | 20 | 21 | 12900 | 17600 |
KBK16×20×22 | -- | 15 | 16 | 20 | 22 | 13000 | 18700 |
KBK16×21×19 | 59242/16 | 16 | 16 | 21 | 19 | 13000 | 18700 |
17.5 | KBK17.5×22×16 | -- | 9.3 | 17.5 | 22 | 16 | 11000 | 16300 |
KBK18×22×22 | -- | 16.9 | 18 | 22 | 22 | 11500 | 17700 |
KBK18×22×23.5 | -- | 18 | 18 | 22 | 23.5 | 11900 | 19000 |
KBK18×22×24 | -- | 18.4 | 18 | 22 | 24 | 12000 | 20000 |
KBK18×22×25 | -- | 19.1 | 18 | 22 | 25 | 12700 | 20100 |
KBK18×23×21 | -- | 18 | 18 | 23 | 21 | 9900 | 10100 |
KBK18×23×23 | 69242/18 | 20 | 18 | 23 | 23 | 10500 | 12000 |
KBK18×24×20 | 49243/18 | 20 | 18 | 24 | 20 | 20000 | 25000 |
20 | KBK20×24×30 | -- | 22.1 | 20 | 24 | 30 | 14900 | 25500 |
KBK20×25×22 | -- | 19.5 | 20 | 25 | 22 | 15200 | 22300 |
KBK20×25×25 | -- | 23 | 20 | 25 | 25 | 17100 | 24000 |
No collar slab roller and cage assemblies
Shaft Diameter | Bearing Designation | Mass Approx | Borndary Dimensions |
FW | Ew | Bc |
mm | Current | Substituted | g | mm |
19.051 | KNL19.051×28.588×36.75 | 64903 | 70 | 19.051 | 28.588 | 36.75 |
19.051 | KNL19.051×28.588×43.25 | 64904 | 80 | 19.051 | 28.588 | 43.25 |
20 | KNL20×30.2×18 | 64704 | 40 | 20 | 30.02 | 18 |
20.612 | KNL20.612×3.325×35 | 864904 | 96 | 20.612 | 33.325 | 35 |
20.638 | KNL20.638×33.338×36.75 | 64705 | 92 | 20.638 | 33.338 | 36.75 |
25 | KNL25×38×24.7 | 64805 | 82 | 25 | 38 | 24.7 |
25.4 | KNL25.4×41.288×60.4 | 64905 | 265 | 25.4 | 41.288 | 60.4 |
27.71 | KNL27.71×42.825×44.1 | 64906 | 183 | 27.71 | 42.825 | 44.1 |
28.575 | KNL28.575×41.275×34.925 | 64806 | 122 | 28.575 | 41.275 | 34.925 |
28.578 | KNL28.578×41.275×40 | 94626 | 155 | 28.578 | 41.275 | 40 |
29.975 | KNL29.975×42×31 | 9148/30 | 81 | 29.975 | 42 | 31 |
29.975 | KNL29.975×42×44.1 | 64706 | 150 | 29.975 | 42 | 44.1 |
31.75 | KNL31.75×44.45×31.75 | 864807 | 115.8 | 31.75 | 44.45 | 31.75 |
31.9 | KNL31.9×41.46×32 | 31.9×41.46×32 | 95 | 31.9 | 41.46 | 32 |
32 | KNL32×50×45 | 30643/32 | 272 | 32 | 50 | 45 |
32 | KNL32×52×49 | 64907 | 329 | 32 | 52 | 49 |
37.96 | KNL37.96×53.9×36 | 37.96×53.9×36 | 208.3 | 37.96 | 53.9 | 36 |
40 | KNL40×60×30 | 10643/40 | 248 | 40 | 60 | 30 |
52.412 | KNL52.412×71.425×42.3 | 864911 | 441 | 52.412 | 71.425 | 43.3 |
65 | KNL65×89×58.9 | 864913 | 943 | 65 | 89 | 58.9 |
74 | KNL74×106×57.9 | 864915 | 1563 | 74 | 106 | 57.9 |
Radial needle roller and cage assemblies bearing Models:
Bearing Number | Bearing Number | Bearing Number | Bearing Number | Bearing Number | Bearing Number | Bearing Number |
K7x11x15 | K14x17x17 | K16x22x16 | K20x24x18 | K24x28x36 ZW | K27x34x16 | K30x44x26 |
