Air to Water Heat Exchanger Hot / Chilled Water Direct Expansion Coils Dx Coil

• After-sales Service: gratis reserveonderdelen
• Garantie: 12 maanden
• certificaat: ISO
• Toepassing: verwarmer, cooler, condensator
• Beginsel: lucht-naar-water-warmtewisselaar
• Stijl: buis en ribben
• Model NR.: Op maat gemaakt
• Materiaal: roestvrij staal, koper, aluminium, titanium
• opties voor materiaal van behuizing: volledige g-90 gegalvaniseerd staal standaard met optie
• opties voor fin-materiaal: vinnen per inch verkrijgbaar van 6 tot 16
• opties voor buisgrootte: 5/8′′prime; o.d, 1/2′′prime; o.d, 3/8′′prime; o.d.
• Transportpakket: Wooden Package
• Specificatie: According to the product
• Handelsmerk: VRCOOLER
• Oorsprong: China
• Productiecapaciteit: 10000PCS/Months

Beschrijving

Product Description

A direct expansion air conditioning unit, also called a DX unit, cools indoor air using a condensed refrigerant liquid. The DX coil cools air by passing the condensed refrigerant through a heat exchanger inside the building to be cooled. In this part of the unit, called the evaporator, the refrigerant expands as it absorbs heat, eventually converting to a gas.
Advantages of Direct Expansion System: low installation costs, ease to adjust and balance the system, minimum ceiling or wall space needed, low energy consumption, low maintenance costs. individual section can be operated without running the entire system in the building, comfort under varying load conditions and good relative humidity control.

Direct expansion coil or DX coil is VRcooler's most important production. Compared with water coils, not only more difficult process , it requires more complicated copper fittings brazing and circuit design, more high-levels inspection standards. The quality and stability of products also need to be higher level to prevent leakage of filled refrigerant.

In direct expansion system, there is possibility of refrigerant leakage for long distances, and the cost of the refrigerant would be high. Also the pressure drop in the line would decrease evaporator coefficient of performance and efficiency.The direct expansion coil is preferred for air conditioning purposes, where the evaporator is very near to the compressors. This is direct method of cooling the substance and, therefore quite efficient.

 

Detailed Photos

 

Raw Material:

TUBE	Copper	Titanium	Aluminum	Carbon steel
	Stainless steel 304	Stainless steel 316	Cu-Ni(90/10)	Cu-Ni(70/30)
Fin	Copper	Aluminum	Stainless steel
	Carbon steel	Titanium
Frame	Galvanized	Aluminum	Stainless steel

We make tubes of different diameters, with a greater number of thicknesses and different materials such as copper, stainless steel and cupronickel. The tube expansion, during the flaring phase, allows a perfect contact between the tubes and the fins and as a consequence it assures efficient thermal exchange.


The fins, made of aluminium, prevarnished aluminium or copper, are pressed by means of a particular ondulation that increases the thermal exchange between the air and the fin reducing the load losses on the air side and encouraging at the same time the flow of condensation or defrosting water. The fins can also be made from 316L stainless steel for installations where the thermal exchange is in aggressive environments such as the food sector or exchangers used in salty environments. The main geometries, achievable according to the chosen material, are reported following below; besides, according to the application chosen by the customer and to the thickness of the requested strap, it will be possible to make a major or minor pitch between the fins.


The Plates, Thanks to its accurate three-dimensional design and to modern punchers and numerical control bending machines, it is possible to make carpentry and structures of different sizes that can be adapted to any construction requirement of the customer.

 

Our Advantages

We have customized products for many customers, following are some projects we did before.

We can provide designing data and prodcution drawings.

We promise we use the design software sold by a well-known European HAVC software company. Through 8 years of cooperation with them, we have designed, processed and exported dry coolers to various countries all around the world.

All of customers feedback is that the actual cooling performance is almost the same as the theoretical design value.

 

Packaging & Shipping

The normal package is wooden box. If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

Company Profile

Changzhou Vrcoolertech Refrigeration Co.,Ltd specializes in researching, manufacturing and exporting Heat Exchangers, Evaporators, Condensers, air cooler and other heat transfer equipments for the varied industries since 2004.

We are committed to quality products and services to meet our customer's expectations and the needs of industrials. We are dedicated to our mission and goal and we believe in long term business relationship with our customers which is based on integrity, responsiveness and quality.