AT600N ATS-controller is een intelligente dubbele voedingsmodule met programmeerbare functie, automatische meting, LCD-display, en
digital communication. The combined digital intelligence and network. Automatic measure and check can terminate
traffic provider. IT is a ideal option for ATS. AT600N ATS controller is made from microprocessor as the kern
neewkeurig detect 2-way-3-fase spanning in extended-spectrum, and also accurate cordeel and off the power off switch below the
abnormal voltage (over and under voltage, miss fase, and over and under frequency). This controller has complete changement
AATS (Automated Transfer System) application may direct used for Intelligente ATS, Contactor ATS,
Circuit Breken ATS etc. het heeft een compacte structuur, geavanceerde circuits, eenvoudige bedrading en hoge bedrijfszekerheid, en is van dien duur
veel gebruikt in electronic energie, telecommunicatie, aardolie, steak, metallurgie, Spoorwegen, general administration,
Intelligent Building, Electrical devices, automatic check and test system etc. PRESTATIES and KENMERKEN voeding: DC(8 ~
35)V behuizing Afmetingen: 209*153*55(mm) Paneelmes: 186*141(mm) Operationele Temp. : (-25 ~ + 70) Gewicht: 0.8kg Type systeem kan
Set for: Netspanning (1 #) en netspanning (2 #), netspanning (1 #) en generator (2 #), generator (1 #) en netspanning (2 #), generator (1 #) en generator (2
#). LCD-display met achtergrondverlichting en 128 x 64 pixels, optiescherm van Chinees en Engels, drukknopbediening. Meaens and appears 2-way 3 phase spanning and
Frequentie: 1 #2 # lijn-lijn spanning (UAB, UBC, Uca) lijn-lijn spanning (UAB, UBC, uca) lijn-Natuur spanning (UA, UB, UC)
Line-Natuurspanning (UA, UB, uc) Frequentie (F1) Frequentie (F2) measure and show active moves, disk moves, power
Factor and 3 fase step; alarm over STroom; over/under spanning, fase, reverse fasecuration, over/onder frequency
bescherming. Automobile/handmatic mode. In the handm mode, power switch to open or did; All parameters can be
are set on site. With two different password that forgot authorized personal operation only. While
genset testing ATS controller can be set hetzij on-load or Off-load mode. ATS Controller has function
Automatic Reclose. Connect out signal can be set as on intervall or as continued output. Also also you can be suitable
ATS from a neutral position, two neutral position and changes. For 2 enased neutral line for Generator and, also appear
Netspanning. Real-time klok (RTC). Event Log can record 99 items circulair. Time schedule can be set on the maneuth of
wekelijkse basis and tale can be set as on- load or off-load. Canally work two generatoren in a cycle, even the
set running time and crank rest time are set. Rear range of DC power (8V to 35V). Max. 80 V DC-ingang kan worden
In een oogwenk, or wordt geleverd via de HWS560-module (ingang AC 85 V ~ 560 V, uitgang DC 12 V). Brear space between
AC input connection. Max. 625 V spanning. With default installed RS485 communication interface. With „Remote
Besturing, remote measure, remote communication” functie door het Modbus communication protocol. CAN the current status of controller
(Including switch digital inserving, overspanning, and under spanning etc.). Geschikt voor diverse AC systemen (3-fase 4-drads,
3-fase 3-drads, single-fase 2-draad, and 2-fase 3-draad). Modulaire ontwerp, vlam-statief ABS plastic behuizing, plug-in aansluitingen
and embedded installation. Compactheid struction with easy installation.