K8x11x8 TN | K14x18x8 | K16x22x20 | K20x25x40 ZW | K24x29x13 | K27x34x17 | K32x36x15 |
K8x11x9 | K14x18x10 | K16x23x14 | K20x26x12 | K24x30x10 | K28x32x21 | K32x37x13 |
K8x11x10 TN | K14x18x13 | K16x24x20 | K20x26x13 | K24x30x13 | K28x33x10 | K32x37x17 |
K8x11x13 TN | K14x18x14 | K17x20x10 | K20x26x16 | K24x30x17 | K28x33x13 | K32x37x27 |
K8x12x8 TN | K14x18x15 | K17x21x10 | K20x26x17 | K24x30x22 | K28x33x17 | K32x38x20 |
K8x12x10 TN | K14x18x16 | K17x21x13 | K20x26x20 | K24x30x30 ZW | K28x33x27 | K32x38x23 |
K8x12x12 | K14x18x17 | K17x21x15 | K20x28x16 | K24x30x31 ZW | K28x34x17 | K32x38x25 |
K8x12x13 | K14x18x28 ZW | K17x21x17 | K20x28x20 | K24x36x23 | K28x34x20 | K32x38x26 |
K9x12x9 | K14x19x13 | K17x22x20 | K20x28x25 | K25x29x10 | K28x35x15 | K32x39x14 |
K9x12x10 TN | K14x19x18 | K17x23x14 | K20x30x30 | K25x29x13 | K28x35x16 | K32x39x16 |
K9x12x11 | K14x20x10 | K17x23x15 | K21x25x10 | K25x30x10 | K28x35x17 | K32x39x18 |
K9x12x13 TN | K14x20x11 | K17x27x17 | K21x25x13 | K25x30x12 | K28x35x18 | K32x40x20 |
K10x13x9 | K14x20x12 | K18x22x8 | K21x25x17 | K25x30x13 | K28x35x27 | K32x40x25 |
K10x13x10 TN | K15x18x14 | K18x22x10 | K22x26x8 | K25x30x17 | K28x36x20 | K32x40x36 |
K10x13x11 | K15x18x16 | K18x22x13 | K22x26x10 | K25x30x18 | K28x36x32 | K32x40x42 ZW |
K10x13x13 TN | K15x18x17 | K18x22x14 | K22x26x11 | K25x30x20 | K28x40x25 | K32x42x42 |
K10x13x16 TN | K15x18x22 ZW | K18x22x17 | K22x26x13 | K25x30x24 | K29x34x27 | K32x46x18 |
K10x14x10 TN | K15x19x10 | K18x22x20 | K22x26x14 | K25x30x26 ZW | K30x34x13 | K32x46x32 |
K10x14x13 TN | K15x19x11 | K18x23x20 | K22x26x17 | K25x31x14 | K30x35x11 | K34x44x26 |
K10x16x12 TN | K15x19x13 | K18x24x12 | K22x26x18 | K25x31x17 | K30x35x13 | K35x40x13 |
K11x14x10 | K15x19x14 | K18x24x13 | K22x27x15 | K25x31x20 | K30x35x17 | K35x40x17 |
K11x14x14 | K15x19x17 | K18x24x15 | K22x27x17 | K25x31x21 | K30x35x18 | K35x40x18 |
K12x15x9 TN | K15x19x20 | K18x24x20 | K22x27x40 ZW | K25x31x24 | K30x35x20 | K35x40x19 |
K12x15x10 TN | K15x19x22 ZW | K18x25x14 | K22x28x13 | K25x32x15 | K30x35x23 | K35x40x25 |
K35x40x26 ZW | K40x45x13 | K45x49x19 | K50x62x22 | K60x72x32 | K80x86x30 | K115x123x27 |
K35x40x27 | K40x45x17 | K45x49x31 ZW | K50x66x30 | K60x75x42 | K80x88x20 | K115x123x35 |
K35x40x30 ZW | K40x45x18 | K45x50x13 | K50x70x32 | K62x70x40 ZW | K80x88x22 | K120x127x24 |
K35x40x31 | K40x45x21 | K45x50x17 | K52x57x12 | K63x71x20 | K80x88x25 | K120x128x25 |
K35x40x32 ZW | K40x45x27 | K45x50x18 | K52x57x17 | K64x70x16 | K80x88x30 | K120x128x35 |
K35x41x12 | K40x45x29 | K45x50x20 | K52x59x18 | K65x70x20 | K80x88x40 ZW | K125x133x35 |
K35x41x14 | K40x46x17 | K45x50x27 | K52x60x24 | K65x70x30 | K80x88x46 ZW | K130x137x24 |
K35x41x40 ZW | K40x46x20 | K45x50x30 ZW | K55x60x17 | K65x73x23 | K80x88x55 ZW | K130x140x38 |
K35x42x16 | K40x46x40 ZW | K45x50x32 ZW | K55x60x20 | K65x73x27 | K80x90x25 | K130x140x45 |
K35x42x18 | K40x47x18 | K45x52x18 | K55x60x27 | K65x73x30 | K85x92x20 | K135x143x35 |
K35x42x20 | K40x48x20 | K45x52x21 | K55x60x30 | K65x75x27 | K85x93x25 | K135x145x38 |
K35x42x22 | K40x50x27 | K45x53x20 | K55x60x40 ZW | K68x74x20 | K85x93x30 | K140x150x43 |
K35x42x30 | K40x56x26 | K45x53x21 | K55x62x18 | K68x74x30 | K90x97x20 | K145x153x26 |
K35x42x45 ZW | K47x52x27 | K45x53x22 | K55x62x30 | K68x74x35 ZW | K90x97x30 | K150x160x43 |
K35x45x20 | K47x53x25 | K45x53x25 | K55x63x15 | K68x74x40 ZW | K90x98x25 | K150x160x46 |
K35x45x30 | K47x55x28 | K45x53x28 | K55x63x20 | K68x76x20 | K90x98x27 | K155x163x26 |
K35x45x41 | K47x55x28 | K45x53x35 | K55x63x24 | K70x76x20 | K90x98x30 | K160x168x22 |
K35x45x49 ZW | K48x53x17 | K45x59x18 | K55x63x25 | K70x76x30 | K90x98x50 ZW | K160x170x43 |
K35x50x23 | K40x55x45 | K45x59x32 | K55x63x32 | K70x78x20 | K95x103x20 | K160x170x46 |
K35x50x40 | K41x48x31 ZW | K45x59x36 | K55x63x32 ZW | K70x78x23 | K95x103x27 | K165x173x26 |
K36x40x29 TN | K41x48x35 | K45x60x40 | K55x63x35 | K70x78x25 | K95x103x30 | K170x180x43 |
K36x42x16 | K42x47x13 | K45x60x45 | K55x65x36 | K70x78x30 | K95x103x40 ZW | K170x180x46 |
K37x42x17 | K42x47x17 | K46x53x36 ZW | K55x73x45 | K70x78x46 ZW | K100x107x21 | K175x183x32 |
K37x42x27 | K42x47x25 | K47x52x17 | K58x63x17 | K70x80x30 | K100x108x20 | K185x195x37 |
K37x42x28 ZW | K42x47x27 | K48x54x19 | K58x64x19 | K72x80x20 | K100x108x27 | K195x205x37 |
K37x44x15 | K42x47x30 ZW | K49x55x32 ZW | K58x64x32 ZW | K73x79x20 | K100x108x30 | K210x220x42 |
K37x44x18 | K42x47x34 ZW | K49x65x38 | K58x65x18 | K73x79x30 | K100x110x29 | K220x230x42 |
K37x44x19 | K42x49x14 | K50x55x13.5 | K58x65x36 ZW | K73x79x50 ZW | K103x113x43 | K240x250x42 |
K37x45x26 | K42x49x17 | K50x55x17 | K60x65x20 | K75x80x14 | K105x112x21 | K265x280x50 |
K37x47x19 | K42x50x13 | K50x55x20 | K60x65x30 | K75x81x20 | K105x113x20 | |
K38x41x9 | K42x50x18 | K50x55x30 | K60x66x33 ZW | K75x81x30 | K105x113x27 | |
K38x43x17 | K42x50x20 | K50x56x23 | K60x66x40 ZW | K75x83x20 | K105x113x30 | |
K38x43x27 | K42x50x40 ZW | K50x57x18 | K60x68x17 | K75x83x23 | K105x115x29 | |
K38x46x20 | K43x48x17 | K50x58x14 | K60x68x20 | K75x83x30 | K110x117x24 | |
K38x46x32 | K43x48x18 | K50x58x20 | K60x68x23 | K75x83x35 ZW | K110x118x24 | |
K38x50x33 | K43x48x27 | K50x58x25 | K60x68x25 | K75x83x40 ZW | K110x118x30 | |
K39x44x24 | K43x50x18 | K50x58x35 | K60x68x30 ZW | K75x83x46 ZW | K110x118x34 | |
K39x44x26 ZW | K44x50x22 | K50x58x56 ZW | K60x68x34 ZW | K77x85x55 ZW | K110x120x29 | |
K40x44x13 | K44x50x30.5 ZW | K50x60x32 | K60x68x36 | K80x86x20 | K110x120x45 | |
We Offer not only products, but also..
1)Superiority: Continuous improvement is deemed as our permanent pursuits
2)Technology:We have introduced many advanced equipments and mature techniques,to meet various of customers' requirements. High precision,low noise,long-life and excellent reliablity are our product's features.
3)Choice: We can adjust the price according to your market demands, and also can launch a series of promotional activities in a bad economic environment .
4)Small orders can be accepted. We also can provide samples to you if you want.
5)Powerful business prospects: in order to expand more global businesses , we are ready to find some good agents (like VIP customer ) to start business in all over the world.
6)Generally shipped from Shanghai Port, but sometimes Ningbo Port, QingDao Port can be choice as your required.
7)The factories have about 300 workers, the number of highly skilled workers is 140 .15 from QA&QC department to exam each produce process to assure quality. Many items for you optional, because we offer OEM service,
Adres:
Changhong West Road 182, Wujin District, Changzhou, Jiangsu, China
Soort bedrijf:
Fabrikant/fabriek
Zakelijk Bereik:
Auto Parts, Ijzerwaren & Gereedschap, Industriële Apparaturen & Onderdelen, Metallurgische, Mineralen & Energie, Produceren & Verwerken Machine
Certificering Van Managementsysteem:
ISO 9001
Bedrijfsintroductie:
Changzhou Lisongtai Industrial Motion Technology Co., Ltd, is een fabrikant gespecialiseerd in het produceren van diverse eenrichtingslagers, eenrichtingskoppeling, vrijloopkoppeling, naaldlagers. Meer dan 2000 standaardmodel van eenrichtingsdrager meer dan 1000 benamingen van metrische en inch-serie naaldlagers worden regelmatig geproduceerd en gebruikt voor motorfietsen, elektrisch en door de lucht aangedreven gereedschappen, printers, lichte en textielindustrie, machines, bouwmachines, auto′s Trucks en kantoorapparatuur in binnenlandse en wereldwijde markten. Bovendien worden er speciale lagers geleverd in overeenstemming met de eisen van de klant voor diverse toepassingen. We hebben onze producten geëxporteerd naar Korea, Iran, Turkije, Bulgarije, Roemenië, Rusland, Italië, Noorwegen, de VS, Canada, Wat
zijn wij?
Onze fabriek was gevestigd in de economisch ontwikkelde kuststad-industriewijk-Wujin Changzhou stad Jiangsu provincie. Hier is het vervoer handig, het zal slechts een uur naar Shanghai met de trein.
Wat wordt het hoofdproduct geproduceerd?
Eenweglagers, eenwegkoppeling, vrijloopkoppeling, tegenaanslagen, nokkenkoppeling, Naaldlager, steunrol en krommingslagers, cilindrische rollagers. Druklagers met een valse zitting. We hebben grote voorraden, en we accpecteren ook productie voor niet-standaard producten, tekeningen of monsters van klanten.
Wat is ons voordeel?
Product: In 1999 begon onze baas als ingenieur eenrichtingslagers te ontwikkelen en ontwerpen toen hij in een grote lagerfabriek werkte. Tot nu toe hebben we successen bij de ontwikkeling van de BB-serie, de MZ-serie, de TFS-serie, de NSS-serie RSBW-serie, die, om bevestigd te worden, een hoog kwaliteitsniveau bereiken dat vergeleken kan worden met het merk Tsubaki van Janpan.
Quliaty equivalent aan Stieber-koppeling, GVN-koppeling, Ringspann-koppeling, Formsprag-koppeling, NSK-koppeling, ect.
GFR-serie, DC-serie, ASNU-serie, NFR-serie, GFK-serie, NF-serie, AE-serie, AA-serie, ECT, die nog bevestigd moet worden, bereiken in een hoog kwaliteitsniveau kan worden vergeleken met HET MERK STIEBER uit het Duits.
FE-serie, FP-serie, FND-serie, FKN-serie eenwegkoppelingslager, dat, om te bevestigen, een hoog kwaliteitsniveau bereikt, kan worden vergeleken met het GVN-merk uit Duitsland.
Onze klanten de hoogste servicestandaard in onze branche blijven bieden. Het is onze bedoeling om voorop te blijven lopen op het gebied van het leveren en ontwerpen van lagers en om onze ontwikkeling naar nieuwe factoren voort te zetten.
Fabrieksapparatuur: Het bedrijf bezit de meest geavanceerde CNC automatische productielijn, automatische assemblagelijn en een verscheidenheid aan testapparatuur. De lagers die we hebben vervaardigd zijn allemaal laag geluidsniveau, lage vibratie, lage wrijving, hoge precisie, hoge afdichting, hoge draaisnelheid en lange levensduur.
Quantility control: 2011 we hebben de ISO9001: 2008 kwaliteitsmanagement systeem certificering gekregen, , al onze producten worden verstuurd voor meerdere malen inspectie. We leveren ook gedetailleerde tekeningen en bieden waar nodig aan.
Wat is de toepassing?
Wordt veel gebruikt in transportmachines, reduceermachines, hijsmachines, liften, auto′s, huishoudelijke apparaten, textielmachines, drukmachines, voedselmachines en mijnmachines, etc.
waar zijn onze producten gezouten?
Onze producten over de hele wereld spelen een belangrijke rol
in Duitsland, Groot-Brittannië, Nederland, Spanje, Italië,
In Indiaas, Indonesië, de Filipijnen, Thailand,
in Iran, Dubai
in Mexico moet
in de Verenigde Staten „Quality and Service” uw belangrijkste zorgen zijn die we in de praktijk hebben gebracht. Blader door onze productcategorie en laat ons uw vragen weten. Ons doel is om onze klanten te voorzien van goede kwaliteit en de beste concurrerende prijzen. Met voldoende voorraad, grote voorraad en handig transport verwelkomen we nieuwe klanten van harte om ons te bezoeken.